|
|
GibbsCAM Machine Simulation
An extension to GibbsCAM’s integrated Cut Part Rendering visualization/verification capability, Machine Simulation uses animated machine tool models to identify any program errors before they cause costly mistakes on the shop floor. |
|
Eureka performs a complete 3D-simulation of machine tools through a simple and intuitive graphical interface and starting from the G-code.
Eureka helps to avoid risks of damaging expensive work pieces, breaking tools and fixtures or even crashing a CNC machine because of some programming error.
Thanks to the possibility of customizations at any level many important manufactures turned on Eureka as their own verification software and as a solution for their customers.
Eureka supports any machine and any controller on the market like: Heidenhain, Fanuc, Siemens, Num, OSAI, Z32, Heller. Other controller can be easily integrated on demand. |
|
Benefit Highlights
Efficient Post-Processor and Machine Model Development
The machine tool and controller data for both Virtual Machine and CAM-POST are stored and managed in the same database. This eliminates the error-prone and time-consuming alternative of entering the same data twice when using a non-integrated solution.
Cost-Effective NC Tape Proofing
Virtual Machine detects and corrects collisions between machine components, in real-time, during post-processing. As a result, Virtual Machine reduces scrap materials and minimizes tool replacements while increasing machine utilization and improving part quality.
Leverage Existing Technology
Virtual Machine works with existing NC post-processors generated by NC manufacturing experts utilizing CAM-POST. Subsequently, existing post-processors can be tested for errors and updated automatically within a single user interface.
Shortened Learning Curve for CAM-POST Users
Virtual Machine is integrated within the CAM-POST user interface; thereby, eliminating the need to learn two different products or applications. In addition, there is no need to learn a new CAD system, simply import the machine model geometry from any current CAD solution.
Machine Tool Motion Inspection
Virtual Machine may be synchronized with CAM-POST's interface at any collision or over-travel error; thereby, allowing the NC programmer to graphically examine the part program and tape output precisely where the problem occurred. With this powerful tool, errors that could have damaged the part, tool and fixture can be eliminated. |
|
NCSIMUL is a simulation software of complete machining, for the development, the optimization and the exploitation of programmes of machining for the machine tools with numerical control (MOCN).
NCSIMUL allows:
- reading and the decoding of programs of machining used by the controller of the machine tool, their visualization and their possible modification by a powerful graphic editor.
- the simulation of the movements of the machine tool according to its characteristics (dimensions, axes, races, correctors, type of cabinet of control) and of the program of machining.
- the simulation of the removal of the matter on the workpiece, starting from the crude, and the detailed checking of the part obtained, by dimensional inspection, calculation of sections, comparison to a theoretical model CAD.
- the optimization of the cutting conditions out of matter according to the Couples tools/matter and of the instantaneous conditions of machining (plunged, slotting, volume of the chip, acceptable power...).
- the edition of the courses tools thanks to functions advanced like the insertion or the removal of blocks CN, the rewriting of programs ISO (translator), etc
NCSIMUL is a software of the software continuation "Numerical Workshop" of SPRING TECHNOLOGIES" |
|
2D machining ranges from the very simple to the very complex. Mastercam delivers all the tools you need to maximize your time.
Fast, efficient bulk material removal is essential to efficient NC programming. A superior finish is crucial to any job. Mastercam gives you a variety of techniques suited to your specific projects.
Multiaxis machining adds an extra level of flexibility to your machining operations for a wide variety of projects ranging from high precision to free-flowing artistic cutting.
Watch your part being cut from a solid block of material with Mastercam's solid model toolpath verification. The tool and holder are checked and displayed during simulation. |
|
Fully associative geometry and toolpaths let you modify the geometry, tooling information or machining parameters and immediately get an accurate, updated toolpath.
Mastercam's "Quick Toolpaths" let you program parts completely with just a few simple clicks.
Mastercam's Operations Manager gives you a single place to create, modify and analyze all aspects of your toolpaths.
Store a library of commonly used operations to automate machining. For example, you can rough and finish a new part simply by importing one stored set of operations and applying them to a new model. |
|
Efficient Wireframe Geometry
- Multiple point and line creation techniques.
- Efficient arc, circle, and fillet functions, including filleting at every corner in a chain of entities.
- Create splines on surfaces using a variety of functions including surface projections, surface intersections, edge curves, slicing curves, and parting lines.
- Create pre-filleted shapes to save time. |
|
Fast efficient bulk material removal is essential to efficient NC programming. Mastercam gives you a variety of techniques to rough all your parts.
Rough cut multiple surfaces, solid models, or a combination of both.
Rough cut with constant Z contours or pockets.
Constant Z rough rest milling (remachining) identifies and machines areas that need to be machined with a smaller tool.
Automatic facing and critical depth recognition ensure that flat surfaces between Z cuts won't be left with too much stock during rough machining.
Automatically align all your roughing plunge points, making it easier to pre-drill those spots for production machining. |
|
| Mastercam is the most commonly used CAM software worldwide* and remains the program of choice among CNC programmers. Mastercam X2 is the next generation of our popular program, delivering the most comprehensive Wire EDM package with a new simplified, customizable interface, more power, and even faster, robust toolpath calculations. |
|
Full 2-Axis Programming
GibbsCAM Production Turning provides a full range of functionality for defining processes for efficiently machining 2-axis parts from wireframe geometry.
Graphical Tool Definition
GibbsCAM Production Turning's graphical user interface to define tools shows the user key dimensions to allow easy and error free tooling creation. The system supports wide variety of predefined tool types as well as user-defined form tools.
Start/End Point Control
With GibbsCAM Production Turning you have complete control over where you initially position the tool to start machining to where you finish machining. Approach extensions are automatically generated if the tool is started off the machined profile.
Advanced Roughing Routines
GibbsCAM Production Turning provides a full range of roughing routines such as turn roughing cycles for plunge roughing with automatic shoulder stroking, and pattern shift roughing with constant path and constant step over choices.
Material Awareness
GibbsCAM Production Turning maintains an awareness of remaining stock material allowing automatic calculation of entry/exit and toolpath moves to reduce programming time and eliminate air-cutting. Knowing where remaining stock is also allows the system to automatically define rapids which avoid material.
Tool Approach Control
With GibbsCAM Production Turning you can define toolpaths so the tool cuts in both forward and reverse directions or in one direction only. No tool dragging automatically calculates optimal cutting toolpaths, so the tool is always cutting in a forward insert direction.
Canned Cycle Support
GibbsCAM Production Turning provides support for a wide range of canned cycles, such as face, OD/ID and casting canned-cycles for roughing and finishing operations as well as most drill-type cycles.
Threading
GibbsCAM Production Turning includes a built-in library for all popular thread form data allowing threads to be quickly and accurately programmed. |
|
| PartMaker CAM Software for CNC Lathes uses visual representation of turning operations and cutting tool parameters to assure quicker learning. The task of lathe programming is made so simple that even novices can produce good programs in a matter of minutes. Once the desired operation is selected, a graphical representation of the tool motion and material removal is shown. |
|
| ... products without technical information |
| |
TURBOSOFT NT:
Powerful CAM System for the CNC programming of 5- & 6-axis milling applications on turbine blades, blisks, impellers and extruders.
- Airfoil specific geometry elements
- Roughing and finishing strategies directly applicable on geometry elements
- Automatic elimination of turbine blade specific critical milling operations such as hearts, flanks, platforms, plunging etc.
- Integrated Postprocessor with application specific cutting path optimization
- Automatic continous blank size adaption
- Operating System Windows NT
- Adaptive Milling & custom functions optional
TURBOSOFT plus:
Specialized CAM System for the CNC programming of 5-axis milling applications on airfoils.
- Airfoil specific geometry elements
- Roughing and finishing strategies directly applicable on geometry elements
- Automatic elimination of turbine blade specific critical milling operations such as hearts, flanks, platforms, plunging etc.
- Integrated Postprocessor with application specific cutting path optimization
- Automatic continous blank size adaption |
|
Our flatbed cutting machines rely on powerful software to make accurate and repeatable cuts in a wide range of demanding production environments.
Control software developed by Blackman and White in-house can be supplied with the machine. This software is extremely adaptable and can be modified quite simply by the end-user. Should special functions be required by the customer, the computer staff at Blackman and White can make the necessary modifications. |
|
Lantek Expert Cut is a CAD/CAM system specially designed for automating the programming of sheet metal cutting machines (oxycutting, plasma, laser and water jet).
Leaders in oxycutting and plasma
Lantek Expert cut optimises continuous cutting, automatically positions multi-torches and automatically calculates the most suitable remnants.
Established in laser and water jet
Lantek Expert Cut optimises cutting, avoiding passing over already cut holes, and manages different cut qualities. |
|
Lantek Expert Punch is a CAD/CAM system specially designed for automating the programming of CN punching machines.
Automatic and manual nesting with great flexibility and optimum performance.
Lantek Expert Punch improves the automatic loading and unloading of the sheets and automatic part removal.
It correctly manages Autoindex tools, Multitool stations and all types of tools for forming, embossing, drilling, threading, stamping, rolling, shearing, etc.
It enables micro-cuts to be automatically inserted in parts interwoven in the sheet. |
|
ARIANNA CNC supplied by Ficep represents the ultimate innovation among the control units for CNC machines used on simple 2 controlled axis machines up to more than 40 controlled axis machines.
ARIANNA is an extremely easy and intuitive software, thanks to the user-friendliness of Windows and to the graphics which has been dedicated exclusively for the steel construction, ARIANNA can be easily used even by inexperienced users.
The set-up through visual windows is really effective and errorproof.
The programming of nesting and multing for drilled plates and for steel construction beams is extremely simple and intelligible.
The M.M.I (Man Machine Interface) ARIANNA is the same on all Ficep CNC machines, this enables operators and maintenance people of a steel construction workshop where machines of different type are installed, to understand the use and programming independently from the typology of the machines.
Moreover it is understood that ARIANNA can be interfaced with the most modern CAD systems (Structural Steel CAD 3D) for the steel construction industry, such as BOCAD, X-STEEL, STRUCAD, SCIA, DESIGNDATA, PROSTEEL, etc.
Furthermore, thanks to the CAM (Computer Aided Manufacturing) and MIS (ultimate Management Information System for steelwork fabricators) software packages supplied by our sister-company STEEL PROJECTS, the software ARIANNA can be interfaced with CAD such as AUTOCAD importing formats like DXF and DWG, apart from the most recognized format DSTV (Deutscher Stahlbau-Verband). |
|
| MDSI's feature product, OpenCNC® software, is a production-proven, unbundled, software CNC control built on an open architecture. Open architecture enables manufacturers to integrate off-the-shelf hardware and software technologies to achieve flexible and agile world-class manufacturing. Unlike proprietary CNC controls, OpenCNC requires no proprietary hardware or motion control cards. Combining a soft CNC and soft PLC in a single application, OpenCNC is well suited for new equipment as well as machine control replacements. |
|
Features
- User Interface
Genesis uses the same user interface as other Radan 08 products. The screen below shows the interface and a typical sheet layout for the current part.
- Output
Machine set-up, tooling lists, nest graphics, part identification and most importantly the machine program are all automatically produced directly from the nest schedule.
- Automatic Nest Schedule
Automatic program creation following input into the nest schedule of part number / kit number, quantity required and priority to determine which components are the most urgent.
- Manual 'bump' nesting
The 'bump nesting module allows parts to be placed onto the sheet from a nesting schedule. Parts always jump to position nearest the cursor. Moving the cursor causes the parts to track around the shape of parts already on the sheet until the desired position is selected.
- Data Translation Wizard
The Data Translation Wizard automatically translates single or multiple DXF and DWG formats. |
|
Solution for laser cutting in 3D
SICUBE is a system which allows the automatic management of the laser cutting machines and water 5 jet and 6 axes continuously. With the assistance of SICAD you have the possibility of importing the files of the models in 3D and of possibly modifying them, or of creating the new ones. Models on which it will be possible to generate the course of cutting.
Thanks to a meticulous control of the surfaces and curves to be cut out, the system determines the procedures of starter of entry and of exit, the cutting head has perpendicular to the points course determining the skeletal rules of work by the user.
The program guarantees a course of cut free from risks thanks to an automatic module of check of the collisions. |
|
| ... products without technical information |
| |
|
|
