|
|
| Maintaining the same size footprint of previous models, the sleek new pump offers a number of product enhancements to provide longer life and product convenience, while the physical design signifies supreme quality. The newly redesigned housing improves the drives heat transfer properties, as it generates heat farther away from the electronic components to maintain the long-term integrity of the PC Board. Electrical connector attachments have been repositioned to the front of the pump for easy access. With a new clear cover the face of the pump is shielded from exposure to corrosive substances yet lifts easily for convenient access, allowing operators to view dial settings for fine-tuning output. In addition, the pump and liquid end mounting geometries have been improved for enhanced connections. For more information please contact LMI Milton Roy |
|
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. The mechanically actuated diaphragm reduces the possibility of hydraulic oil contamination of process liquid which makes this an ideal pump for water treatment applications. DC variable speed drives are available for external control and automation.
The SD & SG metering pumps offer a high level of reliability with outstanding value for applications up to 175 psi (12 Bar). |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
High discharge accuracy
The main components such as the plunger and cylinder are processed with high precision of micron order, so it is possible to obtain high discharge accuracy. (Discharge accuracy : }0.5%) By changing the angle of the pump head it is possible to freely adjust the discharge amount between 0 and maximum discharge.
Excellent corrosion resistance
Materials such as silicon carbide (SiC), fluorocarbon polymers (PTFE) and stainless casting (SCS14) with excellent resistance to corrosion are used for parts that come in contact with the fluid. This makes it possible to use the pumps for handling a wide range of chemicals.
Dispense into a vacuum condition and removal from a high-pressure condition
Since there are no suction and discharge valves, it is possible to directly dispense a constant amount of fluid in a vacuum (negative pressure) without using a solenoid. Constant-volume dispensing is also possible if suction side is pressurized.
Capable of handling slurries and highly viscous fluids
The unique valveless construction and the excellent resistance to wear of SiC, it is possible to handle slurries with fast precipitation speed as well as abrasive slurries. Also, the pumps are capable of smoothly pumping highly viscous fluids up to a maximum viscosity of 20,000 mPa¥s.
Note: The discharge accuracy drops for viscous fluids with a viscosity of 500 mPa¥s or greater. Contact this company for details.
|
|
The FEM diaphragm dosing pump has been specially developed
in order to accurately dose small quantities of liquid over a long
period of time whereby two of its most distinctive features are its
compact size and robustness (pump and electronics). The FEM
pump and electronics makes a complete dosing system which
is suitable for both simple as well as complex applications. With
the functions quasi continuous flow and batch dispensing the
FEM diaphragm pump differentiates itself from pumps based on
alternative technologies eg. piston, gear, syringe and peristaltic
pumps. Other interesting features are its high reliability, a
favourable purchasing price and low maintenance costs.
KNF has developed a specially programmed electronic control
module so that the integrated solenoid valve and the movements
of the diaphragm are exactly synchronised. This results in an
exact dosing which is gentle and low in pulsation. In addition
to these unique pump characteristics the control module also
allows a wide range of control possibilities to be used eg.
serial interfaces.
The dosing pump is self priming, maintenance free and can
be run dry |
|
| These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price. |
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control |
|
The MultiFertic® injection pump are heavy duty, high precision pumps for chemicals products and additives, made up of one driving module and 1 to 4 injection modules for 25 to 500 l/h. - 7.5 to 150 GPH
In the same injector can be connected several injection modules to apportion different products (INDEPENDENT INJECTION) or to increase the injection flow. By increasing the number of modules in the same injector, a higher flow regularity is obtained, whereby in the 4 modules model an actually continuous flow is obtained. |
|
The dosing pumps Dositec® are heavy duty, high precision, electric diaphragm pumps for dosing liquid products.
|
|
High speed operation
Up to 360 strokes per minute results in high resolution chemical feed, elimination of slug-feed effects.
Compact size
Ideal for OEM specifications, ES pumps are small, quiet, and lightweight.
Double ball check valves
The ball, seat and guide assembly ensures a tight seal to prevent loss of prime.
Long lasting diaphragm
PTFE laminate over EPDM is molded onto a solid core. A retainer plate is provided to minimize flow rate changes as pressure varies.
|
|
The Milroyal has been recognized as the most reliable and robust industrial duty metering pump since its introduction. The flexibility of various liquid end designs, availability of "custom engineered" modifications, and a wide range of flows and pressure capability, the Milroyal family of pumps is capable of meeting most any application.
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Mechanically Actuated Refill Valve (MARS)
No Process Side Contour Plate
Pressures up to 4,350 psig (300 bar g)
Flows up to 2,657 gph (10,058 lph)
Meets API Standard 675
|
|
| The ElectroFertic®2000 metering pump is an electric piston dosing pump made up of a driving module and one or two injection modules of 500, 750, 1000 l/h (132, 198,234 GPH) with electronic regulation by means of an inverter |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
High pressure pump for viscous fluids or other applications.
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
Hydraulic injector pump for the injection of liquid or soluble fertilizer into irrigation network.
It is self contained, with no externals parts other than the connection hoses, and with no water pressure lost in the irrigation pipes
A controller ca be connected that acts upon an electrical valve to start and stop the pump in the desired moment
|
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
Autoclude has an extended program tube pumps, including housings. Dependant on the model the pumps are either very suitable for sampling. laboratory applications, continuous processes, batch dosing etc.
1. Cased Series, Easy tube load / IP66
The tube pumps with an easy tube load are available with 5 different tubing mateirals in six Ø sizes. There are 4 models; manual control, auto control, programmable and IP66 programmable dispenser. Flows up to 1,8 l/min.
2. Cased-series, Heavy duty 3000i / IP66
The tube pumps heavy duty have a robuuste pump head for cnotinuous operation. Special tubing for high viscous liquids. 5 tubing materials in 3 Ø sizes. There are for models; manual control, auto control, programmable and IP66 programmable dispenser. Flows up to 3,25 l/min.
3. Cased-series, 8000 Heavy duty
Tube pump, including housings for variable control (speed/flow). Flows up to 8 l/min.
4. Cased-series, Variable speed
Compact tube pumps with quick suction abilities. The design is robust to enable continuous operation. Flows up to 8 l/min. |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
The new HL-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T3B or Zone 2, II 3G EEx nC IIC T3 environments. Suitable for installation in locations providing adequate protection against the entry of solid foreign objects or water capable of impairing safety. The Hazardous location rating is achieved through internal design modifications including the use of brushless DC motors. This approach eliminates the need for purge boxes or other additional safety devices.
The HL controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly. An optional extension cable for remote operation lets you locate the pump up to 50 feet from the controller. |
|
MacRoy D
Multi-function discharge valve for pressure relief, back pressure, purge, & bleed
Front-end scavenging drive design for full evacuation of process fluid regardless of pump capacity setting
Unique motor controller available for automatic control from either a pulse or 4-20 ma signal
MacRoy G
Double diaphragm available
High viscosity and slurry liquid end options
56C face and IEC motor options
Variable eccentric drive design minimizes flow pulsations and mechanical shock
%u2022 AC & DC variable speed drives available for automatic control from a 4-20 ma signal
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Triple Diaphragm Design
Double Ball Check Valves
Pressures up to 15,000 psig (1,035 bar g)
Flows up to 175 gph (663 lph)
Meets API Standard 675 |
|
| The ElectroFertic®2000 metering pump is an electric piston dosing pump made up of a driving module and one or two injection modules of 500, 750, 1000 l/h (132, 198,234 GPH) with electronic regulation by means of an inverter |
|
GENERAL SPECIFICATIONS
Designed for continuous operation in industrial applications
Hydraulic "by-pass" mechanism actuates PTFE diaphragm
Very compact package with small footprint
Capacity adjustment from 0 to 100% of rated flow with ±1% steady state accuracy over a 10:1 turndown ration
High performance single and double check valves
Integral over-pressure safety valve
AVAILABILITY Simplex and Duplex available (on most models)
Liquid end materials available: cast iron, 316 stainless steel, alloy 20, alloy C22, PVC, & PVDF (on most models)
Multiple stroking speeds available to cover intermediate flow ranges
Motor mountings available: various integrated motors; API & close coupled NEMA 56C, 48 can frame; API & close coupled IEC 71 B5; and, API 143/145 TC (on most models)
Manual, pneumatic, or electronic capacity control available (on most models)
Double diaphragm rupture detection available (on most models)
ANSI flanges available for suction & discharge connections
|
|
High capacity gear metering unit for the processing of filled and unfilled elastomeres in injection and spreading applications. Variably adjustable mixing ratio with an output capacity of 1 to 8 kg/min., depending on the material.
Separately driven metering pumps with permanent control and readjustment of the mixing ratio via the 2KM processor control. |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
Characteristics
Horizontal or Vertical.
Single Stage.
Enclosed Impeller.
Applications
Water.
Waste Water.
River Water.
Rain Water. |
|
For the dosing of liquid chemicals, Alltech Dosieranlagen GmbH has developed the piston diaphragm metering pumps of the FKM series.
These metering pumps meet the highest requirements in operational reliability and accuracy.
Alltech piston diaphragm metering pumps are built in a modular concept. This guarantees high flexibility in combining the pump elements for various areas of applications.
By using different materials and designs for the liquid end, Alltech metering pumps may be used for the dosing of almost all kinds of chemicals.
To find an optimal solution for your dosing tasks, we offer various dosing capacities and pressure ranges.
The integrated pressure relief valve guarantees maximum security.
A wide range of accessories (stroke actuators, pulsation dampers e.g.) completes the range of our production.
|
|
The MultiFertic® injection pump are heavy duty, high precision pumps for chemicals products and additives, made up of one driving module and 1 to 4 injection modules for 25 to 500 l/h. - 7.5 to 150 GPH
In the same injector can be connected several injection modules to apportion different products (INDEPENDENT INJECTION) or to increase the injection flow. By increasing the number of modules in the same injector, a higher flow regularity is obtained, whereby in the 4 modules model an actually continuous flow is obtained.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball Check Valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
|
|
