Manual presses

Force: 4,000 kN

... adjustable and electronically monitored Hydraulic overload protection Motorized ram adjustment Press safety control with modern SIMATIC TOUCH PANEL Press safety valve HERION Safety cam control Central ...

Force: 25 tf - 60 tf
Stroke: 30 mm
Hydraulic pump power: 3.7 kW - 7.5 kW

... operation function is integrated with the liquid crystal display, and the fault content of the base is automatically displayed. ▶ Manual mold height adjustment with mold height indicator and hydraulic clamping device. ▶ ...

Force: 60 kN

The portable piercing units of the ULBG 601 series are characterized by their high pressing force of 60 kN combined with a very lightweight handling. The ergonomic handle guide of this drive unit completes its appearance Due ...

Force: 100 kN - 600 kN
Opening: 150, 140, 160, 200 mm

Rotary or standard table trimming presses for shearing in manual- or automatic- the forged pieces, with capacities from 100 kN to 600 kN. The E/* series was designed to work together with a vision system and an anthropomorphic ...

The Champion range of machines is completely hand operated (little and medium sizes) and can produce up to 400 shells per hour depending on diameter and depth. Higher capacities can be met with semi automatic machines ...

Force: 630 kN - 10,000 kN

© With a three-beam and four-column structure, this type of press is designed economically and practically. ©The hydraulic System adopts advanced cartridge inserted valve integrated System which has large flow, low pollution, ...

Force: 30 tf

... green Product Type manual Weight 250 Kilograms (kg) Nominal Force 30ton Power Source Hydraulic Condition New Supply Ability : 300 Set Per Month Product Description Rubber Vulcanizer ...

Force: 0 tf - 6 tf

A manually operated machine suited to marking, numbering, identifying, crimpig, rivetting, punching, and other applications Specifications : • Weight : 11kg. • Shank: Ø 8x30mm . • Hourly output : about 1,250 impacts. • ...

Table length: 1,100 mm - 1,300 mm
Max. pressure: 0 bar - 1 bar
Overall length: 3,300 mm

The BUGA Duo 2612 is the smartest duo oven and membrane press in its class. The oven and the vacuum press are mounted on the same chassis to optimize the space in your workshop and optimize its use. The ...

Suited to self-cutting eyes in foil and tarpaulins. Application / form: selbstschneidende Ösen

Hydraulic Manual Die Clicker Press 1.Application of hydraulic clicker press This hydraulic manual die clicker press used for die cutting foam, ...

Force: 10 kN

Specimen Cutting Press for preparation of test specimens of rubber and plastic materials. Description EP 08 is a small and compact manual press for preparation of test specimens ...

Manual Hollow die punch AMSE offers a full range of hollow die punch to obtain specimens of various shapes from samples of films, sheets of polymeric material and other materials by means of dies made of steel as prescribed ...

Force: 1.9, 3.9, 4.9 kN
Opening: 40 mm - 280 mm

The CR-Type manual Presses are particularly flexible, indicated for all assembly works where operator force is sufficient. The column structures with adjustable height allow the best way of use. On request of the ...

Force: 0 kN

Manual Press machines which open corner joint slots on the corners of aluminum profiles manually. • Opens corner joint holes on the aluminum profiles • Opens corners up to 1.5 mm of thickness • ...

Force: 0 kN

Manual Press machines which open corner joint slots on the corners of aluminum profiles manually. • Opens corner joint holes on the aluminum profiles • Opens corners up to 1.5 mm of thickness • ...

Force: 0 kN

Manual Press machines which open corner joint slots on the corners of aluminum profiles manually. • Opens corner joint holes on the aluminum profiles • Opens corners up to 1.5 mm of thickness • Practical ...

Opening: 22 mm

Adjustable power from 0 to 100 Kg and usable stroke of 22 mm • Benchtop press with two buttons security system • Pneumatic actuation of the rack through a souble effect piston • Maximum light 175mm • Maximum sensitività ...

Force: 20, 2 kN
Stroke: 120 mm
Working speed: 11 mm/s

Hong Jin Desktop High-Precision Manual Heat Press Four-Column Heating Press Hot press, mainly used for wood-based panels, decorative panels, aluminum honeycomb, glass, ...

Force: 53,936 N
Table width: 312 mm
Table length: 322 mm

... the cross-piece. Press head wheel is pressed clockwise. Using the press, it is possible to process cardan shafts and other products with parameters different from those presented above, if this does not ...

Stroke: 15 mm
Weight: 10 kg

The MANUAL CRIMPING PRESS GM49 crimping press has been designed to crimp insulation displacement connectors (IDC) on flat cable. Besides, any crimping on loose terminals is possible, ...

Max. pressure: 6 bar - 8 bar
Weight: 240 kg
Overall length: 2,200 mm

... custom-made molds The DIE CASTING MOLDING PRESS SYSTEM GM MELT 2T has an aluminum profile structure complete with 4 liter melter, 2 high viscosity gun and 2 high temperature pipes with pneumatically or manually operated ...

FP 39/MT 130 MANUAL LEVER PRESSES FOR THE APPLICATION OF SAIL-TYPE EYELETS The presses are ideal for applying "sail" type eyelets on interior curtains, banners and tarpaulins. If you want to apply VELA type eyelets ...

The wadding roll press is the perfect solution to reduce the diameter of the wadding rolls. Feeding of the rolls can be automatic or manual. No adjustments are required for different roll length or ...

Force: 25 tf
Stroke: 6 in
Weight: 240 lb

The Power Team C-Frame Press is available with a 25T capacity. The Open throat design makes loading and unloading work easy. Other features of the C-Frame Press include: • Can be bench mounted or on ...

Force: 10 tf
Stroke: 10 in
Weight: 91 lb - 192 lb

... Team 10T H-Frame Press is ideal for small pressing jobs, repairing small motor armatures, removing and installing gears, bearings and other press-fit parts. Other features of the C-Frame Press ...

Force: 147.1 kN
Weight: 76 kg
Overall length: 166 mm

High stability Durable & sturdy Precision Easy control Stable Comfort Features 2 holes in each foot to fix in the floorSteel frame2 step stroke system -> Closed: Full stroke for quick approach. Open: Small stroke for fine tuning of ...

Weight: 200 kg

Protective polycarbonate grille to shield the operator Specifications: - hydraulic pump - manual override or hydropneumatic pedal - chrome piston with adjusting screw - sliding cylinder jack with handle and ...