|
|
|
|
|
|
The new equipment R-SIM, developed by REGULATOR-CETRISA, can detect any metal and separate it from the rest of the non-metallic materials.
The result: having a good separated fraction of metals or rather material that is free of metals.
The operating principle of the Metal Separator by Inductive Detection and Blowing (R-SIM) is based on having a combination of highly efficient sensors available that cover the entire width of the equipment. A metal on the detector produces a signal that is processed at high speed due to an electronic advancement (CPU). It then acts on a complex pneumatic system that carries out the physical separation. A studied distribution of the detectors, the high capacity of processing information and a precise system of pneumatic valves allow the metal to be “blown”, changing its path and separating it from the natural path and the rest of the materials.
The Metal Separator by Inductive Detection and Blowing (R-SIM) has an acceleration belt that can handle large volumes of processed material. Likewise, a PC with a touch screen can modify and adjust the different parameters in order to obtain the optimum separation.
The R-SIM is equipped with a filtering system of air and pneumatic control that ensures the air quality and pressure that are necessary for the equipment to run correctly.
|
|
|
|
|
|
RAPID 5000 hygenic design - Metal separator for free-fall applications
RAPID 5000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from free-falling bulk materials by means of a reject flap ("Quick Flap System") without any interruption to the production process. This has proved to be a highly effective method of removal especially for powders and fine-grained bulk materials.
RAPID 5000 metal separation systems have been specifically designed to meet exacting hygiene standards and are therefore particularly suitable for the food, chemical and pharmaceutical industries.
Advantages:
• Hygienic, circular design for easy cleaning
• Product build-up, blockages and the resulting mould formation are avoided
• Quick-release fasteners enable the reject mechanism to be installed and
removed rapidly
• Unit is quick and easy to clean
Typical applications:
• Incoming goods inspection of spices, ingredients, raw materials etc to
protect machinery (eg grinders)
• Quality inspection (for consumer protection) of herbs, tea, milk powder,
chemical additives (eg ascorbic acid) etc immediately prior to filling in bulk
bags and boxes
• Quality inspection of cereals prior to form, fill and seal machinery
|
|
SAFEMAG+PROTECTOR - Combination of inline magnet and metal separator
SAFEMAG+PROTECTOR is the optimal combination for separating magnetic and non-magnetic metal contaminations in plastics processing.
It is primarily employed to protect processing machinery. The SAFEMAG magnet separator removes all magnetic contaminations. The PROTECTOR reliably detects and separates all the remaining non-magnetic metals.
Advantages:
• extremely high forces of the Neodymium magnet material even allow the
separation of iron powder and of slightly magnetised stainless steel particles
• prevents mould damage
• reduces reject rates
• minimises the loss of good material
• increases machine running times
• outstanding ease of integration in existing systems by way of adaptor plates
|
|
|
GF PRIMUS metal separation systems remove magnetic and non-magnetic metal particles (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulates and reground material. Metal contaminants (and inclusions) are removed by means of a reject flap (‘Quick Flap System’) without any interruption to the material flow, even at high flow rates.. Contaminated material is rejected into a container. The reject container is emptied automatically. The GF PRIMUS metal separation system is primarily used in industries where hygiene standards are less important. It is used for inspecting dry bulk materials.
|
|
stainless, residue, municipal waste, WTE-Ash electronic-scrap, wood chips, glass, mould sand
The inductive sorting system ISS® is the perfect solution to recover the non-ferrous metals not recovered by ECS processing or magnetic separation. The ISS® provides efficient and effective automated recovery of metals, stainless steel and any other metals, eliminating the need for hand picking. The primary applications for the ISS® are shredder residue, electronic scrap, wood chips, glass, domestic waste, and mould sand.
The recovery of stainless steel from ECS waste streams and the processing of electronic scrap are ideal uses for the ISS®. The ISS® is the solution for removing tramp metal from bulk material to ensure the quality of the processed product.
|
|
|
All-metall separator for the inductive separation of metallic foreign matters at free fall, separation of the contaminated material by a pneumatic flap
|
|
ELCON
Single-face metal detector for installation on coveyor belts and material chutes.
The single-face metal detector ELCON is used to inspect poured or bulk materials, preferably of a thin nature, on belt conveyers or material chutes.
It detects all magnetic and non-magnetic metal contamination (steel, stainless steel, aluminum...) even if enclosed in the product.
On detection of metal, a signal device and a separation system can be activated or a signal can be send to the process controlling.
■ Detection of magnetic and non-magnetic metal contamination, even if enclosed in the product
■ Reduced costs regarding breakdown of machinery product waste
■ Secures product quality
■ Protects against customer complaints
|
|
GLS closed aperture, tunnel metal detectors are equipped with digital technology and used for inspecting bulk materials or individually packaged product on belt conveyors, material slides or vibratory conveyors.
GLS metal detection systems detect all ferrous and non-ferrous metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or the reject unit is activated.
The enclosed type of construction ensures that very high sensitivity is achieved throughout the entire tunnel area. For this reason the GLS range is highly suited to precise applications in the food industry.
The size of the detector is dependent upon application, conveyor belt width and product height.
|
|
VARICON metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product.
The system comprises 4 main components:
• GLS tunnel metal detector
• special conveyor (width of belt from 500 mm)
• “stop-on-detect” control unit
|
|
The RMS series of tunnel metal detectors (with circular aperture) are mainly used for inspecting bulk materials in pipeline systems (gravity or airborne feed). They are also often used in the ejection area of production machines to identify rejects or broken tools.
RMS metal detectors detect all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or a flap is activated to remove the contaminant.
The RMS metal detector range is mainly used in industries where hygiene standards are less important. They are used to inspect products which have little or no product effect.
The size of the metal detector depends on the application and nominal width of the pipeline.
|
|
Modello : MGS9/1B
Attacco al Processo : filettato, inox e materiali speciali
Membrana : saldata, inox e materiali speciali
Pressione di Esercizio : -1...0/0...40 bar
Tenuta : guarnizione PTFE
Caratteristiche Supplementari : smontabile
|
|
The task of a suction line accumulator is to protect the compressor from so called liquid hammers, which can be caused by the carry over of liquid refrigerant.
The consequence of such a liquid hammer will be the damage of the following compressor parts:
• Suction Valve
• Discharge Valves
• Pistons and Connecting Rods
• Gasket
• Bearings
ESK suction line accumulators incorporate the injection principle, which prevents the transport of liquid refrigeration into the compressor, even if the accumulator is filled up with liquid.
|
|
Differential pressure indicators (DPIs)
"On condition" maintenance is a feature of modern fluid power technology. Our DPIs provide a signal to show the extent of filter blockage thus reducing maintenance time and costs by eliminating unnecessary filter element change.
Our range includes differential pressure indicators, switches and electrical indicators.
Microfiltrex can provide DPIs with many special features :
* Visual and/or electrical indication
* Thermal lock
* Flow surge suppression
* Non-reset function
|
|
| ... products without technical information |
| |
Magnetic separator for conveying lines.
The PneuMag is a high intensity magnetic separator designed to remove ferrous and stainless steel scrapings from pneumatic conveying lines operating at up to 25m/s.
It features a centrally positioned high intensity magnetic grid with quick release toggle clamps, tamper proof cover plate and totally stainless steel construction.
The PneuMag is particularly suited to flour, sugar and other powder and granulate processing.
High magnetic performance - 9000 Gauss
Reduces 'spark' risk
316 grade stainless steel construction
Cleaned in under 30 seconds
Tamper proof guard
Silicon rubber, metal detectable seal
|
|
|
GF PRIMUS metal separation systems remove magnetic and non-magnetic metal particles (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulates and reground material. Metal contaminants (and inclusions) are removed by means of a reject flap (‘Quick Flap System’) without any interruption to the material flow, even at high flow rates.. Contaminated material is rejected into a container. The reject container is emptied automatically. The GF PRIMUS metal separation system is primarily used in industries where hygiene standards are less important. It is used for inspecting dry bulk materials.
|
|
|
The Meech Model 958 Sheet Separator system has been designed to allow efficient operation of automatic sheet feeders by eliminating static charges and separating the sheets with a controlled blade of ionised air. The Model 958 system comprises one or more full flow Meech ionising air curtains on adjustable brackets, which are mounted on the cross rod of the feeder. The Model 957 air curtains incorporate Model 915 static elimination bars, which are driven by a Model 904 power supply (refer also to Models 904, 915 and 957 data sheets). The air supply should be equipped with a pressure regulator and 5 micron filter.
|
|
|
The Meech Model 958 Sheet Separator system has been designed to allow efficient operation of automatic sheet feeders by eliminating static charges and separating the sheets with a controlled blade of ionised air. The Model 958 system comprises one or more full flow Meech ionising air curtains on adjustable brackets, which are mounted on the cross rod of the feeder. The Model 957 air curtains incorporate Model 915 static elimination bars, which are driven by a Model 904 power supply (refer also to Models 904, 915 and 957 data sheets). The air supply should be equipped with a pressure regulator and 5 micron filter.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
