Mechanical vises

Max. clamping force: 20 kN
Stroke: 6 mm - 154 mm

CENTERING CLAMPS -Feature- -Self-Centering Vise -The jaws move toward the center. -This always provides stable workpiece centering settings. -Ideal for 5-axis machining. -Two Choices of Jaw Style- -Serrated jaws ...

Material:Body and jaw holder mild steel. Spindle high-strength special steel.Version:Body and jaw holder hardened and ground.Note for ordering:Supplied with hexagon crank handle. Order jaw plates separately.Note:Mechanically operated ...

Max. clamping force: 25, 40 kN

Description Double clamping vise with third hand function for easy and safe loading of several workpieces on tombstones. Field of application 3-axis standard machining centers 4-axis vertical machining centers 4-axis ...

Max. clamping force: 25, 50, 40 kN

Description The SCHUNK KONTEC KSC-F single-acting vises are perfectly suitable for equipping palletizing systems. Due to the modular system, the VERO-S interface and the 160° quick clamping, they can be adapted to new ...

Max. clamping force: 30 kN

Description KSM2 multi clamping vise with jw quick-change system for many small or large workpieces. Field of application 3-axis standard machining centers 4-axis vertical machining centers 4-axis horizontal machining ...

... workpiece 360° freely rotatable safe and quick locking via handle flat and stable construction inclusive fastening screws for vice Function attribute 1: - with pipe clamping jaws Material1: - special tool steel

Stroke: 100, 120, 180, 210 mm

... mounting screws for turntable induction hardened jaws and anvil double start trapezoidal thread for quick opening and closing vise forward opening ground jaws, anvil plate and slide corners special tool steel Function ...

Machinable collet for external clamping MATERIAL Clamp nut aluminium. Collet steel. VERSION Clamp nut hard anodised. NOTE The contour of the workpiece to be clamped is machined into the collet. By using the engraved degree ...

Machinable collets, square Material: Body aluminium. Wedges carbon steel. Version: Body natural colour anodised. Wedges black oxidised. Note: The lateral clamping screw tightens the jaws and clamps the workpiece on the circumference. The ...

Precision vices stainless steel, aluminium or brass, mini Material: Precision vice: stainless steel, aluminium or brass. Jaw plates: stainless steel or plastic Version: Aluminium matt anodised Brass matt chromed. Note: The ...

Max. clamping force: 14,000 N
Stroke: 0 mm - 120 mm

... King is now also available with continuous holding serration (full serration). Due to its favorable price, the popular 5-Axis Vise is mainly used in automated manufacturing in large quantities. Its intended use is exclusively ...

Max. clamping force: 20,000 N
Stroke: 125 mm

The Makro•Grip® 125 Rail 5-Axis Vise has a jaw width of 125 mm and holds workpieces up to 205 mm clamping range. The 5-Axis Vise can be mounted on the clamping bars of the quick clamping system with absolute ...

Max. clamping force: 6,000 N
Stroke: 0 mm - 65 mm

... •Grip® micro with jaw width 46 mm is a real space-saver. Equipped with only two clamping studs, the 5-Axis Vise is perfectly suited for multiple clamping of small components in limited space. The new ...

Max. clamping force: 40, 25 kN

... sides, that all guides and the spindle thread can be lubricated quickly and easily Horizontal, vertical or side mounting Vice with two movable clamping jaws and a stationary center jaw Steel basic body as well as ...

Max. clamping force: 30, 50, 60 kN

• Scope of delivery, complete with clamping wrench, workpiece stop and four clamping claws • With draw-down jaws • Hardened steel body (60 HRC) • Clamping repeatability 0.02 mm Einsatzbereich For universal use on milling machines ...

• Clamping system mechanical, manually operated. • Standard version. • Body made out of special steel casting • Low, stable design with thread spindle For securely clamping workpieces on drills and measuring machines. • ...

Max. clamping force: 18, 27, 37 kN
Stroke: 30, 50, 60, 150 mm

Clamping force blocks, manual, centric clamping Robust prepared for quick change Self-centering Clamping force up to 37.000 N Stroke up to 150 mm Version to blank the workpiece

Max. clamping force: 16 kN
Stroke: 20, 100 mm

Clamping force blocks, manual, centric clamping Compact from 80x90 mm Self-centering Clamping force 16.300 N stroke 20 and 100 mm Version to blank the workpiece

- Base plates as connection elements between clamping blocks and different types of machining tables - Base plates are available in 3 version with different characteristics, which offers addisitional advanteages to the users - Central ...

Max. clamping force: 25, 40, 21, 38 kN
Stroke: 35 mm - 116 mm

WS5.4600 Workholding Systems SCS clamping against the fixed jaw mechanically or hydraulically operated jaw widths 80 and 120 mm

Max. clamping force: 40, 50, 25 kN
Stroke: 309, 205, 225 mm

WS1.3020 Workholding Systems EL clamping against the fixed jaw jaw widths 100 | 125 | 160 mm

Max. clamping force: 25, 40, 50 kN
Stroke: 0 mm - 546 mm

WS1.3070 Workholding Systems NC clamping against the fixed jaw jaw widths 100 | 125 | 160 mm

Max. clamping force: 16 kN - 40 kN
Stroke: 100 mm - 800 mm

... most popular (and copied) vise in the world - The perfect mix: price, quality, versatility. All GERARDI vises and accessories are modular and components of all our vises will interchange ...

Max. clamping force: 16 kN - 40 kN
Stroke: 100 mm - 800 mm

The most advanced vise! Innovative comb system for manual quick pull-down jaw plate changes! The vises of the StandardFLEX series are an evolution of the Standard vise series. Their ...

Max. clamping force: 16 kN - 40 kN
Stroke: 290 mm - 1,000 mm

Vises with the extra large base dimension, much longer than STD vises. Space on the Machine table sometimes is tight, XL vises enable to have 2 vises in one because ...

Max. clamping force: 40 kN - 40 kN
Stroke: 62 mm - 443 mm

... without refitting. ground jaws for high precision in the machining of workpieces high-pressure spindle with mechanical power intensifier (operation with torque wrench) up to 40 kN clamping force (linearly ...

Stroke: 255 mm

... ) Rolled C45 clamping screw offering a better mechanical resistance than a machined screw Fixed jaw holder and mobile jaw holder > C45 Cataphoresis Hydraulic cylinder incorporated in the cam. The vice ...

Max. clamping force: 50,000 N
Stroke: 320 mm

... excellent vibration absorption ability, cast iron slide EN GJS 600-3, high mechanical characteristics, for intensive use Measurement setpoint on slide : Quick reading and adjustment of vice opening ...

Max. clamping force: 50,000 N
Stroke: 0 mm - 320 mm

... excellent vibration absorption ability, cast iron slide EN GJS 600-3, high mechanical characteristics, for intensive use Measurement setpoint on slide : Quick reading and adjustment of vice opening ...

Stroke: 0 mm - 180 mm

Rugged constructionEffectiveIn tool steel . Made of hardened tool steel . Hardenned and precision ground . Hardness: HRC58 Use : ControlEDMMillingGrinding Squareness : 0.005/100 mm Parallelism : 0.003/100 mm

Stroke: 0 mm - 150 mm

Rugged constructionEffectiveSureIn tool steel . Made of hardened tool steel . Hardenned and precision ground . Hardness: HRC58 Use : ControlEDMMillingGrinding Squareness : 0.002/100 mm Parallelism : 0.002/100 mm

Stroke: 0 mm - 100 mm

Rugged constructionEffectiveInnovativeSureIn stainless steel . Made of stainless steel . Hardenned and precision ground . Hardness: HRC58 Use : ControlEDMMillingGrinding Squareness : 0.002/100 mm Parallelism : 0.002/100 mm

Max. clamping force: 1,300 kgf

... machine ✅Compatible with Robotic Arms Detailed Information: https://www.homge.com.tw/five-axis-adjustable-self-centering-vise-asc-s ZERO POINT: https://www.homge.com.tw/zero-positioning-quick-change-devices

... and Hardened to achieve HRC 50, which makes vise clamp the workpieces easily and firmly. 3). Vise body is made of Ductile lron above FCD 60 grade and its slideways are hardened to HRC 50, which makes ...

Max. clamping force: max 8000.0 kgf
Stroke: 300, 350, 450, 500, 600 mm

Mechanical vise (powerful type) Shortest Length with Big Jaw Opening Extremely High Accuracy and Repeatability Special MULTI-POWER design enhances clamping force of 0~8000KG Suitable for Gantry-Type ...

Max. clamping force: 50,000, 40,000, 30,000, 16,000 N
Stroke: 19 mm - 114 mm

The self-centering vise-series MZR is used as a cost-effective clamping tool for clamping raw parts on multi-axis machining centres. With its compact, maximum access to the workpiece on multi-axis machining centers ...

Max. clamping force: 5,000 N - 70,000 N
Stroke: 12 mm - 178 mm

This centre-clamping vise series is used always when maximum centre and repetition precision are not necessary. It is especially designed for raw material clamping or on unmachined part machining on multi-axis machining ...

Max. clamping force: 70, 30, 40, 16, 50 kN
Stroke: 19 mm - 175 mm

The centre-clamping vise series MZU with reversible step jaws gives the user the highest level of flexibility on multi-axis machining centres. The tiered step jaws offer maximum accessibility, even for short cutting tools. ...

Stroke: 0 mm - 100 mm

... Unlike traditional vises the TriMax G clamps workpieces by means of traction clamping. The vise has one fixed jaw and one moving jaw that moves on hardened and ground shafts, allowing for quicker and ...

TriMax T Series of vises is a complete multi-part clamping system that reduces downtime and maximizes machine tool capacity. Made to clamp up to four workpieces at a time, multiple movable jaw sets can ...

Stroke: 90 mm

TriMax T Series of vises is a complete multi-part clamping system that reduces downtime and maximizes machine tool capacity. Made to clamp up to four workpieces at a time, multiple movable jaw sets can ...

Max. clamping force: 4,000 N - 50,000 N

HIGH CAPACITY VICE up to 280 mm with no limitation with divided vice COMPACT several vices can be used together for multiple clamping HIGH CLAMPING POWER up to 22 ...

Max. clamping force: 22,000 N

DIVIDED VICE CAPACITY adapts to workpiece dimensions INCLUDING 2 Base plates : 09-016 height 28 mm 1 moveable indexable jaw : 09-025 clamping range 16 mm 1 fixed indexable jaw : 09-080 width 60 mm

Max. clamping force: 32, 43, 45 kN

... horizontally. * Standard sizes of vice tables allow multiple alignment in the machine table.in this way, it saves time in mass production and it allows to tighten long work pieces safely. * Thanks ...

... the possibility to process the workpiece. * The entire body of the vices is made of special alloy steel. it is resistant to wear and tear. * All working surfaces of the vice are sensitive and stoned ...

Max. clamping force: 0 kN - 20 kN

... precision multi-series lashing vices, allows multiple workpieces to be processed. * The entire body of the vices is made of special alloy steel. it is resistant to wear and tear. * All working surfaces ...

Max. clamping force: 5,200, 229 N
Stroke: 10, 5 mm

SELF-CENTRING VISE WITH MECHANICAL OPENING DRIVE AND SPRING CLOSING Light working precision chuck easy to put on the machinery. Used on working and assembly machinery tain number of chucks is required. ...

... extra-high shaped, as a result large clamping depths possible · With measurement scale for fast presetting the clamping width · Vice opening to the front Further technical information: · Weight: 9.5kg · Hole distance: ...

... insert to the vise base 4 - set the required value of L = 0,2 (+/- 0.01 mm) by loosening the bolts (1) 5 - use the dial gauge to check the parallelism of the clamping insert to the vise base, the parallelism ...