|
|
|
Kembond SSC-RTV is a single component electrically conductive adhesive comprising of silicone resin filled with conductive silver-plated copper particles. It cures on exposure to air at room temperature to form an electrically conductive flexible silicone elastomer. Once cured it adheres strongly to a wide range of substrates. Can generally be used a replacement for CA811.
|
|
|
|
|
|
Master Bond Inc. offers a broad line of electrically conductive adhesives, sealants and coatings which are widely used in the electronic and electrical industries. They are formulated with metal powders and flakes such as silver, nickel, copper and silver-coated nickel, with silver formulations exhibiting the highest levels of electrical conductivity. Graphite filled formulations have also been developed for use where metal additives are not desirable. Master Bond offers a number of room temperature curing and low elevated temperature curing, electrically conductive systems for applications where heat sensitive components must be bonded to circuit boards and other assemblies or for repair of circuitry.
Also available are electrically conductive coatings which are widely employed for EMI/RFI shielding of plastic molded parts to prevent undesirable electrical interference. The newest innovation is our multi-functional, electrically conductive film, FL901S, which can be used as adhesive, sealant or coating. This silver film is available in a variety of shapes and sizes and offers ease of assembly with minimal waste.
Master Bond invites you to take advantage of our “one on one" support policy offering prompt technical assistance from our experienced, professional staff.
|
|
Our comprehensive elecolit® series offers following adhesives:
Thermally conductive, see product overview
electrically conductive, isotropic und anisotropic - see product overview
UV-curing conductive adhesives
Our elecolit® adhesives are ideal for:
Die-Bonding,
powermodul bonding,
Antennaprint and antennacontact
Anisotopic Bonding with der Panacol heat sealing press
|
|
|
These conductive resins consist of conductive fillers - silver, copper, nickel and other metals plus carbon - and synthetic resin. We offer three convenient forms of products: adhesive, paste and coating material to fit any specific application. Unlike solder, this material firmly bonds plastic, rubber and ceramics. Therefore, it has a wide variety of uses for example bonding lead wires, electrodes, semiconductor elements, EMI parts, jumper wire, manufacturing and repairing printed circuits, through holes and other electronic parts that require conductivity. Coupled with anisotropic conductive adhesives that easily bond high density, multi-terminal circuits, the Three Bond 3300 series will surely meet the demands for smaller and higher density electronic parts.
|
|
|
|
|
|
Master Bond offers a broad line of electrically conductive adhesives, sealants and coatings which are widely used in the electronic and electrical industries. They are formulated with metal powders and flakes such as silver, nickel, copper and silver-coated nickel, with silver formulations exhibiting the highest levels of electrical conductivity. Graphite filled formulations have also been developed for use where metal additives are not desirable. Master Bond offers a number of room temperature curing and low elevated temperature curing, electrically conductive systems for applications where heat sensitive components must be bonded to circuit boards and other assemblies or for repair of circuitry. Other applications range from the construction of disc drives to die attach and flip-chip processes.
Also available are electrically conductive coatings which are widely employed for EMI/RFI shielding of plastic molded parts to prevent undesirable electrical interference. There is also an increasing demand for electrically conductive sealants. Master Bond offers both two and one part conductive sealants. The two part systems are primarily epoxies. The one part types are heat cured epoxies and room temperature curing acrylics and elastomers.
|
|
|
|
|
|
Master Bond Inc. offers a broad line of electrically and thermally conductive adhesives, sealants, coatings and potting compounds which are widely used in the electronic, aerospace, optical and electrical industries. They are formulated with ceramic and metal powders/flakes such as silver, nickel, copper, graphite, boron nitride, aluminum nitride, aluminum oxide and silver-coated nickel. Our line includes electrically and thermally conductive epoxies, silicones and rubber based compounds. They feature excellent conductivity along with good physical strength and/or ease manufacturability
Also available are electrically conductive coatings which are widely employed for EMI/RFI shielding of plastic molded parts to prevent undesirable electrical interference. Compounds are available in hundreds of grades to meet your specific requirement. These vary from high strength, general purpose adhesives, sealants and coatings systems to highly specific “tweaked” applications. Master Bond invites you to take advantage of our “one on one" support policy offering prompt technical assistance from our professional staff. They have years of experience, and will assess your problem and work with you throughout the design, prototype and manufacturing process.
|
|
DELO-MONOPOX AC:
one-component, anisotropic electrically conductive adhesives,
heat-curing
DELO-MONOPOX:
one-component, non-conductive, heat-curing, reactive resins
Flip-chip bonding
The adhesive fulfils the task of the underfiller (no-flow underfilling) and of the contacting in one process step Fixing of SMD components
Tailor-made adhesive - DELO-MONOPOX MK096 - for fixing melves and glass SMD components
Properties:
DELO-MONOPOX AC:
enable production in the smart card and smart label industries to be noticeably rationalised by highly automated processes.
E.g., flip-chip technology: chip is set and contacted in one process step
DELO-MONOPOX:
extremely rapid curing
for flip-chip bonding and as Die Attach
Fixing of SMD components
Chip encapsulation compounds for the automotive sector and high-quality industrial products
Application areas:
Assembly
Smart card / Smart label
Micro-electronics
Automotive electronics
|
|
CHO-BOND® Adhesives
CHO-BOND® adhesives are electrically conductive epoxy and silicone resins that cure at room temperature, elevated temperature or in humidity. CHO-BOND epoxies are two-part, silver-filled or silver-plated-copper-filled adhesives which cure at room or elevated temperatures into rigid structural bonds for attaching EMI vents, windows, mesh gaskets, or for filling cracks and seams. CHO-BOND conductive silicones contain silver-plated-copper. Their flexible nature in cured form is ideal for bonding conductive silicone gaskets in place.
|
|
Glues and conductive paints:
Silver Conductive
Resin
12097
Flexible Silicone
Adhesive RTV 1030
Flexible Silicone
Adhesive/Sealant
RTV 1038
Nickel Paint
4015
Silver Epoxy
584-29
Silicone/Métal
Bi-Component Glue
1029
Coating
4090
Silver Paint
4900
Epoxy Nickel
Filled
GT 4120
|
|
|
The products in the ThreeBond 3300 series are conductive adhesives, each made up of a synthetic resin and a conductive filler containing metal such as silver, nickel, or carbon. They offer strong bonding to plastic, rubber, or ceramic, and can easily be used on assemblies that require soldering. They are widely used in producing printed circuits, bonding wire leads to electrodes, and bonding semiconductor elements and EMI parts. The series also includes anisotropically conductive adhesives that offer strong jointing of high-density multiterminal circuits such as LCDs, to meet requirements for smaller, denser, higher-precision electronic parts. The series includes liquids and tapes.
|
|
Scapa Semi-Conducting tapes perform electrical functions within a cable. Their primary function is to equalise the field current around the conductor or core and to ensure electrical contact with the earthing system. This reduces the electrical stress on the insulation material and enhances performance. They can also be used to prevent electrolytic corrosion of metallic armour layers.
Our range of semi-conducting tapes offer excellent solutions for both core and conductor screening. They prevent extrudate penetration of the conductor wires, and with high tensile strength and abrasion resistance, help to prevent ‘birdcaging’ through strong binding properties.
The range also incorporates tapes which have first class bedding characteristics, and are available in a plain or printed format. All of these tapes are free from halogens and sulphur to improve fire safety and prevent copper staining.
|
|
Isotape® and Intertape® tape brands offer a wide range of backings and adhesive systems to meet the current application requirements of the electrical industry. This electrical insulation product line is manufactured under the strictest standards, with performance and reliability in mind. Most of the adhesive tapes carry UL recognition (UL E20780 for Intertape® products and UL E315208 and E315249 for Von Roll).
Von Roll teams work at developing products that provide our customers with outstanding quality and service.
Our distribution networks and company sales offices are conveniently located throughout Europe and Asia. Our highly trained sales and service representatives offer quick response with the technical expertise you need.
|
|
3M™ Adhesive Transfer Tape
Pressure-sensitive adhesive on a release liner that allows you to quickly bond two surfaces together. Available in a variety of acrylic adhesive formulations to help meet production and end use requirements. Apply by hand or with a dispenser.
|
|
* Flame retardant and self extinguishing - safe to use on electrical cables
* Wide range of colours - suitable for colour coding
* UV resistant
|
|
| ... products without technical information |
| |
Nida-Bond is a specially formulated, polyester based core bedding compound developed by Nida-Core Corporation for hand lay-up and vacuum bagging core installation. Use of premium resins results in high tensile and flexural strength. Its high adhesive strength provides an excellent bond between the core and the laminate. Its is suitable for most coring applications and is compatible with our Foamline, BalsaLite and Nida-Core, TecnoCore, PVC and SAN foam core materials. Characteristics include: lightweight, non-sagging, and long working time for coverage of large areas. Consult MSDS for additional handling, storing and safety information. NidaBond is available either Pumpable or Trowelable.
|
|
The challenges in the production of lightweight composites increase with the multitude of materials. In these applications, the adhesive plays a decisive role. Beside bonding durably and reliably, it has to perform additional functions: flame retardation, blocking or controlled permeation of vapor, damping of vibrations, accommodating elongation differences, and much more.
New: for the manufacture of sandwich elements of aluminum or composites such asa FRP and an aluminum honeycomb core, we recommend viscoelastic Collano® adhesive films. Their adhesive strength exceeds the performance range of reactive systems, and they provide the composite with high resistance against fatigue and shock.
The new Collano® A8 is ideal for the manufacture of sandwich elements with fire-stopping properties and extreme mechanical alternating loads and vibration stresses. It is not only flame-retardant but at the same time very tough and elastic.
|
|
|
Master Bond Inc. formulates a wide range of one and two component adhesive systems for bonding metals. From aluminum to cast iron to stainless steel to titanium select Master Bond for your specific needs. They will speed productivity, reduce waste, save energy and enhance produce capabilities. Job proven for over 30 years, Master Bond products are employed in industries ranging from aerospace, optical and electronics to oil/chemical processing, medical and automotive.
|
|
10:1, flexible methacrylate adhesive offering fast fixturing and cure time to thermoplastics and composite materials. Fast setting formula allows for quick turn around for assembly parts. Excellent adhesion to galvanized metals when used with Metal Prep 90. Use with Mix Nozzle #14287
KEY FEATURES
* Designed for bonding thermoplastics, thermosets, metal, and composite assemblies
* Superior impact and fatigue resistance
* 10:1 formula
* Functional cure in 1 hour
* Bonds galvanized metal with Metal Prep 90
* Tensile elongation to 100%
|
|
NORPOL FI-177-10 is a low exotherm, light-weight sandwich adhesive, based on a high quality ISO/NPG resin. NORPOL FI-177-10 is accelerated and changes colour from light blue to white shortly after the admixing of peroxide.
•Recommended peroxide dosage: 1.5% low exothermic Peroxide (NORPOL PEROXIDE 19)
•Recommended application temperature interval 18-23 ºC
VARIOUS PROPERTIES
NORPOL FI-177-10 is mainly used to bond single core material sheets together and for bonding core material to GRP laminates.
NORPOL FI-177-10 is formulated for use in vacuum bagging.
The bonding paste should be stored at 18-25 ºC .If the product have a temperature <18 ºC (which is no problem as to product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa
|
|
NORPOL FI-170 is a multi-purpose bonding paste based on special polyester resins combined with selected fillers and additives.
NORPOL FI-170 is pre-accelerated and has a white colour. NORPOL FI-170 changes colour from bluish white to white in <5min. after the admixing of peroxide.
•Recommended peroxide dosage: 1.5% MEK Peroxide (NORPOL Peroxide 1)
•Recommended application temperature interval 18-23 ºC
•Sag/flow: Will not sag provided a maximum thickness of 15 mm is observed. Not horizontally self-flowing.
Applicable as a general purpose bonding paste.
VARIOUS PROPERTIES
Suitable surfaces: Glass-fibre reinforced products and cellular plastics.
Workability: Hard to grind.
The bonding paste should be stored at 18-25 ºC. If the product is below a temperature of 18 ºC (which does not affect product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa
|
|
The GRAVICOL® range of bonding pastes are designed for the assembly and bonding of glass reinforced plastic moldings. All of the bonding pastes in the range are pre-accelerated and require only the addition of a
standard MEKP catalyst. The pastes can be used for bonding two parts, insert panels, core materials. They can also be used for cavity filling and as an aid to lamination to help reduce the chance of air voids. When designing the bonding pastes there are several key areas we look at and control to
suit the numerous application areas of the pastes : - Gel/Cure Times - Low Shrinkage Levels - Application Methods - Mechanical Properties
|
|
|
|
|
|
NORPOL FI-184 is a vinyl ester based bonding paste for bonding polyester laminates giving joints with great strength and toughness.
NORPOL FI-184 is pre-accelerated and is changing colour from light grey to yellowish/brown <5min. after the admixing of peroxide.
•Recommended peroxide dosage: 2.0% CHP peroxide (NORPOL PEROXIDE 24)
•Recommended application temperature interval 18-23 ºC
•Sag/flow: Will not sag provided a maximum thickness of 20 mm is observed. Not horizontally self-flowing.
•Thicknesses up to 15 mm can be applied in one operation without causing cracks when curing
NORPOL FI-184 is suitable for machine application. We recommend running tests with the machine before starting the bonding job to ensure proper admixing of the peroxide.
VARIOUS PROPERTIES
Suitable surfaces: Glass-fiber reinforced products and cellular plastics.
Workability: Hard to grind.
The bonding paste should be stored at 18-25 ºC .If the product have a temperature <18 ºC (which is no problem as to product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa
|
|
Chemically Fuse Engineered Plastics and Composites with Little or No
Surface Preparation
Unlike other adhesives and putties, Plexus "Fiberglass Fusion" Adhesives chemically fuse FRP, composites, and almost all polyester resins and gelcoats. Because they require virtually no surface preparation, Plexus Adhesives reduce assembly times by up to 60%. They produce bonds so strong that the substrates will delaminate before the bonds fail. Tough and durable, these super adhesives offer exceptional flexibility, impact strength, and resistance to fuels, chemicals, and water.
|
|
No Grinding or Surface Preparation
Plexus Adhesives bond engineered plastics, SMC, FRP, metals, and dissimilar substrates without grinding, surface preparation, or primers. As a result, they eliminate time-consuming and costly operations, lessen process variability, minimize dust, and greatly reduce the problems associated with toxic solvents.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
