|
|
|
TopSolid’Wire is a fully integrated software solution which pilots wire electro-erosion machines. TopSolid’Wire principally serves companies which make tools, whether molds for the plastics industry or cutting tools. In addition to cutting in 2D, TopSolid’Wire directly creates tool paths for 3D parts defined with a solid modeller. TopSolid’Wire can work with all parts in 2 axes, 2 axes and angle and 4 axes.
|
|
FeatureWIRE
Drawing
Gear and Cam Wizards
In addition to standard drawing tools, FeatureWIRE includes wizards that allow you to create industry-standard gears and cams by simply specifying the design parameters.
CREATING FeatureWIRE FEATURES
FeatureWIRE includes the following features for part creation.
Dies - Creates dies for stamping or female metal parts, with no-core cutting supported
Punches - Creates punches for stamping or male metal parts
Sides - Creates parts with open curves
User Definable Features
|
|
GibbsCAM Wire-EDM
Designed to handle the most demanding Wire-EDM programs while being easy-to-use, GibbsCAM Wire-EDM supports programming 2- thru 4-axis CNC Wire-EDM machines. With a very flexible and robust graphical user, novice users will find the system easy to understand and learn, while experienced users will find it a straightforward, efficient way to access its breadth of capability and options. GibbsCAM Wire-EDM provides the user with complete control over the Wire-EDM machining operations. Post processors for all major brands of Wire-EDM machines are included.
2-axis and 4-axis Support
Wire-EDM machining represents an expanding segment of manufacturing with continual improvements in technology and machine tools. GibbsCAM Wire-EDM provides full support for 2-axis parallel or tapered with or without lands and 4-axis tapered machining with automatic 4-axis synchronization. Full associativity with geometry allows for easy updating to accommodate changes. With full control over all aspects of machining, you can fully optimize your part production while ensuring high quality results.
Machine Configuration
Today's Wire-EDM machines come in a wide variety of configurations, but there are key parameters and characteristics across all of them. GibbsCAM Wire-EDM allows you to fully define the physical and operating characteristics of your Wire-EDM machine tool, wire and stock to use in programming your parts. Standardized settings can be stored and recalled ensuring consistency between jobs.
|
|
ESPRIT SolidWire™ CAM Software
Accuracy and Predictability
Whether you use your wire EDM machine for small lots of sub-micron precision parts or as a workhorse for production machining, get the most out of your machine tool investment. Dramatically simplify the part-programming process, significantly increase part accuracy, and greatly reduce the length and complexity of your G-code program with ESPRIT.
Complete Machine Control
ESPRIT provides a universal EDM contouring cycle to machine any contoured mold, die, core, cavity, shape or profile. This versatile machining cycle supports any number of straight or tapered rough and skim cuts while optimizing wire cutting paths. Strategies for all styles of EDM machining such as punch, die, multi-cavity parts, and unattended machining are included. Between cuts ESPRIT automatically handles all the necessary wire-cut and wire-thread instructions, and part-handling functions of the machine: flushing, tank fill, and tank drain.
Advanced Tapering
Easily program the complex tapers common to mold components, forming dies, and cutting tools with the advanced conics capability of ESPRIT’s contour cycle. When cutting a radius during tapering, built-in advanced conics allows you to alternate between cylindrical constant radius corners and conical constant taper corners. ESPRIT also provides independent programmable upper and lower radius control. While tapering into sharp corners, ESPRIT offers you the flexibility to maintain sharp corners top and bottom or machine a blended radius on the secondary plane.
|
|
PartMaker Wire EDM is an intuitive solution for programming your Wire EDM. The software supports 2-axis, 2-axis with taper and full 4-axis Wire EDM cutting. PartMaker Wire EDM uses Knowledge Based Machining technology to store information about various wires, materials and cutting strategies for passes involving both rough and skim cuts.
The software allows you to assign your machining strategies to part geometry by just pointing and clicking. Tapers can be adjusted with just the click of the mouse. PartMaker Wire EDM provides an accurate time study for your EDM parts and allows you to simulate cutting in dynamic 3D graphics on screen.
PartMaker Wire EDM supports most Wire EDM machines currently available including models from manufacturers such as Mitsubishi, Sodick, Charmilles and others.
|
|
|
Mastercam is the most commonly used CAM software worldwide* and remains the program of choice among CNC programmers. Mastercam X2 is the next generation of our popular program, delivering the most comprehensive Wire EDM package with a new simplified, customizable interface, more power, and even faster, robust toolpath calculations.
|
|
Pizzato Elettrica has designed and patented new accessories to install the rope of safety switches faster and to obtain an aesthetically more pleasant system.
The new accessories, in comparison with the traditional fixing system through carpentry material, have the following advantages:
%u2022 The installation is faster because only one screw is used for the fastening of every rope extremity, and the parts are prepared to ease the installation. Some practical tests have pointed out that the installation time is halved, reason for which it is named FAST.
%u2022 The system is aesthetically pleasant, because thread parts (which sometimes tear operators%u2019 dresses) and the rope extremities, usually fixed by heat-shrinkable sheath or adhesive tape, have been hidden.
%u2022 The red plastic covers of the fixing parts have been developed also for the function of controlling the rope clamping. If the rope fastening screw is not fixed tightly enough, the cover cannot pass.
%u2022 The rope is fixed without folds, thus reducing the rope stabilisation time and the possible re-calibrations of the rope tightening.
Furthermore two sturdy pulleys has been introduced in applications where the rope is very long in order to support the rope length or to bend its route. They are designed to avoid any deformation and to allow the rope to remain in its seat also when it is energetically activated.
|
|
GLS Rope Switch
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
Guardian Line GLS features:
Die Cast Yellow Painted enclosure
IP 67 for hosedown.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 80 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
E-Stop Mushroom type button fitted.
Explosion-proof version available
|
|
GLM Rope Switch
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
Guardian Line GLM features:
Die Cast Yellow Painted enclosure
IP 67 for hosedown.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 50 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
E-Stop Mushroom type button fitted.
|
|
GLH Rope Switch
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
Guardian Line GLH features:
Die Cast Yellow Painted enclosure
IP 67 for hosedown.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 250 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
E-Stop Mushroom type button fitted.
Explosion-proof version available
|
|
Pull-wire emergency stop switches are mounted on machines and sections of plants which cannot be protected by guards. In contrast to mushroom head Emergency Stop push buttons, on pull-wire switches the Emergency Stop command can be initiated from any point on the wire.
In combination with one of the AES and AZR range safety monitoring modules, see chapter 10.3, ZS range pull-wire emergency stop switches can be used for Control Category 3 or 4 to EN 954-1.
Design and mode of operation:
All of the pull-wire emergency stop switches conform to European Standard EN 418. They have a positive linkage between the NC contacts and the wire rope. The pull-wire emergency stop switches are brought into the operational condition by pre-tensioning the wire, i.e. the NC contacts are then closed and the NO contacts open.
Schmersal make both standard and AS-i Safety at Work pull-wire emergency stop switches.
Click here to see the AS-i models
Or for the standard models click below
|
|
Stainless Steel Rope Switches
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
GLS-SS features:
Hygienic stainless steel 316 enclosure.
All screws and external/internal fittings stainless steel.
IP 67 - Ideal for food industry applications.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 100 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
Optional Extra E-Stop Mushroom type button available.
Explosion-proof version available
|
|
Emergency pull-wire switches
ZS 80
Metal enclosure
4 contacts
Position indicator and integrated emergency-stop push button
Wire length up to 75 m
Pretensioning force 100 N
Lever for release and position indication
Watertight collar
Wire pull and breakage function
Indicator lamp available
|
|
| ... products without technical information |
| |
|
Designers and engineers are discovering new applications for hydraulic power. Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has a hose to meet the diverse needs of our customers, because Goodyear provides hose products that meet all major global hose standards. Produced to ISO 9001 certification, Goodyear's hydraulic hoses undergo state-of-the-art manufacturing processes and meet the applied international standards of SAE J517, EN 853, EN 854, EN 855, EN 857, and DIN 20023.
|
|
| ... products without technical information |
| |
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
RAD-CON is the premier choice for Cold-Heading Quality wire producers. The 100% Hydrogen Super-High Convection™ system along with the AC/APEx™ atmosphere control system increase productivity while lowering operating costs. These innovative and proven technologies coupled with economical solutions to customers’ applications make RAD-CON the preferred brand for CHQ.
RAD-CON also services other steel wire processors. RAD-CON designs the best possible solution for specific annealing requirements based upon the customers’ needs. Providing 100% hydrogen systems, nitrogen systems, direct-fired furnaces or radiant-tubes, RAD-CON has a design for any situation.
|
|
Le macchine SEIT per il settore elettronico ed elettromeccanico consentono numerose lavorazioni. Scegli tra i seguenti campi di applicazione quello più adatto alle tue esigenze:
1.Bobine
2.Cavi
3.Connettori
4.Contatti
5.Sensori, motorini e componenti elettromeccanici vari
6.Schede e componenti elettronici vari
|
|
|
Heating line for wire hardening and tempering (oil hardening and tempering). Output of 2000 Kg/h with ø 15mm wire. It consists of three induction heaters: 400 Kw, 6 Khz; 150 Kw, 40 Khz; 300 Kw, 6 Khz.
|
|
| ... products without technical information |
| |
Pneumatic rope balancers for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 75 kg
Max work radius 3 m
Rotation 360°
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Jib cranes or light crane bridge or monorails systems, complete with metal supporting frame, delivered as a turn key project
|
|
Pneumatic rope balancer with pneumatically operated permanent magnet handling attachment. Particularly indicated for handling of steel part having both flat or round surface. Safety device allowing the automatic connection of the load balancing function only if the part is gripped.
Max capacity 80 kg.
Also suitable in execution for manipulator with capacities up to 250 kg or more, to be used also with tilting or turning devices.
|
|
Pivot arm KSL-L/-M
Pivot arms type KSL-medium and KSL-light are combined with Demag rope balancers or Demag SpeedHoists which are fitted above the pillar. Therefore, they offer the operator highly convenient, smooth and flexible load handling, as only the relatively low dead weight of the arm has to be moved.
They are available with load capacities of up to 160 kg and, depending on the design, an outreach of up to 5,000 mm.
|
|
| ... products without technical information |
| |
Designed specifically for the wire and cable industry, the SwiftMark sets a new standard in labeling efficiency. The SwiftMark automatic label printer and applicator prints self-laminating vinyl labels and applies them to various sizes of wire and cable, increasing labeling productivity up to 400%. With a cycle time of just over 4 seconds, the SwiftMark can print and apply labels in a fraction of the time required to manually print and apply labels which increases productivity and reduces labeling errors, while providing the highest printing and application quality. Too see the SwiftMark in action please watch our video.
Labels can be quickly and easily designed in the accompanying Tagprint Pro software, and label files can be downloaded and stored on the SwiftMark via a USB, Parallel port, or serial connection. Simply select the file and label quantity using the user-friendly touch screen, and labeling is as simple as placing the cable in the machine and pressing a button or foot pedal.
The SwiftMark has a simple interface which makes it very easy to use, yet it is capable of printing advanced label sequences such as label sets with different serial numbers and text on each label.
|
|
|
