|
|
ZIP 30
Manual band sawing machine for solid and metal profiles.
Also steel, stainless steel, brass, aluminium, copper.
Robust, versatile and handy, for artisan metal works and professional duty.
One way miter cutting (from 0° to 60°)
Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability.
Precision blade-guide with hard metal pads, bearinga and anti-corrosion treatment.
Two cutting speeds.
Vice with quick lock lever.
|
|
WAL-ZER 1 AND WAL-ZER 2
Portable bandsaws, very easy to carry, offer a wide cyìutting range to suit your application (steel, aluminium, brass, teflon, PVC etc.)
Ideal for the electrician, blacksmith, thinker, plumber, ect.
Fast sawing speeds and economical cost-per-cut.
|
|
Manual bandsawing machines, designed to cut sections and solids materials from 45° right up to 60° left.
|
|
Type SC 178VSHE
Motor 1HP
Voltage 1x230V
Blade speeds 21/23/44/58 m./min.
Sawing rounds 0° - 178mm
45° - 305mm
Sawing squares0° - 178x305mm
45° - 115x180mm
Saw blade 2362x19,05x0,8
Swivel 45°
Weight 150kgs
|
|
PH 101
Small portable bandsawing machine for hobbyists and fitters to cut at 0° up to 45° left.
Model is realized completely in aluminium die casting and is available single-phase.
A FEW FEATURES:
- Brush motor 1500 W with electronic speed variator.
- Transmission is given by double coupling of casehardened steel gears with helical teeth.
- Head swivels and is locked by means of a screw for mitre cutting.
- Control handle with microswitch and safety switch to start or stop blade motion.
- Adjustable front band guide so as to position it according to the dimensions of the material which is being cut.
- Bi-metal band.
- Adjustable stop to make cuts of the same length.
- Instructions manual for maintenance and spare parts list.
|
|
Structure
- Heavy-duty hydraulic cylinder with precision ground hinge
support
- Cast iron quick set up vise
- Pan shaped base with built-in coolant & hydraulic system
Blade Drive
- 2 hp motor, heavy-duty reducer, & variable step drive assembly
- 4-speed transmission with the best worm gear and shaft
Blade Guidance & Lubrication System
- Carbide blade guides with roller bearings
- Two addtional bearings to support blade from the top
- Integral coolant system
- Blade brush
Control & Automation
- Down feed rate & cutting pressure control via hydraulic
down feed valve
- Simplified control switches mounted on saw head
Material Feeding & Clamping
- Cast iron vises
- Secure clamping via dependable manual lead screw system
- Anti-slip hand wheel
Safety
- Conduits protection measure
- Orange alert safety design
Standard Accessories
- Easy blade change with front access at waist level
- Bi-metal saw blade
- Tool box, leveling pads, and an additional wire brush
- Operation & parts manual
|
|
| ... products without technical information |
| |
|
M. K. Morse manufactures all types of band saw blades from carbon to carbided tipped. The premium high performance Independence line of bimetal band saw blades is tougher and more wear-resistanct than M42. The Achiever line features an enhanced blade design incorporating higher fatigue resistance and more tooth toughness when cutting. The new M-Factor By Morse is a carbide tipped blade designed for aluminum foundry cutting and other abrasive cutting applications.
|
|
Master Cobalt® Bi-Metal
Use on machinable metals, including stainless steel, pipe, tubing and solids. Premium variable pitch blades offer high heat, wear and shock resistance. Variable pitch allows a broader range of applications and reduced vibration when cutting. This combination results in the longest blade life among competitive blades.
Carbon Steel
Use on easy to machine metals. These economical blades are straight pitch.
Standard Bi-Metal
Use on machinable metals, including stainless steel, pipe, tubing and solids. Premium straight pitch blades offer high resistance to heat, wear and shock contributing to longer blade life.
Stationary Band Saw Blades
Use for cutting wood and easy to machine metals. Carbon hard edge/flex back blades offer reliable performance.
|
|
A revolutionary bi-metal blade that can last 20% longer than competitive blades in high-production applications.
This is our premium high performance bi-metal band saw blade. Independence™ is tougher and more wear-resistant than M42. Everything about it is special. Special high speed steel tooth edges provide superior wear, heat and shock resistance. Special tooth geometry with positive rake. A special alloy backer provides the most fatigue resistance in the industry. It was designed from the beginning to free users from the downtime associated with frequent blade changes. We wanted to create a blade that gives you a sense of independence while cutting your production costs. This is it.
Versatility means fewer blade changes.
Independence™ blades can do it all. They cut easily through hard-to-machine metals. They cut all shapes, sizes and types of machinable metals and are your best choice when cutting bundles. Independence™ blades improve the flexibility of your manufacturing process while helping you control costs.
|
|
Manufactured from a precision high carbon steel strip with unique characteristics and metallurgical proporties developed exclusively for Dakin-Flathers.
The steel enables blades to be produced with superior cutting performance, improved fatigue resistance and tougher, harder teeth. The fine dispersion of carbide produced during heat treatment dramatically improves wear resistance and blades life. These factors combine to result in the highest quality blades available.
Available in an extensive range of width, thickness, tooth pitch configurations and set patterns. Widths range from 1.6mm to 50mm, tpi from 1.1 to 32 and thicknesses from 0.36mm to 1.1mm.
Can be used for cutting wood, plastics, abrasive materials, non-ferrous metals and most other soft materials.
|
|
A lower cost solution for cutting low alloy and non – ferrous metals. Flexback is ideal for cutting aluminium, brass, bronze, copper and other soft metals. Available in widths from 1.6mm to 50mm.
Hardback has a stiffer backing material with added beam strength which promotes straighter cutting and resists swaging and scoring of the band. Available in widths from 6mm to 32mm.
Friction bandsaw is manufactured from a high silicon alloy used in high speed friction cutting applications to cut ferrous and difficult to cut materials under 25mm. Available in widths from 20mm to 25mm.
|
|
Dakin-Flathers manufactures the widest range of hobby bandsaw in the world, in 0.36, 0.45, 0.5 and 0.65mm thicknesses. Ideal for applications where a thinner gauge is required such as hobby applications, DIY use and smaller machines with tighter wheel radii. Available in widths from 3mm to 25mm with a wide variety of tooth pitch configurations.
Hobby blades are available in a variety of different packaging options, including fully customised packaging and bar coding to any specifications.
|
|
Constructed from a high speed steel strip electron beam welded to a high strength spring steel alloy backing material. Teeth are milled into the HSS strip resulting in a long life, fatigue resistant blade with HSS tooth tips. The resistance to heat, abrasion and vibration allows faster cutting rates over a wide range of materials. Both Matrix and M42 grades are available in constant tooth pitches and vari-tooth pitches. Constant pitch is used in applications where the cross sectional size of the material is consistent. Vari-pitch is used for a wider range of cross sectional sizes and reduces noise and vibration.
Matrix (M31) blades are ideal for general purpose cutting and contour cutting of tubing, structurals and solids, especially in fabrication applications or where the material is prone to vibration. Available in widths from 20mm to 34mm.
M42 blades are used for faster or higher volume production cutting of solid sections and exotic or tool steels. Available in widths from 6mm to 54mm.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The SUPER SILENT 1250 S band-knife machine creates optimal cutting results without operator fatigue
The SUPER SILENT 1250 S runs absolutely vibration free and delivers very good cutting quality. Adjustable band-knife speed by frequency control allows optimal adaption of the band knife speed to the materials and ply height being cut , while operating at a very low noise level.
The quality and quantity of cutting with a band-knife machine depends directly upon the operator stress level.
The SUPER SILENT 1250 S band-knife machine provides optimal and ergonomic working conditions for operators and thus allows maximum production output.
Here are some of its highlights:
- Vibration free
- Silent operation through optimal noise reduction
- Outstanding cutting performance through constant knife sharpness by precision
sharpening device
- Excellent cutting quality
- Highest reliability
- Easy handling of heavy ply stacks through air cushion table
|
|
|
|
