- Hydraulics - Pneumatics >
- Pump >
- Manual hydraulic pump
Manual hydraulic pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Pressure: 0 MPa - 100 MPa
Weight: 3.5 kg
Hydraulic pump 100 MPa (14 500 psi) The 729124 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 54E) and for mounting and dismounting bearings ...
SKF Maintenance,Lubrication and Power Transmission
Pressure: 0 MPa - 100 MPa
Weight: 13 kg
Hydraulic pump 100 MPa (14 500 psi) with large oil container The TMJL 100 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 92E) and for mounting ...
SKF Maintenance,Lubrication and Power Transmission
Pressure: 0 MPa - 150 MPa
Weight: 11.4 kg
Hydraulic pump 150 MPa (21 750 psi) The 728619 E is a two-stage pump suitable for use with SKF Supergrip bolts and for the mounting and dismounting of bearings or components where ...
SKF Maintenance,Lubrication and Power Transmission
Pressure: 2,500 psi - 40,000 psi
Weight: 4.5 kg - 61 kg
... aluminum pump base offers an unrivalled combination of strength, weight, and resistance to corrosion. Lightweight single-speed hydraulic hand pumps offer the simplicity ...
ENERPAC
Flow rate: 30 l/min
Weight: 5.2 kg
... known as drum pumps) are portable manual pumps designed to safely transfer fluids from barrels, drums or storage tanks. These types of manual hand ...
Pressure: 0 bar - 500 bar
... variety of control options: direct manual, servo-assisted manual, remote hydraulic, remote hydraulic with feedback, On-Off electric in closed centre ...
Pressure: 16 bar - 4,000 bar
Weight: 8 kg
Very high pressure hydraulic hand pumps 1600 bar – 3000 bar and 4000 bar. • Manual pumps for very high pressures, light, compact ...
FPT Fluid Power Technology
Pressure: 700 bar
Weight: 5, 9 kg
... most used version and a 3 liters tank in the bigger version. High pressure hydraulic hand pumps - Single speed - 700 bar - 10000 psi High pressure hydraulic hand ...
FPT Fluid Power Technology
Pressure: 700, 25 bar
Weight: 5.5 kg - 22.5 kg
... a 4 – 8 and 9 liters tank in the bigger version. High pressure hydraulic hand pumps - Two speed - 700 bar - 10000 psi 700 bar hydraulic hand pumps. ...
FPT Fluid Power Technology
Pressure: 30, 700 bar
Weight: 4.9, 5.3, 6.1, 9.1, 10 kg
... filling port and visual oil level. Options • Pressure gauge • Other relief valve setting, on request : HP and LP • Pump support • Pressure limitation block
QUIRI
Pressure: 30, 700 bar
Weight: 6.1, 6.4, 7.3, 10.2, 12.1 kg
... filling port and visual oil level. Options • Pressure gauge • Other relief valve setting, on request : HP and LP • Pump support • Pressure limitation block
QUIRI
Pressure: 700 bar
Flow rate: 0.2 l/min - 1.2 l/min
Air hydraulic pumps, working pressure 700 bar, using a pressure multiplicator. Recommanded solution to replace hand pumps. For single and double acting cylinders •Hydraulic ...
QUIRI
Pressure: 520 bar
Weight: 13 kg
Advantages of hand pumps • Sturdy construction, yet lightweight and easy to handle. • Pressure limiting valve provides safety against overloading. • Optimally compatible with our hydraulic ...
Our hydraulic cylinder with a quick coupling has a performance up to 11 tons pressure – with a deadweight of only 2,5 kg. The SKP-1 is compatible with the ALFRA foot pump. Your advantage: Your hands are ...
Pressure: 700 bar
Weight: 5.6, 10.5, 15.2 kg
... construction. Hi-Force HP manually operated pumps have a proven track record industry wide and offer excellent value for money in portable hydraulic power. A full range ...
Hi-Force Hydraulic Tools
Pressure: 30 bar - 520 bar
Weight: 13.6 lb
• Standard with 2 x 2 m hoses with quick-release fasteners • Options: pressure gauge, shut-off valve, and longer hoses
Pressure: 30 bar
Weight: 4.5 lb
Features of the manual hydraulic pump PV-K • Standard with 2 x 2 m hoses with quick-release fasteners • Options: pressure gauge, shut-off valve, and longer hoses
Pressure: 50 bar - 700 bar
Lightweight two-speed hand-pump. Low hand force required at max. operating pressure. Pump housing from malleable cast iron, oil reservoir from aluminium. With pressure relief valve, factory ...
Pressure: 20 bar - 700 bar
Flow rate: 0.1, 0.7 l/min
Weight: 5 kg
Practical and functional, the BDP700-1L hydraulic pump is powered by a lithium battery with a slide connection, which guarantees maximum efficiency and a long life The BDP Series hydraulic ...
BELL S.R.L.
Pressure: 1,000, 500, 700, 250, 350 bar
Flow rate: 0.1 l/min - 0.8 l/min
Weight: 5.3 kg
Like all the pumps of the HP Series, it is suitable for any hydraulic application which require very high hydraulic output pressures and a moderate and controllable oil flow, to ensure ...
BELL S.R.L.
Pressure: 250, 400, 500, 700, 100 bar
Flow rate: 0.14 l/min - 2.6 l/min
Weight: 6.8 kg
The UPF air-hydraulic pump of the UP Series is a single-acting pump with a three-position foot pedal and a max working pressure of 1000bar The UPF air-hydraulic foot ...
BELL S.R.L.
Pressure: 500 bar
Weight: 2.9 kg
... single-acting hand pumps are also available in the following sizes: - 12 cm³ - 25 cm³ - 45 cm³ We also supply double-acting hand pumps, see sizes below: - 6 cm³ - ...
Taon Hydraulik Komponenter ApS
Pressure: 380 bar
Weight: 2.9 kg
... single-acting hand pumps are also available in the following sizes: - 6 cm³ - 25 cm³ - 45 cm³ We also supply double-acting hand pumps, see sizes below: - 6 cm³ - ...
Taon Hydraulik Komponenter ApS
Pressure: 500 bar
Weight: 3.4 kg
... The double-acting hand pumps are also available in the following sizes: - 12 cm³ - 25 cm³ - 45 cm³ We also stock single-acting hand pumps, see sizes below: - ...
Taon Hydraulik Komponenter ApS
Hydraulic pump P39 ✔ Crimping and rounding with 60 to 200 kN compression heads. ✔ Length: 400 mm. ✔ Weight: 4.900 kg. ✔ Fitted with a 1.8 m hydraulic hose. Please state type of ...
Hydraulic pump SPM4095 ✔ Crimping and rounding with 60 to 400 kN compression heads. ✔ Length: 700 mm. ✔ Weight: 12.900 kg. ✔ Fitted with a 3 m hydraulic hose. Please state type ...
Hydraulic pump PA133 ✔ Crimping and rounding with 60 to 200 kN compression heads. ✔ Length: 400 mm. ✔ Weight: 4.900 kg. ✔ Triple distributors maintaining pressure when air supply is interrupted. ...
Pressure: 200 bar
Weight: 3.5 kg
Double acting hand pump system If a double acting hand pump/cylinder system is required a NRV 4/3 directional valve can be connected to the HPA-D-LH hand pump with ...
SSH Stainless
Pressure: 200 bar
Weight: 3.5 kg
The HPA-K-LH hand pump is designed for installation to an external reservoir connected by the 1/4"BSP on the hand pump. The Hand pump is equipped with built-in check ...
SSH Stainless
The HPAN is designed as an emergency hand pump for hydraulic systems. The hand pump is equipped with a built-in check valve. Please notice, there is no built-in relief valve
SSH Stainless
Pressure: 20 bar - 700 bar
Weight: 6 kg - 20 kg
W series pumps are for use with Single acting cylinders. X series pumps are fitted with 4-way 3 position valves for use with Double acting cylinders. The pump range includes single ...
Pressure: 35 bar - 1,600 bar
Weight: 18 kg
P22-M-3 HAND PUMP Double-stage high pressure hand pump with integral three-way directional control valve for supplying single-acting cylinders. A compact, portable, low-cost device equipped with 2,5 ...
Pressure: 700, 500 bar
Weight: 7.7 kg - 15.4 kg
The LUKAS ZPH hand pumps are particularly robust and user-friendly two-stage pumps. They are particularly ergonomic due to their compact design and are intuitive to use. ...
LUKAS Hydraulik GmbH
Pressure: 500, 700 bar
Weight: 4, 5.2, 6.2, 10.8 kg
The hand pumps of the LUKAS LH series have been doing their job reliably and enduringly for years. They are maintenance-free and move loads in one go thanks to automatic switching between high and low ...
LUKAS Hydraulik GmbH
Pressure: 500, 700 bar
Flow rate: 1.1, 0.15 l/min
Weight: 6.3, 8.8 kg
The air-hydraulic pumps of LUKAS work fast, automatically and can be operated by the user with his foot. This leaves your hands free and allows you to actively support your project. The easy operation ...
LUKAS Hydraulik GmbH
Pressure: 59 bar
Precision-matched cylinder and pump set for wide range of applications. Four styles of cylinders within the CPS/RPS Series with each set featuring single or two-speed hydraulic hand pumps. ...
Pressure: 325 psi - 21,750 psi
The Power Team P-Series hand pumps come in a variety of configurations to meet the requirements of your application. Along with various oil capacities and flow rates, you can choose from the following ...
Pressure: 4 psi - 120 psi
Ideal for powering single-acting cylinders and portable hydraulic tools, the Power Team PA9 series pumps are easier to operate than a hand pump, designed ...
Pressure: 700 bar - 720 bar
Hand or foot pumps – Nominal pressure: 700 bars. Overload valve operating pressure: 720 bars. Dual-stage (two-speed) pumps fitted in their standard versions with a coupler complying ...
Hand Pump, 18 cu.in. single speed Designed to be used in many different fields with a vast selection of hydraulic components. Industrial quality, general purpose hand ...
Zinko Hydraulic Jack
Hand pump, 40 cu.in. single speed Designed to be used in many different fields with a vast selection of hydraulic components. Features: Works with a wide variety of rams including ...
Zinko Hydraulic Jack
Hand Pump, 150 cu. in. Two speed Designed to be used in many different fields with a vast selection of hydraulic components. Features: Works with a wide variety of rams including ...
Zinko Hydraulic Jack
Pressure: 2,850 psi
Model # : P20 Name : Hand Pump Order # : P20 Max. Pressure : 2850 psi 1st Stage Flow : 0.82 cu. in. / min. 2nd Stage Flow : 0.16 cu. in. / min. Usable Oil Capacity : 20 cu. in. Weight : 10 lbs. ...
SIMPLEX
Pressure: 10,000 psi
P22 - Hand Pump Model # : P22 Name : Hand Pump Order # : P22 Max. Pressure : 10000 psi Volume Per Stroke : 0.06 cu. in. Usable Oil Capacity : 20 cu. in. Weight : 10 lbs. Description ...
SIMPLEX
Pressure: 10,000 psi
P41 - Hand Pump Model # : P41 Name : Hand Pump Order # : 34174 Max. Pressure : 10000 psi Volume Per Stroke : 0.16 cu. in. Usable Oil Capacity : 45 cu. in. Weight : 18 lbs. Description ...
SIMPLEX
Pressure: 500, 400 bar
Speed: 2,900 rpm - 4,500 rpm
Power: 95 kW - 273 kW
... conditions. Highlight 500 bar pressure technology, i.e. extremely solid pumps for the toughest applications and conditions Wide range of controllers from manual MS, to electric proportional ...
Pressure: 0 Pa - 700 Pa
Two-speed hydraulic pump, Ideal for use with remote cutting and crimping tools Compact and lightweight - easy to move around jobsites Solid base with wide legs provides for good stability ...
GREENLEE
Pressure: 3,000, 2,500 bar
Flow rate: 3 us gal/min - 108 us gal/min
... D Type pumps are legendary. Known for their robust, long life spans, these hydraulic variable-displacement pumps can take on pressures up to 3500 PSI. These systems provide unmatched ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining