|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
Pneumatic linear manipulator with pneumatic gripping tool for parcels of ceramic tiles or for any part that can be gripped pushing on the sides.
Max capacity 200 kg.
Max work radius 7 m.
Max vertical stroke up to 2100 mm.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
|
The manipulator with cable makes it possible to handle paperboards going from 0 to 300 kg with a suction cup gripping while optimizing the operating areas available, in perfect ergonomics and in full safety for the men and the material.
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
| ... products without technical information |
| |
|
|
|
|
FlexLink offers a wide assortment of aluminum profiles and accessories such as connectors, fasteners, feet, etc to build machine frames and safety enclosures. Pre-assembled enclosure sections and sliding door profiles as well as linear units are also available.
Structural system XC (module 44 mm)
Structural system XC is based on aluminium beams with T-slots for easy interconnections and attachment of external devices. The system is based on the 44 mm module. Beam sizes in the XC system range from 24x24 mm up to 176x88 mm.
The system offers sturdy components which provide high load capacity for both static and linear motion systems. It is used within a wide range of applications, from frameworks, workbenches and enclosures to special machinery, pick and place units and gantry robots.
Structual system XF (module 30 mm)
Structual system XF consists of a range of standard components with emphasis on enclosure applications based on the 30 mm module. It includes two basic beam types, the support beams (XFBM) in cross-sectional dimensions 30 mm x 30 mm and 30 mm x 60 mm as well as several enclosure beams (XFEB) intended for enclosure frameworks. The system also includes other components for enclosures, including hinges, handles, strips for nets and panels, etc.
|
|
aluminum framing for factory automation
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. International quality, Chinese prices, believe that we can bring to you more suprise.
|
|
Need a special configuration, size, or color? It's easy to convert your specs to reality with customizable features from Zero Manufacturing. Our modified stock cases and complete custom designs represent the most diverse options for the optimal protection of your products.
Zero Manufacturing is the leading source for customizable commercial, industrial, and military cases. Offering over 100,000 pre-tooled sizes of deep drawn enclosures of virtually unlimited sizes and configurations, Zero's varied aluminum products can be customized and modified with processes such as drilling, laser cutting, riveting, welding, brazing and so much more. Custom accessories are also available for many of Zero's products to meet your individual requirements, contact us for more information.
|
|
MADE-TO-MEASURE TELESCOPIC COVERS
7000 types of protective covers already available
All models of covers, all brands of machines
Horizontal, vertical, rail, double axis protection…
Measurements carried out on machine or on model
Made-to-measure telescopic cover supplied in 4 weeks
12-month guarantee
RECONDITIONING SERVICE :
Our teams take over your current worn or even damaged cover and we guarantee complete reconditioning within 3 DAYS.
40 to 60% less expensive than purchasing a new cover Water-tightness,
Guiding, sizing, finishing…
Technical improvement of original cover Complete reconditioning in less than 1 week Minimum guarantee 6 months.
|
|
Realization to measure of frames and cartérisations of machines starting from the sections aluminum. By combination of basic elements, of connection on the ground and fixings of panels, it is possible to create the protections in conformity with the safety regulations standards or adapted to the specifications of the users.
Possibility of carrying out doors beating, sliding, or guillotines with electric safety or not.
Delivery in kit or assembly.
|
|
| ... products without technical information |
| |
|
|
|
|
The Modec standard box van is constructed using built aluminium framed GRP side panels, a one piece GRP oulded roof and fully integrated aluminium base frame and floor. This includes hinged near and offside entry doors, a stainless steel rear frame with a wide latch-lokable shutter, plus grab handles on each rear pillar.
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
|
|
|
|
Modec is a revolutionary zero emission commercial vehicule. Economically and envoronmentally viable, the vehicule is purpose built from the ground up.
The modec is perfect for the demanding urban environment. With a 5,5 tonne GVW, this silent truck is capable of travelling at a swift 50mph over, a range of up to 100 miles or 60 miles.
The Modec Chassis Cab has been designed with the built in strength and flexibility that makes it suitable for a wide range of applications and conversions
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
JBX Series
Logo service available. (Minimum order quantity: 5 boxes) • Single handle 3-point locking mechanism (JBX-series) • Handle Dust Cover • Fully recyclable PE • May be incorporated in the side guard according to EC Directive 89/297.
JBC40
Used as a general storage box or housing for control instruments on a commercial vehicle • Supplied with a compartment lock and two keys • JBC40T is supplied with a latchlock that can be locked with a padlock.
JBH67 JBL67
Safety lock with 2 keys • Wide range of colours • Detachable or hinged lid • Fully recyclable UV-stabilized PE • Mounting Kit Available (KIT53).
JBC100
Storage box for commercial vehicles • Designed primarily as a housing for a sieve • Drop down opening • Two locks.
|
|
MEGA Multitruck Van, diesel or electric, perfect in urban and rural zones as well as in closed sites
With its 3m3 capacity the Mega Van is the ideal partner for your transport solutions in urban and rural zones as well as in closed sites.
Available in combustion engine or electric versions the MEGA Van represents a very economical choice in terms of initial investment and running costs.
ergonomically designed, the MEGA Van has a very spacious cab, a low loading height (approx. 38cm) that make light work of all loading and unloading operations.
Highly manouevrable the Mega Van is ideal for going in and out of city centres and for parking
|
|
MEGA Multitruck Chassis Cab, with advantageous body build dimensions!
The choice is yours. Front wheel drive, aluminium chassis, with advantageous body build
dimensions, you have at your disposal the best tools to build your MEGA Multitruck.
Whether it be on a Chassis base or a Pick up you are able to create your own build according
to your transport needs. You can decide between a combustion engine or an electric motor
depending on the environment and your travel plans. In the Pick up version the loading volume can be as much as 3m3.
The MEGA Chassis Cab or Pick up: your imagination has no limits
|
|
| ... products without technical information |
| |
APL 4000 L; automatic label print & apply system especially designed for labelling secondary packaging at average linear speed.
It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
APL 4000 B; especially designed for labelling secondary packaging without contact.
The labelling is done by air blow and ejecting the label. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
APL 4000 R; it is designed to apply labels at the front or the back side of packaging.
The system integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPC global specifications.
|
|
APL 4000 D; system for the identification and double labelling of secondary packaging.
It also offers the possibility to apply and print two adjacent labels on the upper part and/or the side, vertically as well as horizontally. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
|
|
|
|
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System.
|
|
|
|
|
|
Sirius Tamper Evident
Design specifically to apply tamper evident labels to a wide range of cartons. Widely used in the pharmaceutical industry for touch labelling and is fuly validated to those standards. It can incorporate security systems of your choice.
Features
- Motion control system provides increased labelling accuracy coupled with absolute speed matching to cope with variable speed demands of today’s packaging lines
- Enhanced control system incorporating single touch screen user interface provides a very high level of user diagnostics. The unique software enables quick set-up times between product changeover and is self- monitoring to provide optimum reliability. This reduces the skill level required for operation and maintenance
- Fully integrated inspection systems to identify label and/or overprint presence; barcode readability is available and easily incorporated. Also available is the integration of a vision system capable of identifying label position on the product plus the correct lot/expiration data
- Modularised transmission system utilising the latest technology ensures that the Sirius provides the optimum level of flexibility and reliability for all current and future labelling requirements
- Increased cabinet space allows for greater flexibility for future upgrades
|
|
|
|
see the results for the following category : 
