|
|
- Solenoid-driven Diaphragm Metering Pumps
MAGDOS LT
MAGDOS LC
MAGDOS DE/DX 01...12
MAGDOS DE/DX 20...100
- Motor-driven Diaphragm Metering Pumps
MINIDOS A
MIDIDOS E
MEMDOS E / DX 4...150
MEMDOS E / DX 160...380
MEMDOS GMR
MEMDOS MR
- Motor-driven Piston Metering Pumps
FEDOS E/DX
REKOS KR
KARDOS KN
KARDOS N
|
|
High Fashion Flowing Apparel:
Viscose and Polyester Silk made with Feinpruef Spinning Pumps by Mahr Metering Systemsvon Mahr Metering Systems
Application
Your Filaments are Our Business Your production depends on exact metering of the materials you process, and your Spinning
Pumps must be precisely tuned
to the specific requirements
of your manufacturing process. Mahr Metering Systems has a wide product range that covers virtually all applications – including yours.
- Filaments for highly elastic stretch fabrics
- hollow fiber for medical and filter purposes
- fibers for high strength applications such as safety belts
- fine denier fiber for the finest of haute couture
|
|
LMI Pump : ELECTROMAGNETIC dosing pumps, the LMI range is electronically operated. Flow rates up to 76 l/h and pressures up to 135 bar.
G™ Pump : Motor-driven dosing pumps with mechanically actuated diaphragms. Flow rates up to 1200 l/h and pressures up to 12 bar.
mROY® Pump : HYDRAULICALLY actuated diaphragm dosing pumps. Flow rates up to 310 l/h and pressures up to 123 bar.
MAXROY® Pump : ELECTRIC MOTOR-driven hydraulically actuated diaphragm dosing pumps. Flow rates up to 1100 l/h and pressures up to 28 bar.
MILROYAL® / PRIMEROYAL® Pumps : These HIGH FLOW and HIGH PRESSURE dosing pumps present a huge capacity of adaptation to meet the specific requirements of your industrial processes. Flow rates up to 50,000 l/h and pressure up to 500 bar.
Automatisms - Regulation : A range of systems for flow rate automation.
Accessories : A wide range of accessories to round off any dosing pump facility
|
|
|
|
|
|
Motor Driven Pumps Spring Series
Plunger Piston Metering Pumps PS1 Series
PS1 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 1,5 to 304 L/h
Max pressure: 20 BAR
Stroke rate: 58 • 78 • 116 strokes/minute
Motor: standard 0,18 and 0,25 Kw (IP 55)
Stroke length: 15 mm
Plunger Piston Metering Pumps PS2 Series
PS2 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 40 to 1000 L/h
Max pressure: 20 BAR
Motor: standard 0,25 • 0,37 • 0,55 • 0,75 Kw (IP 55)
Stroke length: 25 mm
Mechanical Diaphragm Metering Pumps MS1 Series
MS1 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 5,5 to 460 L/h
Max pressure: 10 BAR
Motor: standard 0,18 • 0,25 • 0,37 Kw (IP 55)
Stroke length: 2 mm • 4 mm • 6 mm
Mechanical Diaphragm Metering Pumps
MS0 Series
MS0 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in a plastic housing.
Capacity: from 17 to 47 l/h
Max pressure: 5 bar
Diaphragm diameter: 50 mm
Motor: standard 0,08 kw (IP55)
Stroke length: 2 mm
|
|
Features
- Individual control board for each pump Programmable duration of each injection
- Self-Priming Pump Continuous Run Setting
- On-Board Prime Button Stackable Pump Head
- Variable Speed Adjustment
- Watertight and Durable Enclosure
- Selectable Cycles per Day
- Pump Inication Light
- External On/Off Switch
- 2.8 gal/hour Maximum Rate
The SF-4000 and SF-6000 dispensers are ideal for applicactions requiring daily chemical maintenance. The SF-4000 is a single drive system and the SF-6000 is a dual drive system that can be used for two separate chemicals or for two separate locations. These can be used as stand alone units for periodic injection of maintenance chemicals or can be used in conjuction with an automatic controller.
|
|
* Hydraulic diaphragm pumps AX series
The highest riliability system metering pump
Max. discharge capacity: 51.6/49.7 L/min
Max. discharge pressure: 5.0 MPa
Main materials: PVC, SUS316
more
* Mechanically-driven diaphragm pumps LK series
Applicable to the many diverse needs of chemical feeding
Max. discharge capacity: 45/54 L/min
Max. discharge pressure: 1.5 MPa
Main materials: PVC, PVDF, SUS316
more
* Mechanically-driven diaphragm pumps SK series
Answer to wide-range application from inclusion into a system to plant facilities
Max. discharge capacity: 1.1/1.32 L/min
Max. discharge pressure: 1.5 MPa
Main materials: PVC, PVDF, SUS316
|
|
Serie LK
Compact and light weight metering pump
The specific feature of the LK series ist the dual-cam driving section with a highly reliable worm gear type speed reducer. Achieving maximum wear resistance in continous operation was a goal of the construction. The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible.
Various Typs and material
Fitting for nearly any application a various number of pump sizes are available. Moreover six different material combinations can be choosed for the pump heads. So most applications can be covered. To select to best fitting connection, flange, hose and pipe connections are available as standard.
|
|
The EW Series is the flagship of the E-Class with capacities up to 6.7 GPH (25.4 l/h) and a maximum pressure of 150 PSI (10 bar). Compact, powerful and packed with a variety of innovative design features the EW can enhance any feed application.
IP65 Construction
The rugged Polyphenylene Oxide (PPO) enclosure is equipped with a durable clear cover to protect the membrane switches and stroke control of the pump, which are mounted opposite the liquid end. The display utilizes a high temperature LCD that provides extra protection from sunlight in outdoor applications.
|
|
General description:
ELADOS EMP metering pumps are reciprocating positive-displacement pumps with a special electrical motor drive which has been tried and tested in the field. The use of various types of controller means that the pumps can be adapted to any operating procedures for quantitative and proportional metering.
Features :Electric motor-driven diaphragm pump for dosing capacity 1,4 - 24,0 l/h
|
|
The MEMDOS DX motor-driven diaphragm dosing pump does not only stand out for its performance but also for its reliability, versatility and user-frienliness: The control is easy to understand and to operate.
MEMDOS DX pumps care totally leakage-free and thus also suitable for toxic and aggressive media.
On request, the MEMDOS DX pumps can also be supplied with a double-diaphragm system. Then uncontrolled leak-age of media is avoided even if the dosing diaphragm wears out.
Wherever high flow rates in controlled processes are required e.g. in sewage treatment plants. Thanks to the sturdy tappet drive with manual or automatic capacity adjustment, acids, lyes, precipitating agents and flocculents are dosed reliably and precisely.
|
|
|
Metering pumps with mechanically linked diaphragms are almost universally applicable in the low pressure range. They offer a favourable cost/performance ratio at minimum service effort.
|
|
* Aluminum pump housing; 4 5/8" x 5 3/8" x 4 3/16"
* Internal stainless steel components
* Available in fixed speed, mechanical speed control, air drive,Variflow DC, and explosion proof assemblies.
* Positive displacement pump with flow rates of .95 GPM(3.6 LPM)
* Applications: Industrial, Pulp & Paper, Ink, Food, Metering, Solvents, Slurry, Pulp and Paper, and Laboratory
|
|
Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
Features
• Air-free dispensing
• Snuff-back prevents post-dispense dripping
• Simple load mechanism also provides easy cleaning
• Manual or Timed modes
• Large digital LED display
• Clean room compatible
|
|
Peristalitc Pumps
SAFE AND RELIABLE
■ Polypropylene enclosure extremely shockproof and resistant to chemical aggression.
■ IP 65 protection degree and class 2 electrical insulation (no ground connection required)
USER FRIENDLY
■ Via trimmer settings simple and fast parameters configuration
■ Plugs for protecting settings to avoid undesired tampering
EASY INSTALLATION AND MINIMUM MAINTENANCE
■ Easy wall mounting and removing
■ Plugs on circuit board provide for a quick electrical connection
■ Easy tubing replacements.
|
|
The MultiFertic® dosing pump is a heavy duty, high precision electric or diaphrgam pump for dosing chemicals products and additives. It is made up of one driving module and 1 to 4 injection modules for 25 to 500 L/H (7.5 to 150 GPH).
In order to dose different products (INDEPENDENT INJECTION) or increase the inyection flow, several injection modules can be connected in the same injector. If we do so, we can obtain a higher flow regularity. In the case of 4 modules the injection flow is practically constant.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball Check Valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
|
|
|
|
Piston pumps are precise and – compared to diaphragm dosing pumps – almost pressure-independent metering units. The flow rate changes in proportion to the stroke length and can thus be adjusted to very small values. Fields of application are – among others – process engineering and chemical processes, i.e.: wherever the medium must be metered precisely.
The FEDOS E / DX piston dosing pumps from Lutz-Jesco are available at flow rates between 0.17 and 31.5 l/h, with or without microprocessor control. Depending on the size of the pump, maximum pressures between 30 and 200 bar are admissible.
If no control is required for constant metering, the motor is connected directly to the terminal box. In this case, FEDOS E pumps are used. To change the flow rate, either the stroke length can be adjusted mechanically, or the speed of the motor is controlled by means of a separate frequency converter.
FEDOS DX pumps are used if an integration in controls or automatic control systems is requested.
FEDOS DX pumps allow the adaption to a large number of different control systems and system monitoring equipment. The signals required for the external avtivation of the pump can be simple voltage-free closing contacts from water meters or controllers or analog 0(4)...20 mA signals.
|
|
Beinlich is now supplying a customer with high-precision metering pumps for applying beads of silicon sealant and for bonding housing components together. In two-component systems, the pumps are used for media with viscosities from 5 mPas up to a highly viscous 1,000,000 mPas and reach precisions of over 90 percent at high pressure after just two revolutions. This precision, which even Swiss watchmakers can only dream of, is achieved using the latest Beinlich gear technology.
In the two-component systems, two of these metering pumps ensure the ideal mixture ratio using different volumetric displacements and different speeds for bonding plastic parts, filling with resins, or applying sealing compound.
|
|
Model Number MCP-50
Dimensions（mm）φ26xH63.5
Maximum Pumping Volume 50μl/cycle
Adjustable Pumping Volume Range 5～50μl
Maximum Operating Frequency 4Hz
Repeated Pumped Volume Accuracy ±1%(15～50μl),±2%(5～15μl)
Port Connection M6 , 1/4-28UNF
Ambient Temp. Range 10 - 40
Fluid Temp. Range 10 - 40
Voltage 12VDC , 24VDC
Power Consumption 4.4W
Duty Cycle Continuous
Insulation Class B
Dielectric Strength AC1500V 60s
Wetted Materials PTFE (POM or PP) , FPM
|
|
Process metering pumps
Process metering pumps are used in all applications where corrosive, toxic and flammable liquids are metered under very high pressures and extreme temperatures. They are e.g. used in the chemical industry, petrochemical industry, refineries as well as oil and gas production or as special metering pumps in the process industry.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
|
For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing.
|
|
|
|
|
|
DosiPump DP1000
The Dosi-pump system was designed to be flexible and reliable versus current pumps in the market. The unit is user friendly and engineered for batch or continuous operation with minimal down time.
Dosing pumps are convenient expulsion pumps that are used to introduce fluids into any vessel. Dosing pumps are frequently use for dosing rough materials, acids, adhesives, chemicals, hazardous materials, liquid , agar or lubricants. Dosing pumps are also used to move gasoline, diesel fuel, and oil sludge, slurry gas and rendering wastes.
Dosing pumps are obtainable with lots of features and can transport media / agar either upright or parallel. Adjustable speed pumps can operate at speeds selected by an operator nonstop & maintain performance specifications at 100% cycle.
Features and Benefits
> Easy operation software operates with a touch screen.
> Anti-Drop, drip suppression by retraction of pump movement
> Dual head pump for smoother liquid / agar filling
> Pump offers high flow rates of up to 1,000 ml/min.
> Easy Volume and speed calibration
> Backlight graphics display for easy reading
|
|
Suitable for Gas-forming liquid such as Sodium Hypochlorite and Hydrogen Peroxide.
To prevent unstable operation owing to these gases, the suction port is located in the upper position and the vent connection is furnished at the top of the pump chamber.
|
|
|
Reciprocating controlled volume pumps are widely used in the petrochemical and water treatment industries where a high degree of accuracy and reliability under a range of conditions are required. Various types are available to meet the diverse demands of many processes.
|
|
|
|
|
|
* Doubled walled stator design eliminates need for a universal joints or coupling rod.
* Available in Cost effective, portable-closed coupled (Motorised) design or Bare shaft design for flexibility of use of drives e.g. Mechanical speed variators, Diesel engine etc.
* Can be adopted for solar power motors.
* Suitable for metering, dosing with 90 to 95 % accuracy.
* Ideal Pump for the Australian and New Zealand Market.
Fluids Handled / Applications
Domestic – Cellar drainage, septic tank cess pit emptying, garden sprinkler systems, garden reticulation, water supply sampling from spears, wells, streams, dams, creeks, shallow bores and rivers and especially if the water is silted or sandy.
Industrial – General purpose pump for Wine, Beverage, Weak Acids & Alkalis transfer, sump duties, septic and sullage disposal, brine injection, spear point, Diesel, Lubricating Oil, Water Based Inks, Vegetable Oils, Plating Solutions, Fluids with suspended solids e.g. Dirty water from cesspools, Domestic water transfer.
Agriculture – Irrigation, Cattle Manure and like.
|
|
Pulseless series is designed to be almost nothing of any pulsation with high accuracy by special cam and check valves.
Compact design achieved by the cylindrical cam which drives two plungers.
|
|
The QDX High Flow Hazardous Duty pump is designed for use in commercial, industrial, and laboratory hazardous applications. Accommodates flows up to 2200 ml/min. The QDX utilizes the FMI Adapter Kit P56C and a Class I, Group D, Class II, Groups E, F, and G, NEMA frame 56 face-mount motor.
The QSYX Low Flow Hazardous pump is coupled to Class I, Group D, synchronous motor for the ultimate stroke to stroke accuracy. Accommodates flows up to 92 ml/mim.
|
|
| ... products without technical information |
| |
|
|
