|
|
|
80% of dirt and moisture is tracked into buildings on the soles of visitors’ shoes. Nomad™ Entrance matting by 3M is designed to stop it at the door, maintaining a clean welcoming entrance. It reduces accidents from slips and trips too, protects your floors from avoidable wear and tear, and plays a vital role in reducing cleaning and maintenance costs. Durable and easy to clean, our entrance matting comes in a wide range of attractive designs to complement your interior décor.
|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface
Comfortable non slip covering resistant for high traffic.
Environment: In wet or dry conditions for risk prevention and safety. Chemical characteristic: Elastomeric polyurethane complex poured onto a polyester rotproof non-weaved undercoating. Thickness: 2.1mm Granule: Non abrasive flexible granules 800µ Weight: 2.5kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 55
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 40% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 stuck application on surface M0 non insulating (LNE).
Classification building according to NF EN 14041 (LNE) CP1 S1.
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: abrasive granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 105
Coefficient on wet ground : 80
Classification R13 to standard DIN 51 130
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 4% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface.
Non slip covering flexible, comfortable and conformable.
Environment: In wet or dry conditions for risk prevention and security. Chemical characteristic: Elastomeric polyurethane complex very flexible. Thickness: 1.6mm Granule: Non abrasive flexible granules 200µ Weight: 2.4kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 66
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 11.5daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Extention = 75% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 in application glued on surface M0 non insulating (LNE).
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: Non abrasive flexible granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 65
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 20% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
Transit Rubber flooring is highly slip retardant and can mitigate the risks of slips and falls in high traffic areas. It is recommended for floor coverings in areas such as ramps, restrooms and concourses. Due to its soft rubber base it acts like anti-fatigue flooring, making it the ideal choice for the transit industry.
Transit Rubber flooring requires less maintenance than most other flooring hard surface floorings and carpets. It is scratch resistant and can be cleaned easily with widely available cleaners. There is no need for waxing polishing or scrubbing. Transit Rubber flooring is available in a wide range of colors and designs to make sure that your surroundings look just the way you want them. We also give our customers the options of ordering custom colors thereby providing them with the opportunity of total satisfaction.
|
|
Two-component reference resin (100% dry extract, no solvent, no odour): variable thickness and numerous finishes possible depending on your specifications.
High resistance (performance classification No. RT00-072 by the CSTB) to traffic, to abrasion and to chemical products ("sealed" floors). High adherence of epoxy.
For heavy duty flooring indoors (or outdoors with an application of Topcolor) made of concrete or with an old epoxy resin coating:
- easy application (two roller-applied coats recommended),
- or applied by our technicians for many different thicknesses and finishes.
1 coat of Neopox = 4 coats of conventional floor paint.
|
|
TBS, for an increased security of the passages pedestrians on blade of terrace wood in moist environment or dryness. According to the measurement of comparative roughness of a Essai surface to pendulum SRT normalizes NF P 98831-4. Value of coefficient of friction in moist environment: 38 for a wood in IPE grooved against 61 for the TBS 21.
Coating TBS brings a durable solution and effective on the floorings wood in natural environments (footbridges of crossing, let us bridge, slopes, terraces)
A preventive solution adapted for pedestrian installations with great traffic.
A recommendation intended for the ERP and roadway systems, local government agencies, Architects and Study Bureau.
|
|
Flexible polyurethane resin
Two-component polyurethane resin (100% dry extract, no solvent, no odour) recommended for the food industry, hospitals and clinics, offices and civil administrations.
Flexible and comfortable to use with a very high resistance to scratches, shocks and dilute acids: ideal for industrial, professional or pedestrian traffic.
For flooring indoors (or outdoors with an application of Topcolour) on untreated or coated concrete (epoxy, polyurethane) old or porous floor tiles, asphalt or tar.
Application (maximum 2 mm thick) applied with a roller or serrated spreader for a self-smoothing coat.
|
|
100% solids (no volatile organic compounds) self-leveling floor coating that can be applied to smooth or mildly spalled concrete, producing an extremely durable and attractive chemical-resistant finish.
KEY FEATURES
* Silica aggregate can be added to rebuild floors that need a “high build” coating of 1/8” or greater
* Safe-T-Grit 300 or Anti-Skid Silica (food grade) can be added to the mixture to provide a non-skid surface
* Acceptable for use in meat and poultry plants
|
|
| ... products without technical information |
| |
|
|
|
|
Advantages of PPC's Ion-Beam-Sputtered (IBS) Dielectric Thin Films
--------------------------------------------------------------------------------
Durable, dielectric thin films are easy to clean and chemically resistant
Dense, non-porous structure is insensitive to moisture
Low scatter and absorption losses result in high-damage thresholds
Repeatable, highly controlled process for precise layer control
--------------------------------------------------------------------------------
At PPC, we use ion-beam sputtering (IBS) technology because IBS is a repeatable and controllable process that results in dense, durable, high-damage-threshold thin films. Since the materials are directly sputtered onto the substrate, the process can be precisely controlled and easily automated so that films can be deposited with extremely high accuracy and repeatability.
Unlike conventional evaporative and ion-assisted films that have porous microstructures, IBS films have extremely densely packed structures that make them impervious to water vapor, resulting in an insensitivity to changes in heat and humidity, even in a vacuum environment.
Types of coatings that PPC does every day on standard or customer-supplied substrates:
High reflectors
Anti-reflection (ARs)
Beamsplitters
Polarizers
Partial reflectors
Dichroic mirrors
Non-polarizers
Low dispersion
Broadband dielectric
|
|
|
OptoSigma supplies a wide selection of optical thin film coatings. These coatings are often provided as part of the optical component but they may also be ordered separately to be applied to an uncoated element. For example, it is possible to apply an Anti-Reflection coating to any uncoated lenses, windows or optical fibers. Also reflecting coatings may be applied to uncoated substrates to form mirrors or partial reflectors. To make this process simple we have listed some of our most common standard coatings. To order you simply append the coating suffix to the base part number and specify the surfaces to be coated. If you don't find the exact coating you need please ask us to provide you with a custom solution. Our coating engineers will use the latest design software and production techniques to provide you with the coating you require.
|
|
|
|
|
|
Thin film coating is a vacuum deposition procedure used to enhance the transmissive properties of an optical surface. The most common types of dielectric coatings are anti-reflection and high reflection coatings, but beam-splitter, band pass filter, edge filter, and polarizing coatings are also available. Because thin film coatings are more durable than optical glass, coatings also help protect an optic surface from scratches and the environment.
Optimax produces optics up to 300mm in diameter with a wide variety of narrow and broadband anti-reflection coatings including doublet interface coatings. Both metal and dielectric mirror coatings are also available. For custom coatings, we utilize TFCalc thin film design software. Please see the reverse side for sample reflectance curves.
Optimax performs test runs of all coatings before beginning production to ensure a good design. We use a Perkin-Elmer Lambda 900 Spectrophotometer to check the performance of the coating upon completion. Adhesion, abrasion, and humidity tests are available to verify coating durability in accordance with sections of MIL-C-675C, MIL-C-48497A, and MIL-C-13508C specifications. Laser damage testing is also available upon customer request.
|
|
|
Optida Co offers various types of AR, HR, PR, filter or polarizing coatings. The coating could be provided on customer substrates or our own.
|
|
Standard Specifications
Diameter: 0.995" +/- 0.005"
Thickness: 0.030" & 0.020" +/- 0.005"
Surface Quality: 60/40 S & D
Surface Accuracy: 1/4 over 85% clear aperture
Edge Bevel: 0.010" Maximum @ 45°
P2S: High Polish two sides
Quantity: Volume Discounts available
Custom: VPG manufactures custom witness/diffusers with varying thickness, dimensions, materials, flatness and surface finish. Call for pricing on your special requirements.
|
|
he offered HALIDES are useful as starting materials for production by thermal evaporation of transparent thin-film interference coatings, which improve the optical characteristics of workpieces made of glass, quartz, single crystals, semiconductors, etc.
Used for deposition of mono- and multilayer optical coatings, they are effective in ultraviolet, visible and infrared spectral regions. Halides, fluorides in particular, is the most early class of film-forming materials, used as one of the first as thin-film dielectric antireflecting coatings in optics.
|
|
| ... products without technical information |
| |
OKS 2531
Alu-Metallic
Decorative corrosion protection based on aluminium powder for ferrous metals. For touching up hot-galvanised surfaces. Can be welded through. Fast-drying. Abrasion-resistant. Protects vehicle exhaust systems. Optimal when combined with OKS 2511.
|
|
| ... products without technical information |
| |
APPLICATION
Coating Thickness Analyzer is a tool for precise and accurate XRF measurement of various metallic and non-metallic coatings thickness (anticorrosive, insulating, antioxidizing, waterproof, pipe coating, etc.). Base/coating components are elements from Mg to U. System is applicable for control and monitoring of industrial processes.
FEATURES
- Automatic choice of coating thickness evaluation method for optimization of relative error of measurements,
- Remote control of analyzer electronics and software by ETHERNET interface from Workstation Device and communications with OPC server,
very simple and convenient operation and service,
- Possibility to install the measurement block under and above the measured material,
- built-in industrial computer.
For additional information, please contact us: XRF@bruker-baltic.lv
|
|
|
|
|
|
Years of development and attention to customer needs have made Thermo Scientific Niton alloy analyzers the first choice in XRF technology, bringing lab-quality elemental analysis wherever it is needed in a field-hardened package. Now, in addition to superior positive grade identification and composition analysis of alloy/metal coatings and substrates, the Niton® XL3t offers the benefit of our coating thickness/coating weight measurement technology - providing an "out-of-the-box" nondestructive solution for gauging the effectiveness of coating and plating systems.
Fast and easy-to-use, the Niton XL3t 800 not only performs at line and plating bath solution analysis, but provides more accurate measurements than non-XRF technologies such as eddy current, magnetic induction, and Beta backscatter. You get precise, nondestructive multilayer coating thickness results in seconds. Testing at the plating line both increases productivity and improves process efficiency - no more over-coating or under-coating. What's more, the Niton XL3t is your answer to measuring large or irregularly shaped samples, as well as small-diameter wiring or tubing. Cutting samples for benchtop analysis are a thing of the past.
Typical applications are:
-Galvanized zinc over steel
-Zinc or zinc alloy over steel
-Hard chrome over steel
-Electroless nickel over steel
-Chrome/nickel/copper over steel, Zamak™ or plastic
-DACROMET™ coating over steel
|
|
|
|
|
|
Government regulations, increased public awareness, and legal action have driven the need for lead paint testing. From the world's pioneer in handheld XRF instruments, Thermo Scientific Niton analyzers are still leading the way with unparalleled performance for residential lead paint inspection...fast, easy to use, reliable. Beyond lead paint testing, Niton® analyzers can measure dust wipes, soil samples, and air filters, helping lead professionals meet and exceed public health initiatives. What's more, they address the safe work practices required in many commercial/industrial structures as well as demonstrated proficiency in the ELPAT Program. For measuring lead paint levels, handheld Thermo Scientific Niton XRF analyzers are simply superior.
-Every Niton XRF analyzer contains an environmentally sealed housing for real world use – dust, dirt, and moisture don't impact reliability
-Every Niton XRF analyzer is capable of providing the fastest paint testing results at the highest statistical confidence in the industry.
-Every Niton XRF analyzer offers factory-trained service worldwide in more than 75 countries
-Every Niton XRF analyzer supplies at least 8 hours of battery life, with a free spare — we know your day doesn't always end after 8 hours; your Niton XRF analyzer won't quit either
-Every Niton XRF analyzer offers complete data encryption: your data is never vulnerable to accidental or malicious tampering
-Every Niton XRF analyzer provides fast, secure data downloads, with the spectral fingerprinting that today's juries have come to expect legally defensible data
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
