|
|
The Bergquist Company is the world leader in the development and manufacture of thermally conductive interface materials. Thermal Clad Insulated Metal Substrate (IMS®) was developed by Bergquist as a thermal management solution for today's higher watt-density surface mount applications where die size is reduced and heat issues are a major concern.
Thermal Clad Benefits Include:
Lower operating temperature
Reduce printed circuit board size
Increase power density
Extend the life of dies
Reduce the number of interconnects
Improve product thermal and mechanical performance
Combine power and control
Improve product durability
Enable better use of surface mount technology
Reduce heat sinks and other mounting hardware including thermal interface material
Replace fragile ceramic substrates with greater mechanical durability
|
|
|
ERNI offers the industry's widest array of cable housings, strain reliefs and guide elements. These complementary items to the DIN 41612 / IEC 60603-2 connector family are available for all of the popular types including B, C, D, F, H, Q and R and 1/2 sizes. The cable housings offer rear and two sided exit options, with strain relief for wire, jacketed cable or flat cables. The guide elements are available with keying and screw lock features for applications including: edgecards, backplanesm front panel, rear panel and other 19" Eurocard subrack mounting applications
|
|
Flex circuits make electronic interconnection both simpler and more reliable. They translate the advantages of printed circuits to three dimensions, replacing conventional wiring. Minco specializes in tight tolerance, fine-line circuits for the medical and aerospace industries. From guidance systems to cardiac pacemakers, Minco flex circuits set the standard for assured quality.
Flexible and Rigid-Flex Circuits
* Fine pitch down to 0.003 inch (0.08 mm) lines & spaces
* Stiffeners or rigid zones for component mounting
* Up to 16 layers
* Impedance control with shield planes and other techniques
* Combine with surface mount technology for ultimate packaging density
* CAD/CAM interface
|
|
- TCG - Card Guide, Tension Series
- TRCG - Card Guide,Tension Series
- RCGH - Caard Guide,Tension Series
- RCG - Card Guide Series
- RN - Card Guide,Narrow Series
- RDC - Card Guide,Deep Series
- RSDC - Card Guide Series
- RSFS - Card Guide Series
- ACGC - Card Guide,Adjustable Series
- PCG - Card Guide, 4 Ft Series
- BMS-S - Card Guide,Single Sided Series
- RSSHG - Card Guide,Horizontal Series
|
|
Card Guides & Pullers
Richco’s pullers are designed to solve difficult insertion and extraction problems associated with removing large PCB’s and tight gripping multi-pin edge connectors. Our pullers use a cam in/out action enabling leverages of up to 4:1. Ease of use, installation and protection from undue stress for damage-free insertions and extractions of PCB’s, components, and connectors are the main benefits from the use of our pullers. Passivated stainless steel spring pins as per MIL-P-10971 are provided with certain ejectors. Richco pullers have been designed to meet the increasing need to support PCB’s mounted in a vertical position in order to save space. Our wide selection accommodates various board sizes and allows for paired mounting and gang or tandem mounting. The use of standard fasteners simplifies mounting.
|
|
YFLEXTM, developed based on Toshiba's B2itTM technology, is a build-up printed circuit board with conductive bumps applied between the interconnection layers.
Not requiring through-hole drilling or plating, YFLEXTM is an environmentally friendly product that allows users to reduce drilling debris or chemical usage.
|
|
|
Tech-Etch manufactures high reliability flexible printed circuits on polyimide substrates using advanced manufacturing processes. We specialize in single and double-sided circuits, as well as multi-layer and flex circuit assemblies. The flex circuits are built to the exacting specifications of our customers, meeting the most demanding of applications in the ultrasound probe, medical device, semiconductor test & manufacturing equipment, industrial equipment, and aerospace markets. With all engineering, tooling, and manufacturing operations housed in our state of the art 150,000 sq. ft. facility in Plymouth, MA, Tech-Etch is the perfect choice for all of your flex circuit needs from quick turn and prototype through production volumes.
|
|
Nuloc: Hypertac interconnect’s solution for ERTMS.
Hypertac innovated by integrating into the Nuloc interconnection system a unique recognition code for each locomotive and by adapting the cable antenna dimension to each locomotive type.
The coding function is generated on an embedded printed circuit inside the connector receptacle. The code is programmed during the final manufacturing phase. This code is the “DNA signature” given to each SNCF locomotive that will ensure the reliability of the unique train identification on the European rail network system management.
The interconnection system also integrates a coaxial cable assembly to link to the antenna. ERTMS being a retrofit on the existing equipments, each cable assembly must be dimensioned to the locomotive type. This is done during the manufacturing process according to the instructions specific to each order.
|
|
Tyco Electronics offers a broad portfolio of connectors for main Memory modules, removable Memory cards and microprocessors made to the many industry standard specifications.
The Tyco Electronics main Memory connectors are made to JEDEC industry standards for SIMM (Single In-line Memory Modules) and DIMM (Dual In-line Memory Modules) for computer and communication applications. Each product family consists of vertical, right-angle and various angled configurations in solder tail, press fit and SMT mounting options.
|
|
|
Our flexible base materials are proven starting materials in the manufacture of flexible printed circuits and SmartCards. These lightweight, flexible and space-saving components are being used to an ever greater extent in all areas of electronics: Circuits in cameras, mobile phones and automobiles.
|
|
Advanced Interconnections invented the world's first, flexible, removable terminal carrier. Made from a RoHS Compliant polyimide film carrier that acts as its own insulator, Peel-A-Way® is a versatile, patented design that can be produced in many configurations including PGA, DIP, SIP, and Board to Board. The flexible design and removable feature allow for increased air flow and total visual inspection of solder joints.
Featured with :
- Board to Board applications on tight spacing as low as .050" (1.27mm)
- available in sheets for multiple terminal loading across the PCB
- wide range of patterns and terminal styles
- removable film carrier allows for low profile device mounting
- works with thru-hole and surface mount technology
- RoHS Compliant insulators and terminals are compatible with lead-free processing - select either Matte Tin/Gold (MG) or Gold/Gold (GG) plating
|
|
| ... products without technical information |
| |
|
|
|
|
Forward Soil Plates
Dynapac offers a comprehensive range of forward soil plates that are specially designed for compacting granular soils. They are ideal and most economical for small repair and maintenance work. Forward plates are also a compliment to rollers that may not be able to operate effectively in confined spaces.
Forward Asphalt Plates
Dynapac offers a comprehensive range of forward asphalt plates that are specially designed for compacting asphalt. They are ideal and most economical for small repair and maintenance work, such as driveways, pathways and parking lots. Forward asphalt plates are also a compliment to asphalt rollers that may not be able to operate effectively in confined spaces.
Forward & Reversible Plates
The range of forward and reverse plates are an economical alternative or compliment to a roller. These allround machines are specially designed to compact soil in confined areas, such as in trenches and parking lots, among other areas. Forward and reverse plates are also suitable for special applications, such as block paving. Forward & Reversible plates are also a compliment to rollers that may not be able to operate effectively in confined spaces.
|
|
Ammann aims to offer users all the benefits of modern technology, in line with constantly changing requirements on construction sites. The focus is on people: alongside high performance and efficiency, user-friendliness is a key factor in our machines.
More than 15 years ago, we broke new ground by developing hydraulically-driven vibratory plates. Nowadays Ammann is numbered among the leading providers in this equipment category.
|
|
Ammann aims to offer users all the benefits of modern technology, in line with constantly changing requirements on construction sites. The focus is on people: alongside high performance and efficiency, user-friendliness is a key factor in our machines.
More than 15 years ago, we broke new ground by developing hydraulically-driven vibratory plates. Nowadays Ammann is numbered among the leading providers in this equipment category.
|
|
Plate compactor
Extremely simple construction provides toughness never susceptible to accidents, leading to low running cost.
Speedy and continuous compacting work the machine offers reduces working hours and greatly enhances work efficiency.
Easy to handle. With low center of gravity, the machine is also suitable to compact slopes.
The carrier for short-distance transport(Optional specification) is easy to mount and dismount.
|
|
Reversible Plate Compactors
Reverse at full RPM while tackling heavy-duty compaction jobs. These models are flexible and utilize an advanced hydraulic reversing mechanism for unparalleled durability. They're perfect for compacting granular soils and asphalt.
|
|
|
|
|
|
VDR 22 - REVERSIBLE VIBRATORY PLATES
Weight kg 120
Frequency Hz 100
Centrifugal force kN 22
Compact. plane width mm 400 x 700
Engine HONDA Type GX 160
Output kW 4,0/3600
Starting recoil
VDR 26 - REVERSIBLE VIBRATORY PLATES
Weight kg 160
Frequency Hz 95
Centrifugal force kN 26
Compact. plate width mm 450
Engine HONDA Type GX 200
Output kW 4,8
Starting recoil
VDR 26H - REVERSIBLE VIBRATORY PLATES
Weight kg 170
Frequency Hz 95
Centrifugal force kN 26
Compact. plate width mm 450
Engine HATZ Type 1B20
Output kW 3,6
Starting recoil
VDR 63 - REVERSIBLE VIBRATORY PLATES
Weight kg 430
Frequency Hz 70
Centrifugal force kN 63
Compact. plate width mm 750
Engine HONDA Type iGX440
Output kW 11,2
Starting recoil
VDR 63E - REVERSIBLE VIBRATORY PLATES
Weight kg 430
Frequency Hz 70
Centrifugal force kN 63
Compact. plate width mm 750
Engine HONDA Type iGX440
Output kW 11,2
Starting electrostart
VDR 63H - REVERSIBLE VIBRATORY PLATES
Weight kg 440
Frequency Hz 70
Centrifugal force kN 63
Compact. plate width mm 750
Engine HATZ Type 1D50
Output kW 8,1
Starting handle
VDR 63HE - REVERSIBLE VIBRATORY PLATES
Weight kg 450
Frequency Hz 70
Centrifugal force kN 63
Compact. plate width mm 750
Engine HATZ Type 1D50
Output kW 8,1
Starting Elektrostart
|
|
Forward Plate Compactors
These compactors are recognized as the industry standard for top performance, easy handling, low maintenance and long life. Perfect for use on granular soils and asphalt
Reversible Plate Compactors
Reverse at full RPM while tackling heavy-duty compaction jobs. These models are flexible and utilize an advanced hydraulic reversing mechanism for unparalleled durability. They're perfect for compacting granular soils and asphalt.
|
|
D 301 / 11 - VIBRATORY PLATES NON-REVERSIBLE - PRACTIC
Weight kg 60
Frequency Hz 92
Centrifugal force kN 11
Max. speed m/min 25
Length x width compact. plate mm 300 x 520
Engine HONDA Type GX 100
Rated engine power @ RPM kW 2,2/3600
VD 351 / 14 - VIBRATORY PLATES NON-REVERSIBLE - PRACTIC
Weight kg 85
Frequency Hz 81
Centrifugal force kN 14
Max. speed m/min 25
Length x width compact. plate mm 350 x 550
Engine HONDA Type GX 120
Rated engine power @ RPM kW 2,9/3600
VD 451 / 18 - VIBRATORY PLATES NON-REVERSIBLE - PRACTIC
Weight kg 100
Frequency Hz 81
Centrifugal force kN 18
Max. rychlost m/min 30
Length x width compact. plate mm 450 x 550
Engine HONDA Type GX 160
Rated engine power @ RPM kW 3,9/3429
VD 501 / 20 - VIBRATORY PLATES NON-REVERSIBLE - PRACTIC
Weight kg 110
Frequency Hz 81
Centrifugal force kN 20
Max. speed m/min 25
Length x width compact. plate mm 500 x 550
Engine HONDA Type GX 160
Rated engine power @ RPM kW 4,0/3600
|
|
VD 350 / 16 - VIBRATORY PLATES NON-REVERSIBLE - CLASSIC
Weight kg 105
Frequency Hz 81
Centrifugal force kN 16
Max. speed m/min 25
Length x width compact. plate mm 350 x 550
Engine HONDA Type GX 120
Rated engine power @ RPM kW 2,9/3600
VD 450 / 18 - VIBRATORY PLATES NON-REVERSIBLE - CLASSIC
Weight kg 100
Frequency Hz 81
Centrifugal force kN 18
Max. speed m/min 25
Length x width compact. plate mm 450 x 550
Engine Honda Type GX 160
Rated engine power @ RPM kW 3,9/3600
VD 450 / 20 - VIBRATORY PLATES NON-REVERSIBLE - CLASSIC
Weight kg 120
Frequency Hz 81
Centrifugal force kN 20
Max. speed m/min 25
Length x width compact. plate mm 450 x 550
Engine Honda Type GX 160
Rated engine power @ RPM kW 3,9/3600
VD 450 / 22 - VIBRATORY PLATES NON-REVERSIBLE - CLASSIC
Weight kg 150
Frequency Hz 81
Centrifugal force kN 22
Max. speed m/min 25
Length x width compact. plate mm 450 x 550
Engine Honda Type GX 160
Rated engine power @ RPM kW 4,0/3600
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
