|
|
New PC software platform for all alignment systems
Alignment CENTER is the single software platform for all current PRÜFTECHNIK alignment systems. It supports shaft, straightness and flatness applications. The software possesses a database structure with wide ranging “Sort” and “Search” functions. Alignment CENTER also allows the backup of measurement files and the detailed preview of measurement results and general file information. Measurement files may be edited as necessary and professional measurement reports generated.
|
|
The LZ-NET series is intended to protect Local Area Networks (LAN) from over voltage surges and electrostatic discharges created by switching transients in buildings. LAN systems are particularly prone to such disturbances because of the often long cable lengths involved which behave like antennas to such atmospheric disturbances.
It provides protection to all 8 lines in the UTP, and is Cat. 5 capable.
- Compact, Ergonomic Packaging
- All 4 Pairs Protected
- Freq: < 100 MHz, Cat. 5 Capable
- Termination: RJ45, Cat. 5 Connectors
|
|
Mecmesin offer a range of sophisticated Computer-controlled Test Frames. The Multi-test-i is available in a range of capacities to accommodate all your testing requirements, from the entry level MultiTest 1-i through to the advanced twin column test frames that have been specifically designed to test large or high load samples or products.
Intelligent loadcells mounted to the test frame allow the MultiTest-i to download data directly to a PC via the serial port at a rate of 2000 times a second. If your test requirements change then the MultiTest-i can easily be upgraded with a different load cell that meet your new testing requirements.
Emperor, Mecmesin’s powerful yet user-friendly control software, provides both a simple platform for routine analyses on the factory floor, as well as an advanced platform for sophisticated laboratory test routines. Programmable functions include running a test to a pre-determined force/torque, displacement, time or to break, as well as graphical interrogation of results.
Applications
The MultiTest-i range of motorised test stands can be used for many different applications including:-
Compressive testing
Deformation testing
Extension testing
Materials testing
Medical device testing
Packaging testing
Spring testing
Tensile testing
Textile testing
Top-load testing
Mecmesin offer a wide range of standard grips and fixtures, to hold your specimen. Alternatively, a custom-built fixture can be designed for your specific application. |
|
Liebert XD™ System
Liebert energy-efficient and flexible high heat density cooling solutions are available with Open or Closed architecture and Pumped Refrigerant-based or Water-based technology.
Liebert XD refrigerant-based cooling modules work as a system to support the hot aisle/cold aisle approach to cooling high heat density data centers. The modules provide focused rack cooling, enhancing a room precision cooling unit, such as a Liebert DS system. Pumped refrigerant is ideal for use around electronic equipment, operating at low pressure in the piping circuit, and becoming a gas at room conditions. |
|
Features
1U Compact Keyboard Drawer with 15" LCD (optional 17", 19", & 20.1LCD)
Industrial Grade 106-key keyboard and touchpad (optional Cherry keyboard and trackball).
SUN system keyboard and touchpad version is also available.
Rail-Lock Switch for maximum safety.
New rail design to enable single person to install the console into the rack.
OSD for control over display quality.
Built-In low power consumption power supply.
Specifications
-Heavy Duty Steel
-Color Black
-LCD 15" TFT/LCD with 200 nits brightness (Optional 17", 19", & 20.1").
-KVM Interface: 15pin DB type female connectors (VGA, PS/2 keyboard and PS/2 mouse male connectors at the platform side)
-Keyboard and Mouse: PS/2 106 keys keyboard with touch pad (Optional Cherry keyboard and trackball)
-Industrial level Auto-switching power supply for 85V~264V AC Input
-On-Screen Control: Auto adjustment, brightness, contrast, phase, H-V position, frequency, size, and display mode.
-Drawer Design: Full extension high load rating slide rail with rail-lock safety switch. Rail design enables single person do the installation.
-Front access lock for system security
Dimensions
15/17" version:
482mm(W) x 503.6mm(D) x 43.8mm(H)/19" x 19.8" x 1.72"
17 kgs/37.4lbs
19" version:
482mm(W) x 553.6mm(D) x 43.8mm(H)/19" x 19.8" x 1.72"
19 kgs/41.88lbs
20.1" version:
448.7mm(W) x 608.4mm(D) x 44 mm(H) / 17.7" x 24.0" x 1.7 " |
|
Features
Standard 19" Rackmount
15"/17"/19" TFT LCD Display protected by tempered glass
High contrast ratio and Wide-viewing angle
4-CCFL backlight lamps for high display quality
On Screen Display (OSD) enable easy adjustment of display image
Support Sun native resolution
Low power consumption
Robust but light and elegantly designed external housing
Optional Touch-screen function
Model: AURORA -B919, AURORA-B817 and AURORA-B815
19", 17" and 15"
Active Matrix TFT-LCD |
|
| CYCLOPS-B is a series of 19” 1U rackmountable KVM consoles. Two separate tracks for panel and keyboard allows users to choose the most comfortable visual distance by moving the LCD closer to or away along provided tracks. This feature also enables the extraction of only the LCD and monitor the activities of connected servers through the closed glass door of your rack. The utilization of a single DB15 connector input from each computer connected enhances the visual aesthetic by enabling better management of the cables at the back of the rack. Password function limits the access to all computers only to assigned person(s). This is a very crucial feature to prevent unauthorized/uncontrolled tampering of filesand data which can cause significant loss. All connected computers can be monitored comfortably using auto-scan function. On Screen Display provides you with control over frequency, resolution, backlight luminance and brightness of the video display. |
|
The MEDUSA-B series is designed to provide users with friendly and clear visual monitoring device that can be easily fitted onto standard 19” rack and takes only 1U space. The series supports 15” and 17” bright active matrix TFT LCD display in an elegantly designed 1U heavy duty steel housing with rail to enable users to select the most comfortable visual distance. The LCD supports wide viewing angle R-L and U-D up to 140 degree. Ultra excellent display quality is supported by a maximum contrast ratio of 500:1 and a resolution up to (SXGA) 1280 x 1024 pixels for 19” and 17” version. MEDUSA-B series also support Sun native resolution. It can be connected
easily to your computer through standard VGA interface.
Features
• Standard 19” Rackmount 15”/17” bright active matrix TFT LCD Display protected by tempered glass
• High contrast ratio, Wide-viewing angle and high brightness
250 cd/m2 from 4-CCFL backlight lamps for high display quality
• On Screen Display (OSD) enable easy adjustment of display
image
• Support Sun native resolution
• Low power consumption
• Robust but light and elegantly designed external housing
• Optional Touch-screen function |
|
| ... products without technical information |
| |
4 axis DC motors driver (Board for 4 axis DC motors)
Often to move an axis, extreme dynamic performances aren’t required so a DC motor with brushes could represent the best compromise for:
• Torque’s output linearity
• Positioning accuracy
• Dimensions
• Motor and driver’s low cost
Tex Computer’s multiplex driver can interface quickly any of our controller through Pwm signals on a connector for a 26 pin cable. Each of the 4 power stages with implemented Mosfet are protected from short circuits and capable to start motors with power up to 600 W per axis |
|
Box Solution (Numeric controller to connect to PC)
When a frequent use of CAD/CAM programs are required, it’s necessary to equip the machine with a PC. With a box solution, available for all Tex Computer’s products, it’s possible to use PC as interface man/machine committing to the controller all the automation problems in “real time”. Connection to PC can be either through Ethernet or RS232 serial port. |
|
Power T (6 axis numeric controller)
Ideal to manage pantographs for cutting, small working centres, Cartesian robots and SCARA. It’s available with display 6,5”, 8,4”, 10”, 12” and 15” with or without touch screen. Thanks to 3 CANopen ports, 2 serial ports with Modbus protocol and the possibility to manage up to 40 analog inputs with 12 bit resolution, it’s possible to automate stations for production automatic tests both in “Stand Alone” configuration that can be connected in Ethernet to PC that works as supervisor and data archive. |
|
Prodigy-PC/104 Motion Control Cards provide DC brushless, brushless DC, microstepping and step motor control. They communicate via a PC/104 bus, CANbus or serial port. PC/104 cards are used in embedded systems for industrial control, automation and robotic applications. The Prodigy-PC/104 Motion Cards are as available in 1, 2, 3, & 4 axis versions, and use the advanced Magellan Motion Control IC. Navigator-PC/104 cards are available in 1, 2, 3 and 4-axis configurations and use PMD's Navigator chipset . All PC/104 cards come equipped with Pro-Motion® software, a WindowsTM GUI, and C-Motion®, an Application Programmer's Interface (API) comprised of a C-source code library for developing applications in DOS or Windows environments.
|
|
| Galil offers a complete line of single and multi-axis controllers for stepper and servo motors. Interfaces include PCI, ISA, PC/104, cPCI, VME, USB, RS232 and Ethernet. Modes of motion include point-to-point positioning, jogging, linear and circular interpolation, contouring, ecam and electronic gearing. Also programmable I/O for interface to external sensors. |
|
| ... products without technical information |
| |
Remote terminal (Transportable numeric controller)
Ideal solution for the user who needs to be near the organs on motion during machine’s tooling. The wide 8.4” touch screen display is managed directly by the graphic board on the controller using a LVDS interface which allows to remote the terminal maximum 10 metres. The terminal has an emergency button with double contact, “dead man” button, a switch with key and flexible multipolar cable for mobile laying. Potentiometer to adjust axis overfeed on request. |
|
Power C (12 axis numeric controller)
Thanks to its calculation unit in Floating Point 64 bit implemented on the hardware, this is the ideal controller to manage applications which require high accuracy.
It’s available with display 8,4” , 10” and 12” with or without touch screen. |
|
| ... products without technical information |
| |
Power E (4 axis numeric controller)
Cheap solution “All In One” achieved with a coloured touch screen interface for low budget applications. Available with display 6,5”, 8,4”, 10”, 12” and 15” with or without touch screen. Besides axis it can manage “on board” up to 48 digital I/O and 12/12 bit analog inputs all in a very compact electric board. At the moment, it’s the only Tex Computer’s controller with USB interface integrated. |
|
Microvision Plus (3 axis interpolated controller)
All the power of a numeric controller with ISO programming in a cheap structure based on a RISC 16 bit processor. Monochromatic 5” display can be touch screen which improves navigation making it more user friendly. Drivers can be connected to the controller either through analog +/-10 V. signals or digital PWM or Step / Direction. Besides a considerable number of I/O “on board” many other devices can be added or remoted using the 2 available CANopen serial ports. |
|
CHARACTERISTICS:
QUINN PC sheets have excellent optical properties and a
brilliant surface. The QUINN PC range contains sheets that are
easy to fabricate and show exceptional performance at both
low and high temperatures (range from -40°C to +135°C).
Important benefits of QUINN PC sheets are their excellent
mechanical, thermal and electrical properties.
They are virtually unbreakable in normal use. |
|
The Dytran pressure sensor model 2180C is a high intensity acoustic sensor ideal for measurements involving gas turbine combustor dynamics. It features a top TNC electrical connector, a 1-1/8-12 mounting thread, and a stainless steel diaphragm. The 2180C has a charge sensitivity of 700pC/psi and a range of 10 psi (191dB). This all-welded stainless steel sensor can monitor pulsations, turbulence, a noise in hydraulic and pneumatic systems as well as detect pressure fluctuations in exhaust systems, compressors, turbines, pumps and pipelines. To learn more about the 2180C, please visit the Dytran website or email us.
Key Features
- Top TNC connector
- 700pC/psi sensitivity
- 10 psi (191dB) range
- Charge mode
- Can operate up to +400°F
- All stainless steel construction
- Hermetically sealed
Potential Applications
- Gas turbine combustion dynamics studies
- Pressure fluctuation measurements in exhaust systems, compressors, turbines, pumps and pipelines |
|
|
|
