|
|
Early detection of developing faults in materials or products is essential for the prevention of costly losses in manufacture and claims resulting from faulty products, which can include consequential damages.
By establishing essential parameters for new products at the outset against which materials can be monitored, risks in safety and the
resulting possibilities for financial penalties are minimised.
Dealing with forces is dangerous. TesT attaches great importance to industrial safety. Universal testing machines made by TesT are fitted with electrically interlocked polycarbonate guarding.
Special safety guards for higher levels of risk or to enclose extra large
specimens are available on request. The safety provision meets the requirements of the European Community directives. Universal Testing machines made by TesT are CE-labelled and delivered with the CE conformity declaration, without any restriction.
|
|
Early detection of developing faults in materials or products is essential for the prevention of costly losses in manufacture and claims resulting from faulty products, which can include consequential damages.
By establishing essential parameters for new products at the outset against which materials can be monitored, risks in safety and the
resulting possibilities for financial penalties are minimised.
Dealing with forces is dangerous. TesT attaches great importance to industrial safety. Universal testing machines made by TesT are fitted with electrically interlocked polycarbonate guarding.
Special safety guards for higher levels of risk or to enclose extra large
specimens are available on request. The safety provision meets the requirements of the European Community directives. Universal Testing machines made by TesT are CE-labelled and delivered with the CE conformity declaration, without any restriction.
|
|
Vibrophores
For fatigue testing of materials or components by applying sinusoid loads Zwick Vibrophores offer an economical alternative using the resonance principle with constant or variable amplitude and mean load.
The Zwick vibrophores combine a maintenance-free system with maximum testing speed at minimum energy requirements.
The wide range of nominal loads (from 5 to 500 kN) enables the widest variety of dynamic tests according to the resonance principle.
With suitable add-ons, testing can be carried out under different environmental conditions (temperature, aggressive media), or torsion or bending tests can be performed. Testing can be performed either force controlled or strain controlled. And, of course, testXpert® will support you with harmonized standard and master test programs.
|
|
The test facilities ElectroPuls are pointed systems which function without hydraulics, intended for the dynamic and static tests of materials and the components. They include/understand an advanced numerical control, the last Console software and improvement of the technology of the tests: count with grooves in T for the flexibility of configuration of the tests, jacks electric for the ordering of the cross-piece and a crowd of other ergonomic functions. They are completely electric and do not require any connection with the compressed air, hydraulics, water nor with any other fluid of service.
E3000:
Dynamic capacity: ±3000 NR (±675 lbf)
Static capacity: ±2100 NR (±472 lbf)
Race: 60 mm (2.36 in)
Space available (max.): 855 mm (33.6 in) maximum with jack with semi-race
Power supply: Single-phase power pack
Configuration: Two columns with jack on higher cross-piece
Adjustment of the cross-piece: Electric elevators and latch bars manual
|
|
|
Dynamic and static testing machine is suitable for materials and components test. Frequency from 0.005 upto 50Hz. Load capacity from 50kN up to 1000kN.
|
|
|
|
|
|
A user-friendly microprocessor-controlled instrument to determine the bending resistance of paper and paperboard!
The Bending Resistance Tester is designed to determine the bending resistance of paper and paperboard using the 2-point bending method.
SPECIFICATIONS
* Choice of 10N or 1000mN load cell
* Min. force sensitivity: 0.5mN with 1000mN load cell
* Selectable bending angle 5.0-90° and test length 5-50mm
* Meets ISO 2493, AS/NZ 1301-4535, BS 3748, DIN 53121, SCAN P29, TAPPI T556
* RS232 serial data output, printer output and analog signal output
* Can be directly calibrated to traceable National standards
FEATURES
* Direct sample to load cell contact aids accurate measurement
* Easy selection of test pararameters from a comprehensive range through a setup menu
* Motorized test length setting
* Instrument can calculate Taber Stiffness units
* Pneumatic clamps with fast release provide consistent clamping pressures for fast, repeatable results
* Large, clear display showing peak value and the angle at which it was achieved
* Load cell fitted with overload protection
* Analog output (use for X-Y recorder—not included)
|
|
|
The Link Model 2500 Rotary Fatigue Machine is designed to reproduce the forces acting on wheel and brake components as seen in vehicles by controlling the magnitude of the cornering forces consistently to determine the integrity of the test components. This machine is capable of testing rotors, wheels, bearing packs, axle extenders, etc. by mounting the test components vertically to a rotating table and applying a varying load at an adjustable angle.
|
|
Max impact energy(J): 150, 300, 450, 600, 750, 3000
Features:
The model ZBC2000 series pendulum impact tester comes from SANS pendulum impact testing machines series family, fashionable design and complete assembly with SANS high technology satisfied with impact resistance tests of metal material under dynamic loading, It is widely applied into the following industries: manufacturer of metal material, quality control of products, institutes and colleges, R&D.
Comply with ISO R148, ISO R83, EN10045, ASTM E23
Optional computer with software control is available to realize semiautomatic operation. Operator only need charge specimens. Others can be controlled by software.
Optional specimen feeding system is available. Combined with computer and software, fully automatic operation can be realized.
Optional cooling chamber is available to satisfy cold specimen test down to -100 OC
|
|
|
|
|
|
Impact testers are designed to determine the impact energy required to break a sample. This information is crucial to manufacturers,as the strength and durability of the product will often determine performance characteristics and marketability. The TMI Impact Testing System uses a high resolution optical encoder and data acquisition to determine the impact resistance of rigid materials in accordance with a wide variety of ASTM and ISO test standards. Interchangeable pendulums and specimen holders are available to measure the impact resistance of a variety of materials. Common test methods include Izod, Charpy, Tension and Laminate testing. Environmental chambers are also available to deliver CO2 or N2 allowing the characterization of materials at cold temperatures. Essentially the Impact test is a single point test that measures a materials resistance to impact from a swinging pendulum. The mass and drop height deliver a definable kinetic energy.
APPLICATIONS
Plastics, Rubber, Light Metals, Ceramics, Wood, Laminates, Adhesives
STANDARDS Conforms to
ASTM D256 and ISO 180 for Izod,
ASTM D256 and ISO 179 for Charpy
ASTM D1822 for Tension Impact testing
OPTIONS
A complete line of Izod, Charpy, and Tension Impact accessories are available.
FEATURES
• Digital display, storage and editing of up to 500 readings
• Selectable units (J/m, ft•lb./in., kg•cm/cm, ft•lb/in², kg•cm/cm²,
kJ/m²)
• RS-232, settable limits, statistics-average, standard deviation, and
high/low results
• Classification of specimens according to failure category
• Auto calibration - automatically calibrates for windage and friction
• Hammers are quickly and easily interchangeable
|
|
|
|
|
|
The Falling Dart Impact Tester is intended for the determination of mechanical properties of packaging material such as plastic films, laminates and paper.
The tester comprises a horizontal base-plate on which a vertical column of steel has been erected and which on its top carries a release mechanism in which the falling dart can be inserted.
The dart consists of a hemispherical part of aluminium with polished surface and a diameter of 38.1 mm (1.5 in.), having a vertical shaft in the center of the flat top surface. Around the shaft additional weights can be fitted.
On the base-plate in the vertical center line of the inserted dart, a circular clamping device has been fitted. This clamping device consists of a firm and a movable cylinder, both having an inner diameter of 127 mm (5 in.).
By means of a handle operated excenter, a sample can be clamped slippage free between both cylinders.
The bottom of the firm cylinder has been provided with a 2-3 mm thick disc of soft rubber in order to eliminate damage of the falling dart.
SPECIFICATIONS
Falling Height: 660 mm (26 in.)
Weight of falling dart without additional weights: 50 g ± 0.5%
Additional weights: 5 pcs. of 5 g ± 0.5%
25 pcs. of 15 g ± 0.5%
5 pcs. of 100 g ± 0.5%
Falling speed on sample: Approx. 3.5 m/sec.
Meets ASTM Standard D 1709-62 Procedure A
Commercial Standard CS 227-59
TNO-Standard I.v.V. 2.15 1968
|
|
Model: ZBC1400, ZBC1251
Capacity: 4J, 25J
Features:
The model ZBC1000 Pendulum Impact Testing Machine is mainly designed to perform special tests for plastic material to determine impact resistance performance under dynamic loading.
It allows continuous impact test for large quantities specimens. Special control panel and display can real-time display impact energy, impact ductility, pendulum raising angels.
Two display methods are available, dial type and digital type (LCD monitor).
It complies with ISO179, ISO180, ASTM D256, ASTM D4812, ASTM D4508, ASTM D950 and other similar standards.
Two models are available
ZBC1400, max Charpy impact energy 4J, max Izod impact energy 2.75J
ZBC1251, max Charpy impact energy 25J, max Izod impact energy 22J
|
|
|
|
|
|
Tear testing measures the force required to continue the tearing of an initial cut in sheet materials. Models and weights are available to test material with a variety of strengths. This is also useful to evaluate strength of perforated materials.
Also known as the Elmendorf test, the tearing test has been performed in the paper industry for more than half century in order to measure the mean internal resistance of cellulose or papers to the propagation of a deliberately initiated tear. It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. newspaper) or liable to be damaged by sharp or heavy objects (e.g. paper bags, seat belts, protective clothing).
FEATURES
- Automatic specimen notching
- Mechanical-pneumatic clamping avoids sample slippage to ensure repeatable results
- Automatic pendulum reset with lifting device
- Tearing force displayed digitally
- RS-232 data output
- Small, table-top instrument
- Maintaining a uniform quality level
- Safety Hood protects operator from injury while pendulum is in motion.
|
|
|
|
|
|
TEAR TESTING
Tear testing determines the force required to continue the tearing of an initial cut in sheet materials. This is also used to evaluate strength of perforated materials such as postal reply cards.
The Monitor/Tear™ is an automated tear tester equipped with an optical encoder, measuring the angular
position of the pendulum during the tearing operation,
and converting this measurement to tear units.
FEATURES
•Digital display
•Storage and editing of up to 500 readings
•Easily interchangeable pendulums ranging from 200g to 6400g
•Auto calibration of pendulum
•RS-232
•Selectable units (percentage, millinewtons, grams)
•Settable limits, Statistics, Average, Standard deviation,
high/low results
•Grips and pendulum releases are pneumatic
•Clamp pressure in psi and kg/cm2
•Calculates and displays average tearing force for single ply values in millinewtons or gram force
•Report printout with optional printer
APPLICATIONS:
Paper, Foil, Film, Textiles, Nonwovens
PENDULUMS
•200 gram pendulum 83-11-02
•800 gram pendulum 83-11-04
•1600 gram pendulum 83-11-05
•3200 gram pendulum 83-11-06
•6400 gram pendulum 83-11-07
•Universal pendulum 200, 400, 800 & 1600 gram pendulums;
the required calibration weights are included 83-11-08
SPECIFICATIONS
Model: 83-11-01
Air: 600 kPa (instrument quality)
Weight: 10.4 kg (23 lbs)
Dimensions W x D x H: 12 in x 12 in x 20 in
(305 mm x 305 mm x 508 mm)
STANDARDS
Conforms to TAPPI T-414, ASTM D1922 and D1424, ISO 1974, CPPA d.9, AS/NZ 1301.400S, BS 4468 and SCAN P-11
Other Models
Standard Elmendorf Tear Tester (TMI 83-10-00)
|
|
Impact testing machine for metal and non-metallic
Impact test conforms to ASTM, ISO and GB standards with Charpy Izod and Tensile impact includes analogs, digital and computer. It is also with instrumented to get the curves and characteristic data for impact test.
From the applications, it includes:
- Measuring range from 300J up to 800J for metal
- Measuring range from 1J up to 50J for non-metal
- Charpy, Izod, Tensile impact for metal and non-metal
- Instrumented function can be with the impact test
- Lower temperature bath is optional for environment test
|
|
Ear Measuring Instrument, Model 126
Used to obtain a numerical value of the size of the ears resulting from anisotropy in the material of cylindrical deep-drawn cups (e. g. according to DIN 50 155). The average cup height, the height of the ears in percent and in mm can be read-off at a touch of a button and are shown on the digital display instrument. To enable additional data processing the test instrument can be equipped with interfaces, such as BCD or RS 232 C outputs and with a printer.
|
|
Unrivalled performances …
AG-X : You door to the future..
Experience unsurpassed reliability and operability with the new Shimadzu Autograph AG-X. This revolutionary new model delivers high-level controlled measurement performance utilizing a combination of patented technology from earlier models and world-class innovations.
Development of this series focused on intuitive operation and convenient support functions, resulting in standard equipment that includes both a color TFT touch panel screen for PC-free operation and the very popular Smart Controller operation featured on many of our earlier testing machines.
The TRAPEZIUM X software has also been newly developed, using cutting-edge Microsoft .NET technology to enhance user-friendliness. Shimadzu's new AG-X series advances testing in three areas performance, operability and support.
Don´t miss your chance to find out more about our Universal Testing Machines, Hardness Tester and Capillar Rheometer
|
|
Model: YAW4305, YAW4605, YAW4106, YAW4206, YAW4306
Capacity: 300kN, 600kN, 1000kN, 2000kN, 3000kN
Features:
This testing machine is mainly used to test compression strength of cement, concrete and rocks. Meanwhile they can perform shear test, anti-break test, and Elastic Modules test of concrete with special compression fixtures and measurement assembly.
YAW series' systems are guaranteed to meet ISO 15579-2000, ISO679, ISO 7438-1985 and other international and national specifications. With advanced, precise, full digital and graphic displaying instruments, it can be used to determine compression-resistance strength of building materials such as bricks, stones, concretes, cements and so on. When equipped with corresponding grips and measuring devices, it can perform break-resistance test, split test of concretes, as well can be used to carry out compression and punch break test of metals.
|
|
FEATURES
- Load Capacity 1000 LB (4448 N)
- Platen size 7 x 7 in (178 x 178 mm)
- Test speed 0.2- 20 in/min (5.08-508 mm/min)
- Return speed 4 in/min (± 101 mm/min)
- Color LCD Display
- Menu-driven software
- Test results and statistics are displayed on a large high contrast color LCD screen
- Preset keys for all relevant tests
- Automatic fast return platen saves testing time
- Multi-language programmed- 7 languages
- 8 Corrugated Test Methods for quick access
- Measuring units include: N, N/m², lb, lb/in², kg, or kg/m²
- RS232C serial data output
- Built-in Printer
|
|
The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner, and offers unrivalled repeatability and reproducibility. Considerable cost savings are possible through accurate prediction of corrugated component performance.
APPLICATIONS
Paperboard, Paper, Liner, Medium, Paper/Film/Foil, Laminations
SPECIFICATIONS
* Load cell range: 0-500N
* Clamp length: 1.2 in (30 mm)
* Free span: 0.03 in (0.70 mm)
* Adjustable clamping force
* Load cell capacity: 100 lb (444 N) with overload
protection
* Conforms to TAPPI T-826, ISO 9895, SCAN P46,
AS/NZ 1301.4SO RP, BS 7325, DIN 54518
FEATURES
* Unique clamping mechanism
* Test statistics at the push of a button
* Selectable units kN/m, lb/inch, N
* Load cell with overload protection
* Easy to read display
* Traceable calibration
* RS232 serial data output
|
|
|
|
|
|
The Programmable Force Tester is a highly configurable motorized test stand for tension and compression testing applications up to 1.5kN (300 lb). The stand can be controlled from the front panel or via a computer and is fully compatible with Nexygen™ TCD software. The Programmable Force Tester is engineered on a unique modular platform, allowing for “build-your-own” configurability. Features can be ordered individually at time of order or activated in the field. Integrated travel indication, overload protection, and a host of programmable parameters makes the tester quite sophisticated, while its intuitive menu structure allows for quick, simple setup and operation. A password can be programmed to prevent unauthorized changes. With a rugged and modular design, the Programmable Force Tester is a compelling solution for applications in laboratory and production environments.
Standard Features
- LCD display with UP, DOWN, STOP, and emergency stop buttons and soft keys
- Selectable speed units of measurement (mm/min & in/min)
- Password protection of test parameters, to prevent unauthorized changes
- Integrated travel limit switches
- Removable fixture mounting plate with matrix of threaded holes
- Stepper motor-driven, produces 0% speed variation with load
- Mounting holes for bench mounting
- Unique mechanical design significantly reduces column bending
|
|
Model: SHT5205P; SHT5305P; SHT5506P; SHT5605P; SHT5106P; SHT5206P
Capacity: 200kN; 300kN; 500kN; 600kN; 1000kN; 2000kN
Features:
SHT5000P series are based on SANS SHT5000 series servo hydraulic testing system and improved with side action grips.
This series adopts international advanced side action grip technology and solve the problem of load dropping during large force test and high frequency batch test. Gripping force is auto controlled and stable for tensile test of high strength, high hardness materials, stranded wire, and other hard-to-clamp specimens.
Dual side action allows synchronous clamping specimens and ensures precise center alignment. This deign can also eliminate lateral force on specimens before test which is common in wedge action grips.
|
|
|
The ADMET eXpert 26xx series twin ballscrew universal testers are designed for users who want the power of a full-size system and the versatility to test materials, components and structures. Offered as bench top testers with capacities to 50KN , the eXpert 26xx series machines tackle the toughest tests with their superior axial alignment, stiffness and crosshead guidance. The ADMET floor standing models feature wide column spacings to accommodate larger grips and fixtures, temperature chambers, special test fixtures and full-size parts.
|
|
Tensile testing is the most widely used method for indicating the serviceability of many papers. Tensile Energy Absorption (T.E.A.) indicates the durability of papers which are subjected to repetitive straining and stressing. The Horizontal Tensile Tester offers menu driven pre-selection of parameters and infra-red sample detection for quick, effortless testing.
FEATURES
- Test statistics generated at the push of a button
- Load cell protected
- Auto return after test complete
- RS232 serial data output
- Wet test option
- Serial Printer output
- Multi-language standard
- Menu driven pre-selection of parameters and infra-red sample detection
- Two pre-set test types are machine direction and cross direction
- Optional software can add hand sheet tensile test
|
|
Model: SHT4305W, SHT4605W, SHT4106W
Capacity: 300kN, 600kN, 1000kN
Features:
1. Dual test space provides compression in lower space and tensile test in upper space.
2. Half-open hydraulic grips is easy to place specimens and has high rigidity.
3. Lower crosshead is driven by worm wheel with high stability.
4. Spoke shape load cell is connected with piston, which ensures high precision measurement.
|
|
|
|
|
|
Model: CMT5504; CMT5105; CMT5205; CMT5305; CMT5505; CMT5605
Capacity: 50kN; 100kN; 200kN; 300kN; 500kN; 600kN
Features:
These rugged electromechanical UTMs feature SANS strain gage load cell force measuring systems. Choice of single working space or dual working space load frame and maximum frame capacities from 50N to 600kN. Options for the Electomatic machines include extra length screws and columns for extraordinary sized samples.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application. SANS professional testing software and proprietary control system ultimate come true closed loop testing and control of load, extension and displacement.
Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. Extending function: Equipped with multi-load cells to meet the further requirement of customers
6. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
7. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5%% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution:
|
|
|
|
|
|
The Lab Master Release and Adhesion testing system operates with Windows® Based Software, and features: The ability to create user-defined test set-up, individual test speed selection, user-definable default areas for analysis, exporting graphs or data to Microsoft Excel and SPC programs, and enhanced Calibration - verifies existing and new calibration, and keeps a calibration log for ISO record keeping. Test data visually represents the characteristics of the peel.
APPLICATIONS
Tape, Pressure-sensitive labels, Release Paper, Blister Packs, Closures, Medical Products, Seals, Security Labels
SPECIFICATIONS
* Standard range of 0–11,339 g (0–25 lb)
* Other Load Cells Available
* Tests samples up to 5 cm (2 in.) wide with maximum peeling length of 30.48 cm (12 in.)
* Variable speeds from 30.48 to 4064 cm and 12 to 1600 in.
STANDARDS
Meets TLMI L-IA1 and L-IA2, PSTC-1, 3, and 4, and FINAT FTM 1, 2, 3,& 4
FEATURES
* Analysis of raw data collected from pull for immediate feedback of test results
* Intuitive user-friendly controls
* Accurate field calibration with built-in ISO 9000 compliance record-keeping with on-screen user definable “calibration due” alerting
* PC Network compatibility for output of other lab management systems
* Test Materials at 90°, 135°, and 180° angles of peel
* Piezoelectric sensing system
|
|
Good things come in small packages!
We are proud to introduce our NEW model 84-76 Tensile Tester. The instrument has a small footprint just over 90 square cm (14 square inches). Our model 84-76 provides a large 5.7 inch color display, intuitive opera¬tor interface, software control, integrated printer & serial port for data collection.
The new unit is designed to test strength of sheet mate¬rials including Paper, Board, Tissue Paper, Film Packaging Seals, Adhesives, Pressure Sensitive Tapes and a variety of low force tensile applications up to 1330 N (136 Kg, 300 lbs).
The Model 84-76 Tensile Tester is a robust, precision, tensile strength instrument suitable for rugged produc¬tion environments yet designed to provide highly accu¬rate measurements for research applications.
|
|
Dynamic Mechanical Tester
DForce is a low force mechanical testing system capable of performing static and dynamic tests to 15 Hz in tension or compression. Typical uses include determining the force-deflection properties and fatigue life of biomaterials, composites, medical devices, packaging, products and more. DForce actuators are linear motors that come in three frame sizes providing continuous forces from 20N to 275N and peak forces from 90N to 1850N. Actuator strokes range from 25mm to 300mm. An internal dry bearing provides clean quiet, maintenance free performance.
|
|
|
|
|
|
bottle or jar opening tester : ANDITORK EA
The ANDITORK EA bottle or jar opening tester is specially designed to measure opening torques for bottles and jars.
Opening tester with ring securized cap : ANDITORK ST
If the cap has a security ring, the test can be carried out using the ANDITORK ST
Tester for small bottles : MICROTORK
The MICROTORK is specially designed for small bottles, and it is equipped with a small grip plate whose fingers can be used to hold small containers.
Available in Easy and Star versions.
Anditork Security : ANDITORK DL
The ANDITORK DL product is designed to measure opening torques with downward force.This procedure is used to check safety caps.
motorized opening torque measuring instrument : DRIVETORK
The DRIVETORK motorized opening torque measuring instrument is just the right equipment for production teams that have to carry out a lot of opening tests and want to eliminate the variability linked to operators.
Torsion test stand : TWIST
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test
stand.
The TWIST, a 1 to 12 NM torsion test stand
with combined Torque/Angle measurement provides this function.
Torque wrench calibrator : CENTOR Meter W
The CENTOR Meter W torque wrench calibrator enables verification of torque wrenches thanks to a series of reference sensors ranging from 22 to 222 NM.
torque screwdriver calibrator : CENTOR Meter H
A set of low-capacity reference torque sensors enables use of the CENTOR Meter H torque screwdriver calibrator to verify torque screwdrivers from 1 Nm to 6 Nm.
|
|
|
|
|
|
Model: CMT4102; CMT4202; CMT2502; CMT4102; CMT4103; CMT4203; CMT4503
CMT4104; CMT4204; CMT4304
Capacity: 100N; 200N; 500N; 1kN; 2KN; 5KN; 10KN; 20KN ; 30KN
Features:
These rugged electromechanical UTMs feature SANS strain gage load cell force measuring systems. Choice of single working space or dual working space load frame and maximum frame capacities from 100Nto 30kN.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
SANS professional testing software and proprietary control system ultimate come true closed loop testing and control of load, extension and displacement.
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution: Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. Extending function: Equipped with multi-load cells to meet the further requirement of customers
6. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
7. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC
|
|
|
|
