|
|
Tigon Spring Balancer Improves Work Safety & Efficiency.
Capacities ranging from 0,5-70kg.
We also offer Hose Reel Balancer Series and Retractor Series. |
|
- Retractors -
Conductix-Wampfler retractors are designed in such a way that retraction force increases smoothly as the cable is extended. As a result, the attached tool is returned to its starting position by the retractor after use, leaving the workbench free for other tools or equipment. An assurance of precision work is provided by the progressive increase in spring force.
- Balancers -
Conductix-Wampfler balancers can be identified by their conical cable drum, which ensures that the retraction force remains virtually ‘constant’, throughout the full cable travel. As a result, the position is retained after the attached tool has been used. In addition, no noteworthy increase in retraction force occurs when delicate operations are being performed.
- Cable reels -
Conductix-Wampfler Cable reels are mostly used for the supply to electromechanically driven tools in workshops, commerce and industry. The cables are no longer lying around on the floor, the safety level in the company is enhanced, and the operational life of the cables is also increased. In our program you can find cable reels from 2 x 1 mm², with 7 meters take-up length, through 8 x 1.5mm² and 30 meters take-up length, up to reels that are suitable for grounding tank wagons, with 1x16mm² and 15 meters take-up length. |
|
Main features :
- Increase Productivity
- Reduce Operator Fatigue
- Extend Tool Life
- Increase Safety
- Organize Workstation
- Used for pneumatic tools.
- Integrate hose reel and sSpring Balancer to organize workstation
and improve efficiency. |
|
The COL range provides weightless suspension for loads from 0.7 to 55 kg. COL 1 has a 2 mm polyester rope and COL 2, 3, 4 have 2.5 mm stranded steel wire. Every COL balancer is equipped with an automatic braking system. The braking system makes it possible to completely connect or disconnect the spring force to or from the load.
|
|
Main features :
- Increase Productivity
- Reduce Operator Fatigue
- Extend Tool Life
- Increase Safety
- Organize Workstation
- Spiral design.
- Increasing screw diameter is balanced by increasing spring
force so that the output force is balanced and the tool stops
at wherever it is pulled. |
|
Make tools light as air
Balancers :
- Eliminate strain and fatigue
- Increase productivity
- Streamline work stations
- Applications : assembly lines, packaging units
Cable tool balancers:
- Adjust easily to any tool size and weight
- Secure fastenings
- Rugged aluminium construction
- Long-lasting stainless steel cable
- Various safety systems
|
|
| The Spiroflex “adjustable spring balance” offers varying load capacity for many counterbalancing applications. Used extensively for window counterbalancing and window replacement in both wood and plastic, suitable for upward rising and full drop windows, louvre sashes, service hatches and self closing doors. The unique design offers a stainless steel spring which operates smoothly and silently to give a perfect action.Das Spiroflex "verstellbare Gegengewicht" bietet unterschiedliche Belastungskapazitäten für zahlreiche Gegengewichtsanwendungen. Es findet ausgiebig bei Fenstergegengewichten und bei der Fenstererneuerung in Holz und Kunststoff Anwendung und eignet sich für hochfahrende und völlig versenkbare Fenster, Rolladen, Durchreichen und selbstschließende Türen. Die einzigartige Bauweise weist eine Edelstahlfeder auf, die eine reibungslose und geräuschlose Betätigung erbringt. |
|
With cylindrical drum: progressive traction, one balances the load or the tool, one positions his height with the choice, one draws on the load or on the tool to carry out the slackened work, once load or the tool, they return to their initial position.
With conical drum: constant traction on all the race, the load or the tool remain in balance with the desired position.
With pawl: allows to block the rope lathe by lathe or with the wanted position, to free to draw downwards.
Without pawl: the load is balanced or the tool with the position desired, after use the load or the tool takes again its initial position. |
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support |
|
RACO's spring brake actuator systems work completely electromechanically so that it can be used in all rail vehicles, cableway railways and escalators, etc. Their main feature is safe and jerk-free braking. The spring brake actuator system always ensures that the vehicle is braked even if the electrical equipment fails or if there is a power failure.
The explosion-proof design is also used for braking pit locomotives in underground mining.
Benefits:
small dimensions and lightweight
easy to install and connect
soft and jerk-free braking
does not ice up or freeze at low temperatures
no problems with leaky lines
no noise pollution
no media disposal and especially enviroment-friendly
low operating and service costs |
|
| ... products without technical information |
| |
... see all the products in the category
Clutches
|
Spring-clamp feed-through terminal blocks, polyamide insulating body, UL94V-0 flame behaviour.
To be mounted onto TH35 - 7.5; TH35 ? 15 type rail, according to IEC 60715.
Double possibility to insert the multi-pole ?easy bridge? system PTC type jumpers.
Available for (Ex)i ?intrinsic safety? circuits
(RAL 5015 blue colour).
|
|
Differents kinds and possibles uses:
- 1-in 1-Out
- Multiple Connection
- Grounding
- Panel Mount
- Angular feed through
- Anguler Earthing
- Double Level |
|
The Shock absorbers - Activators ORIA consist of a flexible part of Neoprene reinforced with nylon weaves with covers in each one of the ends resistant to oxide, with orifices for entrance of the air and subjection to the machines in which they settle.
The Shock absorbers - Activators ORIA can be used like vibration-proof elements and pneumatic cylinders.
The Shock absorbers - Activators ORIA isolate until a 99% of the disturbing vibrations, avoiding the injurious effects of these in: machineries, structures of buildings and reduction of the noise.
The Shock absorbers - Activators ORIA have been conceived to replace the cylinders of air or hydraulic engineers. Due to its design, the pressure of the air in the outside of the piece exerts an axial force that produces a race of elevation, pushes, tightened, revolving motions or fast movements of fixation.
Advantages: - In relation to the pneumatic cylinders:
- Cost of acquisition inferior.
- Saving in maintenance (It lacks movable parts of air seals, do not exist frictions).
- It does not require lubricant.
- Saving of space. |
|
| The tandem model spring-mechanical transfer bridge is used to bridge over great differences in height (i.e. when the vehicle is significantly higher than the existing ramp). It consists of a transfer bridge with spring equalisation and a transfer bridge divided in the middle without spring equalisation. It is used depending upon the application by tilting part 1 of the transfer bridge onto the ramp and tilting part 2 onto the vehicle. In the resting position, the tandem transfer bridge is automatically secured. |
|
| ... products without technical information |
| |
| Spring-loaded clamps provide constant band tension on hose applications that expand or contract due to temperature and pressure changes. Solid bands prevent hose extrusions. |
|
CNC technology
CNC grinding machines manufactured in vertical design and suitable for grinding both sides of compression spring ends. Thanks to the CNC technology, the grinding discs are compensated fully automatic after the truing process. This increases the production rate and guarantees maximum production accuracy. Mainly sintered corundum grinding discs are used. |
|
Versatile spring loaded units which are pre-loaded to support from 23 to 2036 kgs.
Integral moulded Nylon seal and zinc plated housing for corrosion resistance. Available in different forms, with or without additional fixing flange. Load at maximum deflection from 32 to 2036 kgs. |
|
At the very latest when, because of a power failure (intentional or not) or a malfunction something has to be done to safeguard man and machine, hydraulic clamp Ratio-Clamp® - the clamping device from Hänchen - is just what you need.
Boasting a retention force of up to 450 kN, the hydraulic clamp holds the piston rod in whatever position it is in at that particular moment. Without having to rustle up some extra power (no extra energy) and for an unlimited period of time. The clamping device Ratio-Clamp® is approved by the German Technical Inspection Agency (TÜV). Nor does the development of specific solutions (larger rod diameters, intermediate sizes, greater clamping forces…) pose a problem to the Hänchen specialists.
The possibilities for your application:
Rod-Ø from 10 - 140 mm,
clamping forces from
1 - 450 kN. Other
dimensions on request.
Other products of the range of services:
- Hydraulic cylinders
- Test cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts/assembly utilities/accessories |
|
|
... see all the products in the category
| |
