|
|
Unrivalled performances …
AG-X : You door to the future..
Experience unsurpassed reliability and operability with the new Shimadzu Autograph AG-X. This revolutionary new model delivers high-level controlled measurement performance utilizing a combination of patented technology from earlier models and world-class innovations.
Development of this series focused on intuitive operation and convenient support functions, resulting in standard equipment that includes both a color TFT touch panel screen for PC-free operation and the very popular Smart Controller operation featured on many of our earlier testing machines.
The TRAPEZIUM X software has also been newly developed, using cutting-edge Microsoft .NET technology to enhance user-friendliness. Shimadzu's new AG-X series advances testing in three areas performance, operability and support.
Don´t miss your chance to find out more about our Universal Testing Machines, Hardness Tester and Capillar Rheometer
|
|
Model: YAW4305, YAW4605, YAW4106, YAW4206, YAW4306
Capacity: 300kN, 600kN, 1000kN, 2000kN, 3000kN
Features:
This testing machine is mainly used to test compression strength of cement, concrete and rocks. Meanwhile they can perform shear test, anti-break test, and Elastic Modules test of concrete with special compression fixtures and measurement assembly.
YAW series' systems are guaranteed to meet ISO 15579-2000, ISO679, ISO 7438-1985 and other international and national specifications. With advanced, precise, full digital and graphic displaying instruments, it can be used to determine compression-resistance strength of building materials such as bricks, stones, concretes, cements and so on. When equipped with corresponding grips and measuring devices, it can perform break-resistance test, split test of concretes, as well can be used to carry out compression and punch break test of metals.
|
|
The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner, and offers unrivalled repeatability and reproducibility. Considerable cost savings are possible through accurate prediction of corrugated component performance.
APPLICATIONS
Paperboard, Paper, Liner, Medium, Paper/Film/Foil, Laminations
SPECIFICATIONS
* Load cell range: 0-500N
* Clamp length: 1.2 in (30 mm)
* Free span: 0.03 in (0.70 mm)
* Adjustable clamping force
* Load cell capacity: 100 lb (444 N) with overload
protection
* Conforms to TAPPI T-826, ISO 9895, SCAN P46,
AS/NZ 1301.4SO RP, BS 7325, DIN 54518
FEATURES
* Unique clamping mechanism
* Test statistics at the push of a button
* Selectable units kN/m, lb/inch, N
* Load cell with overload protection
* Easy to read display
* Traceable calibration
* RS232 serial data output
|
|
FEATURES
- Load Capacity 1000 LB (4448 N)
- Platen size 7 x 7 in (178 x 178 mm)
- Test speed 0.2- 20 in/min (5.08-508 mm/min)
- Return speed 4 in/min (± 101 mm/min)
- Color LCD Display
- Menu-driven software
- Test results and statistics are displayed on a large high contrast color LCD screen
- Preset keys for all relevant tests
- Automatic fast return platen saves testing time
- Multi-language programmed- 7 languages
- 8 Corrugated Test Methods for quick access
- Measuring units include: N, N/m², lb, lb/in², kg, or kg/m²
- RS232C serial data output
- Built-in Printer
|
|
|
|
|
|
The Programmable Force Tester is a highly configurable motorized test stand for tension and compression testing applications up to 1.5kN (300 lb). The stand can be controlled from the front panel or via a computer and is fully compatible with Nexygen™ TCD software. The Programmable Force Tester is engineered on a unique modular platform, allowing for “build-your-own” configurability. Features can be ordered individually at time of order or activated in the field. Integrated travel indication, overload protection, and a host of programmable parameters makes the tester quite sophisticated, while its intuitive menu structure allows for quick, simple setup and operation. A password can be programmed to prevent unauthorized changes. With a rugged and modular design, the Programmable Force Tester is a compelling solution for applications in laboratory and production environments.
Standard Features
- LCD display with UP, DOWN, STOP, and emergency stop buttons and soft keys
- Selectable speed units of measurement (mm/min & in/min)
- Password protection of test parameters, to prevent unauthorized changes
- Integrated travel limit switches
- Removable fixture mounting plate with matrix of threaded holes
- Stepper motor-driven, produces 0% speed variation with load
- Mounting holes for bench mounting
- Unique mechanical design significantly reduces column bending
|
|
Model: SHT5205P; SHT5305P; SHT5506P; SHT5605P; SHT5106P; SHT5206P
Capacity: 200kN; 300kN; 500kN; 600kN; 1000kN; 2000kN
Features:
SHT5000P series are based on SANS SHT5000 series servo hydraulic testing system and improved with side action grips.
This series adopts international advanced side action grip technology and solve the problem of load dropping during large force test and high frequency batch test. Gripping force is auto controlled and stable for tensile test of high strength, high hardness materials, stranded wire, and other hard-to-clamp specimens.
Dual side action allows synchronous clamping specimens and ensures precise center alignment. This deign can also eliminate lateral force on specimens before test which is common in wedge action grips.
|
|
|
The ADMET eXpert 26xx series twin ballscrew universal testers are designed for users who want the power of a full-size system and the versatility to test materials, components and structures. Offered as bench top testers with capacities to 50KN , the eXpert 26xx series machines tackle the toughest tests with their superior axial alignment, stiffness and crosshead guidance. The ADMET floor standing models feature wide column spacings to accommodate larger grips and fixtures, temperature chambers, special test fixtures and full-size parts.
|
|
Tensile testing is the most widely used method for indicating the serviceability of many papers. Tensile Energy Absorption (T.E.A.) indicates the durability of papers which are subjected to repetitive straining and stressing. The Horizontal Tensile Tester offers menu driven pre-selection of parameters and infra-red sample detection for quick, effortless testing.
FEATURES
- Test statistics generated at the push of a button
- Load cell protected
- Auto return after test complete
- RS232 serial data output
- Wet test option
- Serial Printer output
- Multi-language standard
- Menu driven pre-selection of parameters and infra-red sample detection
- Two pre-set test types are machine direction and cross direction
- Optional software can add hand sheet tensile test
|
|
Model: SHT4305W, SHT4605W, SHT4106W
Capacity: 300kN, 600kN, 1000kN
Features:
1. Dual test space provides compression in lower space and tensile test in upper space.
2. Half-open hydraulic grips is easy to place specimens and has high rigidity.
3. Lower crosshead is driven by worm wheel with high stability.
4. Spoke shape load cell is connected with piston, which ensures high precision measurement.
|
|
|
|
|
|
Model: CMT5504; CMT5105; CMT5205; CMT5305; CMT5505; CMT5605
Capacity: 50kN; 100kN; 200kN; 300kN; 500kN; 600kN
Features:
These rugged electromechanical UTMs feature SANS strain gage load cell force measuring systems. Choice of single working space or dual working space load frame and maximum frame capacities from 50N to 600kN. Options for the Electomatic machines include extra length screws and columns for extraordinary sized samples.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application. SANS professional testing software and proprietary control system ultimate come true closed loop testing and control of load, extension and displacement.
Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. Extending function: Equipped with multi-load cells to meet the further requirement of customers
6. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
7. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5%% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution:
|
|
|
|
|
|
The Lab Master Release and Adhesion testing system operates with Windows® Based Software, and features: The ability to create user-defined test set-up, individual test speed selection, user-definable default areas for analysis, exporting graphs or data to Microsoft Excel and SPC programs, and enhanced Calibration - verifies existing and new calibration, and keeps a calibration log for ISO record keeping. Test data visually represents the characteristics of the peel.
APPLICATIONS
Tape, Pressure-sensitive labels, Release Paper, Blister Packs, Closures, Medical Products, Seals, Security Labels
SPECIFICATIONS
* Standard range of 0–11,339 g (0–25 lb)
* Other Load Cells Available
* Tests samples up to 5 cm (2 in.) wide with maximum peeling length of 30.48 cm (12 in.)
* Variable speeds from 30.48 to 4064 cm and 12 to 1600 in.
STANDARDS
Meets TLMI L-IA1 and L-IA2, PSTC-1, 3, and 4, and FINAT FTM 1, 2, 3,& 4
FEATURES
* Analysis of raw data collected from pull for immediate feedback of test results
* Intuitive user-friendly controls
* Accurate field calibration with built-in ISO 9000 compliance record-keeping with on-screen user definable “calibration due” alerting
* PC Network compatibility for output of other lab management systems
* Test Materials at 90°, 135°, and 180° angles of peel
* Piezoelectric sensing system
|
|
Good things come in small packages!
We are proud to introduce our NEW model 84-76 Tensile Tester. The instrument has a small footprint just over 90 square cm (14 square inches). Our model 84-76 provides a large 5.7 inch color display, intuitive opera¬tor interface, software control, integrated printer & serial port for data collection.
The new unit is designed to test strength of sheet mate¬rials including Paper, Board, Tissue Paper, Film Packaging Seals, Adhesives, Pressure Sensitive Tapes and a variety of low force tensile applications up to 1330 N (136 Kg, 300 lbs).
The Model 84-76 Tensile Tester is a robust, precision, tensile strength instrument suitable for rugged produc¬tion environments yet designed to provide highly accu¬rate measurements for research applications.
|
|
Dynamic Mechanical Tester
DForce is a low force mechanical testing system capable of performing static and dynamic tests to 15 Hz in tension or compression. Typical uses include determining the force-deflection properties and fatigue life of biomaterials, composites, medical devices, packaging, products and more. DForce actuators are linear motors that come in three frame sizes providing continuous forces from 20N to 275N and peak forces from 90N to 1850N. Actuator strokes range from 25mm to 300mm. An internal dry bearing provides clean quiet, maintenance free performance.
|
|
|
|
|
|
bottle or jar opening tester : ANDITORK EA
The ANDITORK EA bottle or jar opening tester is specially designed to measure opening torques for bottles and jars.
Opening tester with ring securized cap : ANDITORK ST
If the cap has a security ring, the test can be carried out using the ANDITORK ST
Tester for small bottles : MICROTORK
The MICROTORK is specially designed for small bottles, and it is equipped with a small grip plate whose fingers can be used to hold small containers.
Available in Easy and Star versions.
Anditork Security : ANDITORK DL
The ANDITORK DL product is designed to measure opening torques with downward force.This procedure is used to check safety caps.
motorized opening torque measuring instrument : DRIVETORK
The DRIVETORK motorized opening torque measuring instrument is just the right equipment for production teams that have to carry out a lot of opening tests and want to eliminate the variability linked to operators.
Torsion test stand : TWIST
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test
stand.
The TWIST, a 1 to 12 NM torsion test stand
with combined Torque/Angle measurement provides this function.
Torque wrench calibrator : CENTOR Meter W
The CENTOR Meter W torque wrench calibrator enables verification of torque wrenches thanks to a series of reference sensors ranging from 22 to 222 NM.
torque screwdriver calibrator : CENTOR Meter H
A set of low-capacity reference torque sensors enables use of the CENTOR Meter H torque screwdriver calibrator to verify torque screwdrivers from 1 Nm to 6 Nm.
|
|
|
|
|
|
Model: CMT4102; CMT4202; CMT2502; CMT4102; CMT4103; CMT4203; CMT4503
CMT4104; CMT4204; CMT4304
Capacity: 100N; 200N; 500N; 1kN; 2KN; 5KN; 10KN; 20KN ; 30KN
Features:
These rugged electromechanical UTMs feature SANS strain gage load cell force measuring systems. Choice of single working space or dual working space load frame and maximum frame capacities from 100Nto 30kN.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
SANS professional testing software and proprietary control system ultimate come true closed loop testing and control of load, extension and displacement.
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution: Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. Extending function: Equipped with multi-load cells to meet the further requirement of customers
6. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
7. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC
|
|
|
|
|
|
DMA 242 C - Dynamic mechanical Analyzer
The versatility of the DMA 242 C is particularly clear from the variety of sample holders. Depending on the type and consistency of your sample, you can investigate the visco-elastic properties accurately over a wide modulus range.
A stainless steel container facilitates measurements in various media (immersion tests). With the use of a thermostat, it is also possible to carry out reliable extended time tests at higher temperatures.
The DMA 242 C operates in the broad temperature range of -170 to 600°C. The low-temperature range is achieved with the proven, low-consumption CC 200 L liquid nitrogen cooling system. The minimal temperature gradient over a sample length of up to 60 mm in the bending mode is unique.
An intelligent purge gas system provides for a defined sample atmosphere and protects the measurement electronics from any gases evolving from the sample as well.
Frequencies from 0.01 to 100 Hz can be selected and combined with defined stress of up to 16 N and deformation amplitudes of between 0.1 and 240 µm.
The digital filtering via Fourier analysis yields an excellent signal-to-noise ratio, which means that even the smallest tanä values can be resolved. Comprehensive, multi-dimensional calibration of the DMA system guarantees reproducible test results for the stiffness and damping (visco-elastic) behavior of your sample.
|
|
|
The eXpert 560x series is a bold new approach to low force testing at an affordable price. The rigid frame, top acting detachable actuator, detachable electronics and several motor/drive combinations allow for a variety of machine configurations. The actuator and electronics can also be sealed from moisture and airborne particles so that it can operate maintenance free in the harshest of environments. The eXpert 560x performs tension, compression and bend tests from less than 1 lb to 1,400 lb. Some models are capable of speeds in excess of 5,000 mm/min and can be used in high speed dynamic testing.
|
|
|
Compression testing can be carried out on Lloyd Instruments extensive range of materials testing machines from 1kN-300kN. Ideal for routine quality control testing or complex multi-stage tests. Our 'Plus' Series machines are flexible and simple to use, providing high accuracy load measurement and are capable of a rapid 8 kHz data acquisition rate. The stand alone system can store up to 600 test results from 10 programmable test set-ups or, with PC integration with Lloyd Instruments powerful NEXYGENPlus material test and data analysis software, can perform advanced data analysis.
|
|
|
|
|
|
The Chatillon® TCD225 Series is an advanced force testing system optimized for production, quality control and engineering applications.
The TCD System consists of a powerful, yet easy-to-use console; a rugged frame with high performance, closed-loop motion control; and an intelligent load sensing system with measuring accuracies better than 0.1% full scale. The TCD console features a high resolution color graphical display featuring menus, function and numeric keys and status indicators that assist the user in setup, operation and analysis. Information may be displayed in large-format tabular and graphical formats for easy viewing.
The frame operates from 0.001 to 50.0-inches per minute (0.01 to 1270 mm/minute) and employs an advanced closed-loop PID controller for precision travel (accuracy better than 0.25% unloaded), ideal for applications such as spring testing where exact distance control is required. The TCD System permits the user to measure heights based on a datum or absolute position. Deflection compensation is standard. Standard test setups for load limits, distance limits, time limits, break tests, rupture tests, cycling and loop tests are included.
No Computers. No Software. No Compromises.
|
|
|
The eXpert 760x line of compact table-top universal mini-testers is designed for users who want the flexibility of a full-size system without the high cost or space requirements. From 1KN up to 10KN capacity, the ADMET single column bench top models provide the flexibility to test biomaterials, wire, textiles, packaging, elastomers, plastics, films, foils and other materials with confidence. Compact in design, some units fit within a 16 x 12-inch space while others use just 17 x 20-inches of bench top space.
|
|
|
This system is used mainly for performance of tensile tests on metals as per DIN EN 10002-1. The modular system consists of the materials testing machine (e.g. Zwick Z050) and an automatic specimen feeding system in portal design with a triple-axis robot arm. Add-ons such as the cross-section measurement unit, roughness measurement unit, coating thickness measurement unit as well as a hardness tester complete the system. The specimen magazine can hold up to 400 specimens.
|
|
|
|
|
|
The 600 kN Hydraulic Testing System with Single Side-Acting Hydraulic Grips is completly customizable, the grips are ideal for tensile testing of stranded wire or cable and uniquely feature longer jaw faces to better accommodate gripping. These longer jaw faces are extremely important for tensile testing, as strands can easily slip from conventional grips, ultimately affecting the integrity of the test and test results.
Cost-effectively designed with multiple testing system configurations including tension, compression, bend, shear and flexure, Instron’s KN Series Universal Hydraulic Testing Systems allow for a flexible single test space. The versatility of design also enables the user to easily add test stroke or increase the test opening and the testing space is easily accessible due to upper actuator design.
For increased operator and equipment safety, Instron’s KN Series ensures that the actuator does not travel past the limits of its design. Superior accuracy is provided by Instron’s load cell system and zeroing capability. The variable pressure power pack provides pressure on demand, reducing heat generation for increased oil life, decreasing maintenance and eliminating the need for water cooling.
|
|
Servo-Hydraulic Testing Machines
The ExPress line of machines are a bold new approach to servo-hydraulic machines for static testing. Manufactured to exacting standards, these machines are accurate, tough and cost less than conventional hydraulic testing machines. ExPress frames employ strain gage load cells for direct measurement of force. No need to compensate for piston friction and other non-linearities, these frames offer exceptional accuracy and precision while reducing long-term calibration and service costs.
ExPress frames feature a simple design based upon off-the-shelf components for lower cost, faster delivery and long-term availability. Our conservative design is based upon continuous testing to maximum load for years of maintenance free operation. The hydraulic power supply and electronics are integral with the frame thereby saving valuable lab space.
|
|
Single Column Testing Machines 1-5 kN (225-1124 lbf)
Lloyd Instruments offers a range of affordable single column test machines for a wide variety to test applications up to 5 kN (1124 lbf).
All machines are capable of tensile, compression, flexural, peel, shear, friction testing and more. Flexible, easy to use and maintain, they offer high accuracy position measurement, rapid data acquisition, multi-lingual and multi-unit display options as well as full PC integration with ISO TickIT accredited NEXYGENPlus material test and data analysis software.
|
|
|
This series of machine is suitable to test the mechanics properties of metal, non-metal and compound materials. It is designed according to GB, JIS, ASTM, DIN, and ISO standards. It can automatically calculate tensile strength; yield strength, elongation ratio and broken strength and other parameters of the materials. It is ideal equipment for quality control and laboratory research in factories and high schools.
|
|
ProLine is a simple and compact test machine that was developed to meet the demand for low-price top-class test machines for functional testing of components and for standard applications on basic materials.
With the ProLine, Zwick Roell meets your demands for fastest delivery times
|
|
The Zwick servo-hydraulic testing machines are flexible and reliable testing systems. They can be adapted to multiple applications such as tests on standard specimens or individual components and assemblies (rubber-metal elements or artificial hips). All servo-hydraulic testing machines are optimized to meet your requirements.
The different load frame types have been designed to guarantee a long life and easy maintenance so that they are a reliable long term investment. Their capacity ranges from 5 kN up to 1000 kN and their testing frequency from a few Hz up to 100 Hz or 200 Hz thanks to their enhanced stiffness and increased natural frequency.
|
|
zwicki-Line
Our zwickis are high-quality, low-cost, and space-saving test machines. They have been designed particularly for applications in the range of mechanical tests with low loads. These machines cover a wide applicational spectrum: from plastics and elastomer testing over paper, textile, and foam material testing and wire tests up to components testing.
ProLine
ProLine is a simple and compact test machine that was developed to meet the demand for low-price top-class test machines for functional testing of components and for standard applications on basic materials.
With the ProLine, Zwick Roell meets your demands for fastest delivery times with a delivery time of only 2 weeks!
|
|
Twin Column Testing Machines 5-50 kN (1124-11241 lbf)
For applications in the mid force range, Lloyd Instruments offers a wide range of testing machines and accessories for forces up to 50 kN (112241 lbf).
Ideal for routine quality control testing or complex multi-stage tests, all machines can perform tensile, compression, flexural, peel, shear, friction tests and many more. Flexible, simple to use and maintain, they provide high accuracy load measurement and are capable of a rapid 8 kHz data acquisition rate. The stand alone system can store up to 600 test results from 10 programmable test set-ups or, with PC integration with Lloyd Instruments powerful NEXYGENPlus material test and data analysis software, can perform advanced data analysis.
|
|
|
It is a universal testing machine capable of carrying out tensile, compression, bending and shearing tests. Operation is manual, semiautomatic, and automatic. The test instrument can be modularised taking into account that the structure con house 3 permanently installed load cells for compression tests, and tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of 1000 Hz. Load cell reads are effected 1,000 times per second. Minimum indexing is 1/32.700 (this can be ircreased by slowing down load cell reading',. The universal testing machine operates with computerized numerical control and includes a computer with HD and touch screen.
|
|
|
|
