|
|
The console-controlled range of MultiTest-x test frames display load, displacement and speed. Simple test programs can be created and stored.
The MultiTest-x has been designed specifically to meet the requirement for ease of routine use in QC laboratories, or production environments which are often not ideal areas for using a PC.
|
|
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test stand.
The TWIST, a 1 to 12 NM torsion test stand with combined Torque/Angle measurement provides this function.
The torsion meter enables torsion tests to be made on various samples such as springs, or metal or plastic parts.
It is made up of a horizontal, rigid test stand, with two rails to provide precision guidance.
Its calculating power enables it to record values coming from 2 different sensors simultaneously, monitor the set points and make a calculation for each channel.
On its display, it shows a Torque/Angle graph curve.
It provides the simplest, most versatile system for dealing with the most wide-ranging torsion tests in the workshop or in the laboratory.
|
|
|
|
|
|
Mecmesin offer a range of sophisticated Computer-controlled Test Frames. The Multi-test-i is available in a range of capacities to accommodate all your testing requirements, from the entry level MultiTest 1-i through to the advanced twin column test frames that have been specifically designed to test large or high load samples or products.
Intelligent loadcells mounted to the test frame allow the MultiTest-i to download data directly to a PC via the serial port at a rate of 2000 times a second. If your test requirements change then the MultiTest-i can easily be upgraded with a different load cell that meet your new testing requirements.
Emperor, Mecmesin’s powerful yet user-friendly control software, provides both a simple platform for routine analyses on the factory floor, as well as an advanced platform for sophisticated laboratory test routines. Programmable functions include running a test to a pre-determined force/torque, displacement, time or to break, as well as graphical interrogation of results.
Applications
The MultiTest-i range of motorised test stands can be used for many different applications including:-
Compressive testing
Deformation testing
Extension testing
Materials testing
Medical device testing
Packaging testing
Spring testing
Tensile testing
Textile testing
Top-load testing
Mecmesin offer a wide range of standard grips and fixtures, to hold your specimen. Alternatively, a custom-built fixture can be designed for your specific application.
|
|
The TEX 555 test stand is ideal for low and medium force testing when a quick result is required. This manual test stand makes accurate and repetitive tensile and compression tests for springs, crimps, foam, peel and crush applications. The TEX 555 test stand features a revolving hand crank, small footprint, durable design and portable.
Combined with our Centor force gauges, the manual test stand TEX 555 can measure up to 2500N in production or laboratory for an affordable price. It’s available in vertical or horizontal orientations with table or wall mounting fixtures. Travel limits, digital ruler and auto-return spring are available in options.
|
|
Technical Highlights:
- Push- & Pull Capacity: 30,000 N
- Robust Quality and Easy-to-use operating philosopie
- Maximum speed up to 600 mm/min
- Maximum travel distance up to 500 mm
- Safety shutdown by limit switches
|
|
|
The Vortex is a twin-column motorised torque testing machine. Speed is set with a rotary potentiomer controller. Either speed or total rotation is indicated on an LCD display. Torque is measured by a `smart` static torque transducer and displayed on an AFTI.
|
|
Ear Measuring Instrument, Model 126
Used to obtain a numerical value of the size of the ears resulting from anisotropy in the material of cylindrical deep-drawn cups (e. g. according to DIN 50 155). The average cup height, the height of the ears in percent and in mm can be read-off at a touch of a button and are shown on the digital display instrument. To enable additional data processing the test instrument can be equipped with interfaces, such as BCD or RS 232 C outputs and with a printer.
|
|
|
For precise repeatable and reproducible measurements, test stand is necessary in order to keep same test condition. It also negates the need for heavy manual labor when applying large forces, and makes the task of obtaining measuremnets more efficient.
|
|
|
The Crane Joint Rate Simulator (JRS Opta) is used for assembly tool performance testing. This is achieved by accurate and repetitive simulation of the joint without the use of a threaded fastener. The JRS can be configured across a range of joints from hard (20 degrees) to soft (720 degrees). Once the tool has finished its test cycle, the JRS Opta automatically releases the brake ready for the next test cycle. This has the advantage of speeding up the tool test procedure because there are no fixings to undo and no joint kits to back off and re-grease between test cycles
|
|
| ... products without technical information |
| |
|
High quality analogue instruments designed to measure an extensive range of electrical and electronic parameters. This comprehensive range offers DIN instruments, ANSI switchboard meters, panel indicators, sealed and ruggedised instruments, and complementary selector switches for line to line and line to neutral readings. Instruments are precision engineered and robust in design, ensuring accurate measurement and display in the most demanding of environments. All instruments are available in a range of styles, sizes and specifications to meet the exacting needs of industry.
|
|
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
E Probe now under development process
* Non contacting E field Measuring,
* Directional sensitivity
* Power supplies +/-12V
* Measuring range 1 milliVm-1 up to over 1000Vm-1
* Bandwidth : 10 mHz - 100 kHz
* White noise: μVm-1/√Hz experimentally shown
|
|
|
|
|
|
For over 35 years, LDS Nicolet has provided state-of-the-art data acquisition solutions for the test and measurement community. Today, we are the world's premier provider of out-of-the-box, ready to use systems for a diversity of physical and electrical applications. The Genesis system builds on a reputation of high performance acquisition and signal conditioning by providing a flexible, cost effective platform to meet all data acquisition and transient acquisition needs. With the Genesis, LDS Nicolet introduces the future of data acquisition.
Based on the concept of a mainframe with plug-in modules, the Genesis offers a wealth of capabilities. Up to 128 channels can be installed within a rack mainframe (56 channels in the portable tower mainframe), and multiple mainframes can be combined to an even larger system. Up to 400 MegaSample memory per board allows for high definition transient capture. Built-in data transfer acceleration gives you an overview of MegaSamples of data within seconds. With the world's best performance signal conditioning and 16-bit accuracy, Genesis is the right solution for your difficult measurement task.
Genesis Features
Combines Transient Recorder and Streaming Data Acquisition Capabilities
Programmable High-Performance Signal Conditioning
Sample Rates from
200 kS/s to 100 MS/s per Channel
Transient RAM to 400 MS per card, 12.8 GB per System Max.
Tower Mainframe with 7 slots or Rack Version with 16 slots (see lower picture)
Master Slave Option for Synchronized Acquisition on up to 1080 Channels
Unlimited Recording Size and Duration
IRIG and GPS Time Code Options
Local SCSI Drive Storage for Safety Critical Applications
|
|
Portable PD Analyzing System LDS-6/UHF
for PD measurements and monitoring on GIS or Cable Systems
The LDS-6/UHF is a state-of- the-art, portable digital measuring system for the UHF processing of partial discharges acquired from installed GIS sensors, or UHF sensors. It combines the features of a PD detector and spectrum analyzer.
PD quality tests on GIS using installed GIS sensors
PD testing on HV Apparatus, using UHF technology
Designed for on-site PD diagnosis tests as well as for manufacturing and research
Single channel or Dual channel
Available in 19" housing with external PC connected via Ethernet, or portable case with built in mini PC
|
|
Digital Partial Discharge Measuring and Diagnostics System for industrial and general HV test floor environments.
The LDS-6 is a highly sophisticated digital measuring system for the PD detection according to the standard IEC 60270, VDE 0434 as well as various IEEE and other standards for the High Voltage Test and Measurement Technology. It meets also ICEA T-24-380 standard for Cable Industry.
PD quality tests on high voltage equipment
PD diagnosis on developing insulating materials
Designed for on-site PD diagnosis tests as well as for manufacturing and research
PD fault location for power cables
|
|
| ... products without technical information |
| |
|
|
|
|
|
VM20 is a modular, multipurpose measuring and test system for grinding machines easily programmable by the user. Available as independent unit or for rack-mounting, equipped with local hardware or remote operator panel as well as with Windows Software panel, digital I/O logic interfaces, Profibus and RS232. The wide range of grinding wheels balancing devices, with or without embedded acoustic sensors, applicable on single or multiple grinding wheels or long grinding wheels, allow to automatically and rapidly reduce vibrations which generally cause errors and imperfections on worked surfaces. The wide range of AE transducers configuration available, with assembly both on rotating and stationary machine components, can be used to monitor the machine conditions, through FFT analysis, and to determine the grinding wheel position when it contacts the piece to be worked or the tool-dresser. During working, diameter and roundness gauges, as well as the pieces positioning gauges, allow to achieve a constant production quality together with a cycle time improvement, thanks to correct feeding speeds for roughing-out and finishing.
|
|
The CoMo Injection process monitoring system Type 2869A allows zero-defect injection molding production by analyzing the cavity pressure curve.
A bright 12.1" color touch screen monitor Type 5629A3 makes operation of the CoMo Injection system even quicker and easier, and accelerates communication with the system. The new IP Setup Program now being supplied with the system allows simple automatic detection and configuration of CoMo Injection units installed in production.
Version 2.0 of CoMo-MIS Type 2829A…, the database system for storing measured and calculated process data, is now also available in the four languages mentioned above.
All of the CoMo Injection and CoMo-MIS systems that have already been installed can be updated with the latest version. The IP Setup Program works with all CoMo Injection units equipped with Version 1.2.
|
|
The panel-mounted measuring and control stations DULCOTROL® are online measuring and control units which are available in a variety of designs and optimised depending on the individual application for the three most important applications in water treatment:
Drinking water / Food & Beverage
Cooling water
Waste water
|
|
Model SC104V:
- Three independent channels allow full control of three devices
- Modular design permits addition or removal of channels
- Soft limits always visible on display
- Variable speed control through front panel or GPIB interface
- Rack mount option
- Fiber optic interface; ST connectors
- Full manual control from front panel
- 115 or 230 volts AC
- System diagnostics
- Six channels for remote switching of auxiliary equipment
- Compatible with industry standard automation software
- User friendly
- Expanded command set: SPEED, TARGET, SCAN, AUX
- LCD display
- Independent jog keys
- GPIB TARGET command
- Self-test
- Fully IEEE488.2 compatible
|
|
|
|
|
|
TOPAX NT is a wall-mounted controller and measuring amplifier which has been developed on the basis of the latest microprocessor technology. It can be used for the most different tasks in swimming pool applications, water treatment and process engineering. With its versatile possibilities a solution is offered which stands out for its user-friendliness, interfaces and modularity.
Besides the classic water parameters such as free chlorine, pH value, temperature or REDOX potential it is also possible to measure and further process combined chlorine with the TOPAX NT. Furthermore the combined chlorine content is displayed.
Due to a graphics display the menu-driven operation uses plain text available in different languages. Trend values can be shown as curves on the display. With the help of this curves the user can set the parameters directly.
As an option the TOPAX NT can also carry out the functions of a gas warning device. The chlorine gas sensor can be connected directly.
Digital inputs at the TOPAX NT allow the user to monitor the metering performance of the pumps connected or to control filter flushing continuously, for example.
|
|
|
|
|
|
● CMGZ 600 Series
The CMGZ 600 Series controller integrates many functions into one compact housing. It offers selectable control of unwind brake or drive, intermediate drive, or winding drive. The CMGZ 600 Series controller is available in a 2 channel version offering 2 independent closed loops for tension control of 2 tension zones in any configuration.
● Functional description
The CMGZ 600 Series controller offers a large dual line LCD display, plain text selectable in multiple languages, and only 4 programming keys makes this a very easy to set-up and operate control unit. Tension reference values and all
parameters and functions can be set with keys or remotely via PC or BUS interface. Digital signal filtering, automatic offset calculation, built in
taper tension option and automatic startup ramping function along with all other features creates a very powerful and user-friendly tension control system.
The CMGZ 600 Series controller operates on a 2 millisecond cycle time for fast reaction performance and if utilised, the built-in line speed signal overlay capability improves the overall control dynamics even more. In addition, a built in pilot control program which adapts the control parameters dynamically based on the actual roll diameter, and both +/-10V and a 0/4-20mA outputs provides the flexibility that makes the FMS CMGZ 600 Series the leading tension controller in the industry.
|
|
21Plus! TM Measurement and Control Platform
The newest release of 21Plus! TM, is the very latest technology
offered to the continuous web gauging market. This is the
latest, significantly enhanced release of EGS’ widely installed
21Plus! TM Measurement and Control platform. It takes all the
proven features of 21Plus! TM and enhances them to include
improved operating features and data security features, while
maintaining the safety and security of proven operational
experience.
|
|
|
|
see the results for the following category : 
