|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface
Comfortable non slip covering resistant for high traffic.
Environment: In wet or dry conditions for risk prevention and safety. Chemical characteristic: Elastomeric polyurethane complex poured onto a polyester rotproof non-weaved undercoating. Thickness: 2.1mm Granule: Non abrasive flexible granules 800µ Weight: 2.5kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 55
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 40% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 stuck application on surface M0 non insulating (LNE).
Classification building according to NF EN 14041 (LNE) CP1 S1.
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: Non abrasive flexible granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 65
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 20% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface.
Non slip covering flexible, comfortable and conformable.
Environment: In wet or dry conditions for risk prevention and security. Chemical characteristic: Elastomeric polyurethane complex very flexible. Thickness: 1.6mm Granule: Non abrasive flexible granules 200µ Weight: 2.4kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 66
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 11.5daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Extention = 75% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 in application glued on surface M0 non insulating (LNE).
|
|
|
80% of dirt and moisture is tracked into buildings on the soles of visitors’ shoes. Nomad™ Entrance matting by 3M is designed to stop it at the door, maintaining a clean welcoming entrance. It reduces accidents from slips and trips too, protects your floors from avoidable wear and tear, and plays a vital role in reducing cleaning and maintenance costs. Durable and easy to clean, our entrance matting comes in a wide range of attractive designs to complement your interior décor.
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: abrasive granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 105
Coefficient on wet ground : 80
Classification R13 to standard DIN 51 130
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 4% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
Transit Rubber flooring is highly slip retardant and can mitigate the risks of slips and falls in high traffic areas. It is recommended for floor coverings in areas such as ramps, restrooms and concourses. Due to its soft rubber base it acts like anti-fatigue flooring, making it the ideal choice for the transit industry.
Transit Rubber flooring requires less maintenance than most other flooring hard surface floorings and carpets. It is scratch resistant and can be cleaned easily with widely available cleaners. There is no need for waxing polishing or scrubbing. Transit Rubber flooring is available in a wide range of colors and designs to make sure that your surroundings look just the way you want them. We also give our customers the options of ordering custom colors thereby providing them with the opportunity of total satisfaction.
|
|
Two-component reference resin (100% dry extract, no solvent, no odour): variable thickness and numerous finishes possible depending on your specifications.
High resistance (performance classification No. RT00-072 by the CSTB) to traffic, to abrasion and to chemical products ("sealed" floors). High adherence of epoxy.
For heavy duty flooring indoors (or outdoors with an application of Topcolor) made of concrete or with an old epoxy resin coating:
- easy application (two roller-applied coats recommended),
- or applied by our technicians for many different thicknesses and finishes.
1 coat of Neopox = 4 coats of conventional floor paint.
|
|
TBS, for an increased security of the passages pedestrians on blade of terrace wood in moist environment or dryness. According to the measurement of comparative roughness of a Essai surface to pendulum SRT normalizes NF P 98831-4. Value of coefficient of friction in moist environment: 38 for a wood in IPE grooved against 61 for the TBS 21.
Coating TBS brings a durable solution and effective on the floorings wood in natural environments (footbridges of crossing, let us bridge, slopes, terraces)
A preventive solution adapted for pedestrian installations with great traffic.
A recommendation intended for the ERP and roadway systems, local government agencies, Architects and Study Bureau.
|
|
Flexible polyurethane resin
Two-component polyurethane resin (100% dry extract, no solvent, no odour) recommended for the food industry, hospitals and clinics, offices and civil administrations.
Flexible and comfortable to use with a very high resistance to scratches, shocks and dilute acids: ideal for industrial, professional or pedestrian traffic.
For flooring indoors (or outdoors with an application of Topcolour) on untreated or coated concrete (epoxy, polyurethane) old or porous floor tiles, asphalt or tar.
Application (maximum 2 mm thick) applied with a roller or serrated spreader for a self-smoothing coat.
|
|
100% solids (no volatile organic compounds) self-leveling floor coating that can be applied to smooth or mildly spalled concrete, producing an extremely durable and attractive chemical-resistant finish.
KEY FEATURES
* Silica aggregate can be added to rebuild floors that need a “high build” coating of 1/8” or greater
* Safe-T-Grit 300 or Anti-Skid Silica (food grade) can be added to the mixture to provide a non-skid surface
* Acceptable for use in meat and poultry plants
|
|
| ... products without technical information |
| |
|
|
|
|
Arrowhead Ceramic Pulley Lagging Arrowhead ceramic pulley lagging provides the solution when conventional rubber lagging fails to correct belt slippage and wears prematurely. Our unique Arrowhead ceramic is designed for the highest drive factors unlike the conventional square tiles.
- MSHA approved for mine use- meets all requirements for flame resistant solid products taken into mines. Acceptance Marking No. MSHA IC -174/2
- Increase Productivity – by delivering increased traction between the belt and pulley, allows for lower belt tension than with rubber lagging.
- Improved Belt Tracking – due to the Arrowhead patterns self-cleaning ability, which reduces material build up and thereby eliminates the major source of misalignment.
- Bonding Strength – that is superior to others, due to 3mm of our neoprene compound vulcanized into bottom-side of the lagging.
- Superior Wear - ability in abrasive or highly wet or dry applications as seen in below ground and above ground mining.
- Easy Installation – can be done in place, on plant site, at your local distributor or at the pulley manufacturer. Each strip is 10” (250mm) wide x pulley face (see chart).
|
|
Flex-Lag® Weld-On Ceramic
Eliminate the belt vibration and cleaner chatter often caused by ordinary weld-on lagging by installing Flex-Lag® Weld-OnCeramic Pulley Lagging. It features a new gutterless design with easily installed over-lapping segments. So the wide gaps between strips of conventional weld-on lagging products are eliminated.
Flex-Lag® Ceramic
When conventional rubber lagging fails to correct belt slippage, the solution is Flex-Lag® Ceramic Tile Lagging. Our Ceramic Tile Lagging features the highest coefficient of friction available in lagging materials - two to three times the friction of rubber in wet, muddy or dry conditions.
|
|
|
|
|
|
Flexco makes it easy to find the pulley lagging you need to eliminate belt slippage, increase pulley life, improve water shedding, and boost productivity. Plus, these benefits are achieved without removing the pulley form your conveyor system! Flex-Lag® application requires only a time- and labor-saving cold vulcanization process. So it installs easily on-site.
Flex-Lag® Diamond-Pattern Rubber Lagging is a high-durometer rubber for abrasion resistance and water-shedding. Based on the design of treads used for rain tires, the diamond pattern splits the film of water and deflects it into lateral or diamond-shaped grooves - away from the pulleys. A high coefficient of friction, combined with exceptional water-shedding capabilities, helps keep belt slippage to the absolute minimum.
Flex-Lag® Plain-Pattern Lagging helps prevent belt slippage in the dirtiest environments. Rubber flexes during use, shedding excess material, preventing build-up, and preventing premature belt and pulley wear. Horizontal grooves between plain rubber strips trap and deflect water from the pulleys. This results in a coefficient of friction vastly superior to plain sheet-type lagging.
Flex-Lag® Light-Duty Lagging is ideal for compact pulleys and most light-duty applications. Specially designed for pulleys having diameters as small as 2" (50mm). Moisture is channeled between small raised buttons that support and grip the belt, delivering the extra traction to drive your belt.
|
|
|
|
see the results for the following category : 
