|
|
CTR 650 M
Offering value for money, Against CTR 650 and CTR 650 S, there is manual feed into the cut and return. Compared to the competition in the category of manual band saws, it is the only one that has motorised blade height setting from the central control panel. The setting is single speed with an option of electronic measuring with the LG 100. All this significantly accelerates, facilitates, and makes more accurate the height setting of the saw blade.
|
|
|
The CM 370 M is a completely manual machine, particularly sturdy, recommended for the cutting of massive, flat bars and profiles of medium dimensions with the possibility to cut up to 60° right (RGT) with manual angle setting.
|
|
|
|
|
|
Manuel Mitre Cutting Horizontal Bandsawing Machine BMS 280 G
The 320G and 320Gl are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Powered by a 2 HP motor via five step pulley speed system and a totally enclosed reduction gearbox.These models can cope with most types of material.Blade guides with rollers and carbide pads provide precise support for the blade. Thermal overload and no-volt release are standart feature and the machines automatically switch off at the end of the cut. On semi automatic models, after finishing the cut, sawframe is lifted hydraulically up to the adjusted level. Bi-Metal sawblade and 1,2 meter infeed roller table are supplied as standart
|
|
SAR 440 SA GDS
Heavy duty bandsawing machines ideal for large cutting section. Higher stability and precision.
Powerful mechanical variator delivering a wide range of cutting speed. Controlled sawframe downfeed with hydraulik regulator. Hydraulic sawframe uplift. Quick approach vice and replaceable working support plate.
Precision blade-guides with hard metal pads and adjustable bearings.
|
|
KM10 10" abrasive mitre saw
Angles for 0 to 45 degrees - left or right.
Positive index holes - up and down stops.
Two cam-lock vises - lever-lock for table.
Spindle speed 3450 rpm, 5/8" arbor
Capacities: 1 1/2" solids, 2 1/2" shapes @ 45 degrees.
Dimensions: L 25" x W 24" x H 17"
1 PH or 3 PH (Specify)
220 lbs.
Options:
WS10 workstop
12M steel stand
Model:
KM10-1 1 phase/220 volt
KM10-3 3 phase 220/440 volt
Other products available :
|
|
HSM14 14" semi-auto Aluminum saw
14" high speed mitre saw for cutting ALUMINUM and other non-ferrous material with steel blade.
5HP, 3ph, 3450rpm motor.
4400 spindle speed. 1" spindle arbor
Power down feed. Air over oil 0-12 FPM. Semi-automatic
Double v-belt drive. Cast iron contruction!
Double air vises, OSHA safety blade guard.
Mitres left and right to 45deg.
Vise opens to 6"
Capacities: 4-1/2" pipe and square.
Dimensions: 30"L x 48"W x 60"H MADE IN USA !!
750 lbs.
Model: HSM-14 5 hp, 3 ph, 220/440 volt ( specify voltage)
|
|
Manual bandsawing machines, designed to cut sections and solids materials from 45° right up to 60° left.
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range.
|
|
|
Mitre saw which combine robustness, assured by the cast-iron structure, and accuracy. Rotary table and self-centring locking devices for the main angles, manual locking for the other angles with reading on graduated scale. Possibility to incline the ...
|
|
305mm(12") Slide Compound Saw for USA and Canada
- Powerful 15 amps (full-load current) motor and aggressive tool design
- Compact body thanks to the new sliding system: Operable even in tight places because the depth of the main unit is 930mm(36-5/8")
- Display panel that indicates miter / bevel angles (only C12LSH)
- Laser guide system for easier alignment with the ink line (only C12LSH and C12RCH models
- Bevel and Miter angle fine adjustment
- Positive angle stoppers for easy adjustment of the turn table position for miter cutting (At the right and left of 0°, 15°, 22.5°, 31.6°, and 45° setting)
- Conveniently positioned bevel angle locking mechanism
- 120mm(4-11/16") high sub fence supports the workpiece widely for stable cutting
- High dust collecting performance
- Splinter /Dust guide to prevent chips from scattering
- Soft and Vibration-reducing grip
- Spindle Lock for easy blade replacement
|
|
PH 101
Small portable bandsawing machine for hobbyists and fitters to cut at 0° up to 45° left.
Model is realized completely in aluminium die casting and is available single-phase.
A FEW FEATURES:
- Brush motor 1500 W with electronic speed variator.
- Transmission is given by double coupling of casehardened steel gears with helical teeth.
- Head swivels and is locked by means of a screw for mitre cutting.
- Control handle with microswitch and safety switch to start or stop blade motion.
- Adjustable front band guide so as to position it according to the dimensions of the material which is being cut.
- Bi-metal band.
- Adjustable stop to make cuts of the same length.
- Instructions manual for maintenance and spare parts list.
|
|
Model: PS 305 DG
• Powerful 1800 watt motor delivers 4400 rpm
• Large cutting capacities include a massive maximum crosscut of 343 mm x 111 mm at 90º
• Double bevel 0 - 47º left or right
• Mitres 60º left or right, perfect for awkward mitres
• Rugged cast construction with huge table area
• Cam operated mitre lock for fast angle adjustment
|
|
UK 290
The first mobile professional saw with the functions and advantages of a crosscut and mitre saw, a flush-mounted circular saw and a table saw
Three machines in one – mitre saw, flush-mounted logging saw and table saw
Can be expanded into a system circular saw
Mobile due to low weight
Motor with overload protection and soft start technology
High quality, swivelling universal guide adjustable on all sides of the machine table for mitre and parallel cutting
Infinitely swivel and height adjustable saw blade
Integrated, foldable stand with level adjustment for safety
Precise workpiece support made of aluminium profiles
Side part made of solid steel sheet
For single phase alternating current
|
|
KGS 303 Plus
For all cutting tasks, ideal for interiors
For cutting wood, coated panels and plastics
Simple cutting of all angular, bevel and rafter cuts
Powerful, maintenance-free universal motor
Turntable with precise angle adjustment
Die-cast aluminium work bench
Suitable for right-handed and left-handed operators
Cutting width increased to 300 mm
Saw head can be tilted by up to 48° on both sides
Multi-supported draw gear
High guide profiles that can be moved at the side, for the improved fixing of the workpiece
Standard-equipped with a flange laser
Integrated cutting depth control
Transport lock
Extensive range of accessories
|
|
Machines
Band cutting off machines
Manual machines
Capacity 90° mm : 220
Angle cutting : Right 45°/Left 45°
- Drive in Kw : 0,5 / 0,7 - Cooling pump power in Kw : 0,12 - Blade dimensions in mm : 2450 x 27 x 0,9 - Cutting speed in mm/mn : 40/80 - Working height in mm : 950 - Overall dimensions in mm : 1000 x 1300 x 1900 - Uses : Manual band cutting-off machine perfectly suited to sawing work in locksmith's, general engineering and maintenance workshops, it allows straight and mitre cutting of solid materials and profiled sections until 45° right and left. - Standard equipment : Pneumatic vice, blade tension control by electric sensor, roller on both sides of the frame. - Optional features : Variable speed unit, pneumatic vice, down feed brake, mist cooling, infeed and outfeed roller blade.
|
|
|
Abrasive cut-off saws, 7" -30" diameter blades, dry cut and Wet cut available, special design machines also available. Please contact factory for pricing.
|
|
The Lynx LCS14 Cut-Off Saw is used for fast cutting of concrete, masonry, pipe, structural steel beams ang guardrail. Lynx LCS14 features are:
- 7-9 gpm (26-34 lpm) operating range.
- 14 inch abrasive or diamond segment (wet or dry) blades.
- Available in clockwise or counter clockwise rotation models.
- Internal flow control to prevent over-speeding.
- Internal blade brake.
- HTMA quick disconnect couplers included on all models.
- Adjustable blade guard.
- Optional Saw cart.
|
|
355mm(14")High Speed Cut-Off Machine
- Powerful Hitachi's motor (2,000W / 230V)
- Soft Grip D-Handle for easy operation
- Quick-Locking vise for fast clamping
- Vise (B) adjusts 45° right and left, and the maximum opening can be set in two steps 205mm(8-5/64") and 240mm(9-7/16") for a wide varity of materials
- Trigger switch with lock-off button and Spark Chute (diversion guard) for operators safety
- Spindle Lock for easy wheel replacements
- Double insulation
|
|
Manual sawing machines using an HSS circular blade to cut metal solids and sections up to 120 mm diameter from 45° SX to 45°DX
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range.
|
|
Model: SMT 355
• Powerful 2300 watt motor
• 0º-45º mitre capacity with quick release mitre clamp
• Spindle lock for easy wheel and accessory changing
• Defl ector protects the user from sparks
• Oversize guard for added safety
• On board wrench storage
• Rubber feet for greater stability
• Replaceable carbon brushes
|
|
The C300 Series cut-off machines originate from the technological development of the C250 Series. In addition to the basic features which are common to both Series, the two C300 models can accomodate cutting wheels up to 300mm diameter, and have a more powerful and sophisticated motor, controlled by a frequency inverter. The main function of the frequency inverter is to electronically control the motor power variations during the sample cutting process, improving the performances. Moreover, the inverter acts as a motor brake in case of power failure (caused, for example, by the safety switch that immediately interrupts the power supply in case the cover is open while the machine is working), allowing the complete stop of the motor in a shorter time than a machine not equipped with the inverter.
The difference between the two models of the C300 Series is the variable speed device, which is available only on the C300VS cut-off machine.
|
|
Motor power (w) 750 (1PH)
Speed (tr/mn) 52
Diameter (mm) 225
Jaw opening (mm) 80
Length x Depth x Height 540x380x430
Weight 34
Angle capacité coupe 0° 45°
Capacité coupe ronde (mm) 65 60
Capacité coupe carrée (mm) 55x55 50x50
Capacité coupe rectangle (mm) 45x70 40x60
Socle compatible (dimensions) SNT320 (370x370x800)
Disque compatible (diamètre/alésage) DC225 (225 mm/32 mm)
|
|
2300 Watt Metal Chop Saw CS 23-355
For single phase alternating current
Especially suitable for the fast, precise cutting of steel, non-ferrous metals, iron and cast profile
Motor and gear with ball bearing and designed for high loads
Spindle lock for easy disc change
Quick clamping device with variable mitre conversion up to 45° on both sides
Easy to transport due to built-in handle and locking device
Swivelling blade guard
Adjustable spark guide plate
Bottom access guard
Adjustable depth guide
|
|
Circular cutting-off machines
Milling machines
Capacity 90° mm : 80
Angle cutting : Right 45°/Left 45°
Overall dimensions in mm : 860 x 710 x 1760 - Uses : Manual circular cutting-off machine perfectly suited to sawing work in locksmith's, general engineering and maintenance workshops, it allows straight and mitre cutting of solid materials and profiled sections until 45° right and left. - Standard equipment : Double vice clamping, adjustable jaws, self setting vice, storage box.
|
|
| ... products without technical information |
| |
|
|
