|
|
Sprecher Automation provides primary technology and secondary systems for high voltage switchgears.
|
|
Manufactured from pre-galvanised 2mm sheet steel, with watershed top and front access door
Outdoor - IP43 degree of protection
Manual operation - IP2XB Operator protection in open and closed positions
Freestanding, transformer coupled or transformer mounted
Direct connection to the transformer LV terminations via 'F' type flange
800A, 1600A, 2000A or 2500A main busbar rating
Off-load manually operated incoming isolators to match busbar ratings (800A, 1600A, 2250A)
Maximum 6 TP&N IP2XB fully shielded outgoing fuseways
J type 92mm fuseways up to 800A
Moulded case circuit breakers (MCCB) up to 1250A
Air circuit breaker (ACB) up to 2500A
Generator connections available
Bottom cable entry
Cable glanding plates or cable support cleats
Single or multiple core mechanical clamp or compression cable termination options
Available in PME or SNE configuration
Fitted with a 13A socket
|
|
Outdoor Switchgear
We provide low and medium voltage switchgear for outdoor use. Our equipment is available newly manufactured or re-engineered.
Product overview
- Low voltage 415 volt products
Suitable for direct transformer mounting or free standing:
- Fused pillars
- Air circuit breakers & moulded case circuit breakers up to 4000 Amps
|
|
Since decades, Sprecher Automation has been developing LV switchgears and distribution boards for auxiliary services in power utilities as well as for power supply and distribution in various industries.
Sprecher LV switchgears guarantee easy expandability of existing equipment whereas expenditures are limited by the actual system extensions.
|
|
|
The CPA-AMC system consists of a series of air-insulated modular cubicles with metal-clad compartments and withdrawable module technology for Medium Voltage primary distribution and industrial installations up to 17.5 kV.
|
|
Sprecher Automation provides two MV switchgears (M1 and M2) which are based on a highly modular and flexibel standardised system. The switchgear components are provided by ELATEC. Sprecher Automation supplies project management, overall and detailed planning, assembly, final assembly and final inspection as well as testing. Beside the factory-assembled delivery, Sprecher also provides on-site installation, commissioning as well as service and maintenance by its own staff.
|
|
Rapier RX
The Rapier RX range incorporates a modular design switch that can be configured to suit a variety of applications. Combining high performance and reliability, the Rapier RX rocking type switch can be a key element in rural distribution networks.
Rapier GX
Based on the latest developments in SF6 switchgear technology, the GX combines high performance and reliability. The GX Load break Switch can be manually operated or motorised for sectionalising, automation and remote control to suit your network requirements.
Rapier DSB
The Rapier Double Side Break 'DSB' range provides a powerful and cost effective solution for isolating a series of circuits and equipment in substation applications. Based on open terminal air break technology, the Rapier DSB range combines robustness and alignment reliability.
|
|
|
The CPG.0 cubicle range of the CPG system consists of series of SF6 gas insulated modular cubicles, GIS-type, for primary distribution configurations in medium voltage networks up to 36 kV
|
|
The Scimitar range has been built to meet stringent requirements and is corrosion resistant for durable outdoor and indoor use.
The switches are contained within a common stainless steel SF6 filled tank with the fuses mounted in air above the gas chamber. Each fuse is sealed against external influences and locked into its own chamber upon insertion. The units can be extensible for direct connection to form multiple plan switchboards without the need to access the gas chambers or for extra cabling.
Features
Ratings up to 15.5kV
Common switching chamber with sealed SF6 environment
Low gas operating pressure
Fully extensible
Indoor and outdoor
Freestanding, transformer mounted or transformer connected
|
|
|
|
|
|
Fuse distribution cabinet free standing
Freestanding or transformer coupled to ENA TS 35-2 via 'F' type flange to BS2562
Complies with requirements of ENA TS 37-2
2.5mm pre-galvanised sheet steel enclosure with weatherproof watershed top and front access door
Corrosion protected with polyester stove enamelled textured paint finished in admiralty grey to BS 381C shade no. 623
Outdoor - IP43 degree of protection
Manual operation - IP2XB operator protection in open and closed positions
1600 or 2250A main busbar rating to match specified busbar ratings
Off-load manually operated incoming isolators
6 or 8 TP&N IP2XB fully shielded outgoing fuseways
Extensible to 14 TP&N fully shielded outing fuseways to IP2XB
J Type 92mm outgoing fuseways up to 800A
Moulded case circuit breakers (MCCB) up to 1250A
Air circuit breaker (ACB) up to 2000A
Generator connections available
Bottom cable entry
Cable glanding plates or cable support cleats
Single or multiple core mechanical clamp or compression cable termination options
Available in PME or SNE configuration
|
|
|
The CGMCOSMOS system is composed of a set of reduced size modular cubicles, single or multifunctional, for different secondary power distribution configurations up to 24kV in both public and industrial settings.
|
|
|
|
|
|
DHSG-1 switchgear cabinet for twin drives with total load currents of up to 300A
The DHSG-1 flameproof switchgear unit was developed for coal-industry applications, but can also be used in other explosive mining atmospheres.
The DHSG-1’s extremely compact dimensions make it highly suitable for performing switching and control tasks on mobile mining machinery, such as loaders and drill jumbos, as well as for the protection of three-phase a.c. motors, transformers and lighting circuits.
The DHSG-1 switchgear unit offers the following advantages:
power-loss monitoring for overcurrent, short circuits and earth faults, including cold conductors
lighting output in the supply voltage with separate earth-fault monitoring
unit-running indicator in 42 V and 42 V output mode with earth-fault monitoring
intrinsically-safe controls with integral start-up warning and siren function
compact space-saving design.
The unit is designed for operating voltages of 500 V to 1000 V. Voltage switching is achieved by means of a simple plug changeover.
|
|
High-Voltage Switchgear
For high-voltage systems from 3.3kV to 24kV, AEC's metal-clad and metal-enclosed switchgear provide centralized circuit control . A complete line of functional units is available for control and protection of motors, transformers, generators, distribution lines, rectifiers, M-G sets, and similar power equipment. Each standard self-contained unit utilizes basic world reliable components including vacuum circuit breakers, magnetic blast breakers, instruments, relays, meters, instrument transformers, and control devices.
Convenient access to all components and use of vertical lift horizontal drawout breakers shortens the times necessary for inspection and maintenance.
|
|
TERASAKI designs / manufactures / provides Medium Voltage Switchgear which meet the various environmental conditions for industrial, and they offer highly reliability, quality, safeness and user-friendliness.
Standard Specifications
For Applicable Standards IEC 62271-200 / JEM1425
For Ratings
1: Rated Insulation Voltage AC 3.6kV , 7.2kV , 12kV , 15kV
2: Rated Frequency 50Hz / 60Hz
3: Control Voltage AC110V , DC100V
4: Bus-bar Current 630A , 1250A , 1600A ,
2000A , 2500A, 3150A
5: Rated Short-time Current Max. 50kA
For Constructions
1: Degree of Protection IP41 Indoor
2: Panel Construction Metal-enclosed Switchger and Controlgear
|
|
Low-Voltage Switchgear
Low-voltage metal-enclosed switchgear are designed for the control and protection of power circuits of fans, pumps, lighting and machines at 220V, 240V, 380V, 480V, or 600V. These switchgear are adapted for power centers such as central stations auxiliary power circuits for fans, blowers, compressors, pumps, lighting circuits industrial plants power and lighting networks, power feeders, lighting feeders power generation and auxiliary power drives for machine tools and material handling equipment.
|
|
The Entellisys low-voltage switchgear is a breakthrough in power distribution protection, control, monitoring, diagnostics, and ease-of-use. System functionality is based on synchronized, real-time information from every circuit breaker, simultaneously processed in one place.
Entellisys helps to reduce costs, shorten schedules, and increase reliability throughout the process of designing, installing, maintaining, and owning your low-voltage power distribution switchgear. In one real-world example, Entellisys saved its user $50,000 during design and installation of a large system, and will save up to $500,000 each and every year during operation and maintenance
|
|
|
|
|
|
GE's latest low voltage switchgear offering - AKD-10 OEM Module - offers the OEM customer a switchgear product package just for their needs. Now, OEM's can order single vertical sections that can be combined by their own personnel to form a wide variety of line-up configurations. There are many options for the modular sections which allows OEMs to order equipment that fits their manufacturing capabilities. This modular package gives OEM's the ultimate in design flexibility.
Features and Benefits
* Fabrication and stack pre-assembly by GE factory experts
* Detailed part drawings for fabrication and installation instructions that allow the OEM to cut costs by manufacturing parts in house.
* Many AKD-10 switchgear features are available
* Designed for GE's latest power circuit breaker -WavePro™
Product Scope
* Ratings 1600 Amp, 2000 Amp, 3200 Amp, 4000 Amp main bus
* Indoor NEMA 1 construction
* 60", 67", 74" stack depths available
* 3 wire or 4 wire with neutral
* 65 kA AIC & 100 kA AIC
* Removable top covers
* Blank instrument panels above each blank and breaker cubicle
* UR label
|
|
|
|
|
|
AKD-20 low-voltage switchgear continues the tradition of the AKD switchgear line while delivering enhanced arc flash protection. Built to ANSI standards, its protection features include non-vented panels plus insulated and isolated bus, and it integrates our new state-of-the-art EntelliGuard® breaker-trip unit system. It also features an optimized footprint so that it now fits into a smaller area for the most common configurations.
EntelliGuard® G circuit breakers are the newest line of GE low-voltage circuit breakers, the next step in the evolution of a line known for its exceptional designs and performance. They are available from 800A to 5000A, with fault interruption ratings up to 150kAIC – without fuses.
Integral to the EntelliGuard G line are the new, state-of-the-art EntelliGuard TU Trip Units, which provide superior system protection, system reliability, monitoring and communications. The breaker-trip unit system delivers superior circuit protection without compromising either selectivity or arc flash protection.
The EntelliGuard breaker-trip unit system demonstrates yet again GE’s core competencies in reliable electric power distribution, circuit protection and personnel protection.
AKD-20 includes many features that address the needs of system reliability, arc flash protection and reduced footprint size.
|
|
Our low-voltage control equipment operates motors and special consumers in potentially explosive mine openings in the area of mining and heading. They can be supplied for the following voltage levels: 500V and 1000V.
They are characterized by:
flameproof equipment compartment with central locking system
terminal compartment in flameproof or increased safety
installations such as power switch, vacuum and air connectors
standard enclosure with a volume of 540, 600 and 1000 litres
special constructions on request
|
|
|
|
|
|
Looking into the future!
Finland, Jyvaskala January 2006 Jean Mueller launched their new IP20 protected L-shaped busbar system for the Scandinavian market. This system was especially designed for the Jean Mueller, vertical SL-fuse switch disconnector cassette system to protect people from touching the live copper bars. Next to their already existing busbar solution with flat copper bars this completes the ranges for the Scandinavian market. The question now rises if there is an enclosure solution which can handle both busbar systems into one solution?
The Eldon answer for the ABB and Jean Muller Vertical cassettes
In close co-operation with both ABB and Jean Mueller, Eldon has developed a ready to use market solution for both types of cassettes. The SL-fuse disconnector of JM and the InLine cassette of ABB. The new enclosure type is called MCBAxxxxV for Vertical mounting of the units. Customers who are buying the Eldon Multi-Flex® solution can decide either to build-in the IP20 protected busbar system or the standards flat copper busbar solution. Both will fit.
|
|
|
|
|
|
AKD-20 low-voltage switchgear continues the tradition of the AKD switchgear line while delivering enhanced arc flash protection. Built to ANSI standards, its protection features include non-vented panels plus insulated and isolated bus, and it integrates our new state-of-the-art EntelliGuard® breaker-trip unit system. It also features an optimized footprint so that it now fits into a smaller area for the most common configurations.
EntelliGuard® G circuit breakers are the newest line of GE low-voltage circuit breakers, the next step in the evolution of a line known for its exceptional designs and performance. They are available from 800A to 5000A, with fault interruption ratings up to 150kAIC – without fuses.
Integral to the EntelliGuard G line are the new, state-of-the-art EntelliGuard TU Trip Units, which provide superior system protection, system reliability, monitoring and communications. The breaker-trip unit system delivers superior circuit protection without compromising either selectivity or arc flash protection.
The EntelliGuard breaker-trip unit system demonstrates yet again GE’s core competencies in reliable electric power distribution, circuit protection and personnel protection.
AKD-20 includes many features that address the needs of system reliability, arc flash protection and reduced footprint size.
|
|
|
GE offers a complete product range combining high operational safety with high technical characteristics.
|
|
|
A distribution equipment of 600V or less used by power plants or water and power distribution system, LS Industrial Systems' GL Type Power Center can be applied to various industrial uses by adopting low voltage metal clad switchgear standards, JEM-1265 or IEC 158, 439.
|
|
Solution for tested Low Voltage Switchboards up to 3200A
Description
Prisma Plus G: Wall-mounted and free-standing enclosures for electrical switchboards up to 630A, Icw: 25kA rms/1s (wall-mounted)
Prisma Plus P: Cubicles for electrical switchboards up to 3200A, Icw: 85kA rms/1s (cubicles)
For tested switchboards IEC 60439-1 (IEC 61439-2 in progress)
Technical data:
-Metal enclosures
-Colour: white RAL 9001
-Degree of protection: IP30 to IP55
|
|
Low Voltage Switchgears General Specifications
TERASAKI designs / manufactures / provides Low Voltage Switchgears which meet the
various environmental conditions for industrial, and they offer highly reliability,
quality, safeness and user-friendliness.
Item Standard Specifications
For Applicable Standards IEC 60439-1 / JEM1265
For Ratings
1: Rated Insulation Voltage: AC690V
2: Rated Frequency :50Hz / 60Hz
3: Control Voltage: AC110V , DC100V
4: Bus-bar Current :400A to 3150A ,
5: Rated Short-time Current :Max. 85kA
For Constructions
1: Degree of Protection IP41 Indoor
2: Panel Construction Metal-enclosed Switchger and Controlgear
|
|
The new air-insulated DRIESCHER mediumvoltage
compact switchgears are ideal for application
in secondary substations without control
aisles.
They meet the user's specific requirements to the
full and ensure a satisfactory power distribution.
|
|
Power/Vac Metal Clad Switchgear:
GE's POWER/VAC product line combines the features of metalclad construction with POWER/VAC vacuum interrupter technology in the manufacture and design of a superior class of medium voltage switchgear. Available with ratings from 5 to 38kV.
PV System 27/38 Metal Enclosed Switchgear:
This 38kV switchgear delivers advanced vacuum circuit breaker technology and uncompromsing attention to every detail.
Power/Vac® OEM Express Switchgear:
Designed with the OEM in mind, POWER/VAC® OEM Express is fully assembled, mechanically complete switchgear without devices and wire.
Arc-Resistant Metal Clad Switchgear:
Our arc-resistant switchgear offering is designed to direct and control the energy released while minimizing injury to personnel and reducing collateral damage to surrounding equipment. Available with ratings from 5 to 38kV.
|
|
|
Arc resistant switchgear channels the energy released during an internal arc fault in ways that minimize the potential for injury to personnel and damage to surrounding equipment. Across the line, this switchgear leads the way in arc resistant technology. It’s available in ANSI Type 1 or Type 2 construction with no larger footprint than the standard switchgear design. Circuit breakers are interlocked so they cannot be opened, closed or racked to the connected position with the arc resistant door open. This minimizes the opportunity for operator error. But arc resistant protection is important at every step, not just when opening and closing the circuit breaker, so our single-latch doors close and engage in a single action, which provides virtually automatic protection for the operator. The pressure release venting panels are maintenance-free.
|
|
Power/Vac® Metal Clad Switchgear
GE's POWER/VAC® product line combines the features of metalclad construction with POWER/VAC vacuum interrupter technology in the manufacture and design of a superior class of medium voltage switchgear. Available with ratings from 5 to 38kV.
PV System 27/38 Metal Enclosed Switchgear
This 38kV switchgear delivers advanced vacuum circuit breaker technology and uncompromsing attention to every detail.
|
|
|
|
|
|
Designed with the OEM in mind, Power/Vac® OEM Express is fully assembled mechanically complete switchgear without devices and wire. This results in shorter cycles than finished switchgear products, while allowing the OEM to add contributive value by mounting devices and wiring the equipment. OEM Ex-press is the same robust, high quality design, which has made Power/Vac ® switchgear and Power/Vac® breakers the most recognized name in the industry for medium voltage switchgear. A full range of ratings is available from 5kV 250mva through 15kV 1500mva. Both indoor and outdoor construction is offered along with a wide variety of stacking configurations.
Features and Benefits
* Two high breaker stacking
* Blank front hinged doors - door punching optional
* Bolted rear covers
* Includes internal device mounting panels
* Terminal block mounting space
* Ground & Test devices, test cabinet, remote racking available
Product Scope
* Ratings 5kv 250 mva through 15kv 1500mva
* 1200 amp, 2000 amp, 3000 amp bus
* Indoor & outdoor construction
* Features GE Power/Vac vacuum breakers
* UR label
|
|
|
|
