|
|
With MCA/CMM Reporting you can forget measurement reports printouts. CMM Reporting summarizes huge amounts of data being generated from CMMs to be immediately viewed at a single observation station.
Utilizing an ‘expert system’ principle, summary graphics and results are used that can be ranked and compiled with historical data and internal quality plans. Custom criteria for exceptions can be set as well as having specific graphical reports for certain features.
Used extensively by the automotive industry to replace the SPC portion of user interfaces like Zeiss Calypso, Marposs QuickSPC and Hexagon PC-DMIS it offers commonality in your SPC and Reporting environment. |
|
The WinTest® DMA application software meets the challenges of Dynamic Mechanical Analysis (DMA). When coupled with special fixturing, such as environmental chambers and our new DMA tensile grips, our ElectroForce® series of test instruments are the ideal platform for advanced viscoelastic property measurement of:
- Elastomers
- Biomaterials
- Gels
- Foods
- And more! |
|
OptiPlan is a CogniTens professional software product used for planning, defining and preparing comprehensive dimensional measurement programs for execution by Optigo & OptiCell dimensional measurement platforms.
OptiPlan allows planning multiple sets of measurement programs and optimizes utilization of Optigo/OptiCell platforms by providing the operator with the exact information for carrying out the measurement.
Using OptiPlan the engineer can easily define measurable features, set multiple alignment guidelines, capture GD&T requirements, and prepare reporting templates for later use. |
|
The qs-STAT Measurement system analysis module gives you every tool you need to successfully carry out you gauge system qualifications.
Gauge capability and GR&R studies are key to any successful process or 6sigma study. This qs-STAT module calculates to standard (AIAG, VDA, etc) rules and also offers unique methods for special conditions. |
|
HBM has specialized in measurement technology for over 50 years. Our products span the entire measurement professional chain from sensor to professional software.
The catman® measurement system is a flexible and powerful professional standard software suite for capturing, displaying, analyzing and documenting measurement data. It is available in three versions:
catman®AP - the new generation of DAQ and metering software
Benefit from the new generation of software. catman®AP bundles highly efficient modules for many different measurement tasks. Each module is a champion in its specific field of application. The modules in combination provide a flexible, powerful, and networked high-performance package – catman®AP
catman®Professional
catman®Professional is the complete solution for measurement engineers. The catman®Professional package is ideal for solving complex measurement tasks. Among other things it includes over 400 post-process analysis functions, an ActiveX® professional interface and an catma® Script editor for developing customised applications.
catman®Enterprise
catman® Enterprise permits comfortable handling of high channel-count systems ranging up to 10,000 channels.
|
|
| CoreView Lite is a free CogniTens software product used for viewing measurement results produced by CogniTens' Optigo and OptiCell. CoreView Lite empowers a large community of users to leverage rich and meaningful dimensional measurement information to improve quality and overall performance throughout the design, engineering and manufacturing processes. |
|
| Feature-oriented Calypso® software offers all standard interfaces. Results can be transferred to SPC software; automatically generated measurement plans exported to other industrial measuring machines. Non-Zeiss industrial measuring systems can also be operated with the Calypso DME client provided they are equipped with a DME server – even articulated arm measuring machines, laser trackers and computed tomography systems. More information on Calypso, Holos®, Pi-Web and other software from Carl Zeiss is available here. |
|
testXpert® II - Intelligent and Reliable
The New Software Generation for Materials Testing
Zwick Roell has set the standard with testXpert® for intelligent materials testing software. Unlike other software testXpert® has a standardized operating surface for all of its applications, no matter whether static or dynamic tests - so you spend less time learning to handle software and more time conducting tests. With testXpert® II you benefit from over 80 years of testing experience and from over 10,000 successful installations worldwide. |
|
Compatible with a large rang of measuring equipment
>> DCC CMM and Manual CMM
>> Articulated arms
>> Laser tracker
Fully Integrated geometrical and shape measurement in one simple user interface.
Compatible with the DMIS 4.0.
Comparison to CAD model IGES, VDA, CATIA V4/V5, Pro-E, Unigraphics ...
Surface, edge, curve and flush&gap measurements
Tube analyser (length, radius, bending angles & length control, graphical display...)
Off-Line and On-Line Graphical programming - Machine simulation
Collision Detection - INCA3D detect collision in Off-line programming, but even in real execution INCA3D will STOP your machine to avoid collision beetween your probe and your part.
|
|
SLM & SPM; PC based Soundlevelmeter & Soundpowermeter in real time.
Based on DASYLab ROGA-Instruments offers modules for SLM and SPM.
Independent of the selected measurement hardware the sound level module (sound level metering) calibrates according to DIN IEC 60 651 & DIN IEC 60 804 when used with DASYLab. The commonly used weighting professional filters S, F, I, Leq, A, B, and C and a 10 kHz high pass filter is available so even with a sound card measurements can be made which conform to the standard.
The level values measured with the sound meter can now passed over to the sound pressure meter in multi channel form. After applying the envelope method the sound pressure values can be output online (i.e. Lw(A)).
|
|
National Instruments increases your productivity in developing test, control, and design systems by providing professional software products for a wide range of functionality.
Long-term software compatibility and flexibility with emerging technologies
Rapid application development using interactive and programmatic tools
Compiled execution for higher performance
Lower cost of ownership with flexible software
|
|
PCDMIS portable version,3D measuring software.
PORTABLE MEASUREMENT DEVICES ARE CHANGING THE WAY MANUFACTURERS MONITOR THEIR OPERATIONS. NOW, INSTEAD OF HAVING TO MOVE THE PARTS TO THE MEASUREMENT MACHINE, USERS MOVE THE MEASURMENT MACHINE TO THE PARTS SAVING TIME AND PROVIDING IMMEDIATE FEEDBACK ON THE STATE OF THEIR PROCESSES. HOWEVER, USING THEM TO THEIR FULLEST REQUIRES SOFTWARE TO MATCH THEIR CAPABILITIES.
PC-DMIS PORTABLE DOES JUST THAT. IT IS AN ADAPTATION OF PC-DMIS THAT PRECISELY TAILORS THE CORE PRODUCT FOR USE ON PORTABLE CMMSWITHOUTCOMPROMISING CAPABILITY. IN ADDITION, IT ADDS NEW FEATURES THAT CHANGE THE WAY CUSTOMERS USE PORTABLES.
AN APPLICATION SPECIFIC USER INTERFACE MAKES THE SOFTWARE EASY TO USE FOR PROGRAMMERS AND OPERATORS ALIKE. ON PORTABLE ARMS, IT INTEGRATES MOUSE OPERATIONS WITH ITS UNIQUE “ARM AS MOUSE” MODE.
PC-DMIS PORTABLE OFFERS A FULL RANGE OF ENHANCED SCANNING AND SHEETMETAL FUNCTIONS AND IT INCLUDES AMONG ITS MANY FEATURES AN “AUTO-ZOOM” FUNCTION, WHICH AUTOMATICALLY PROFESSIONAL ZOOMS IN AND OUT BASED UPON THE DISTANCE FROM THE FEATURE OF INTEREST. IT IS TRULY A NEW TAKE ON PORTABLE MEASURMENT.
|
|
G-Pad is a user-friendly 3D geometric software especially dedicated to standard applications in the workshop:
- Assembling line measurement
- Tool control
- Part setup
- Reverse engineering
No particular metrology knowledge required; Easy-to-use interface for a quick set up.
G-Pad software allows to create theoritical geometric entities (Plane, Line, Point, Set of points, Circle, Sphere, Cone, Professional cylinder, Length, Angle and
Tube), to measure and to get GD&T by comparison.
Automatic customised Excel®report professional generator
|
|
ATEasy is a rapid application development framework for functional test, ATE, data acquisition, process control, and instrumentation systems. ATEasy provides all the necessary tools to develop and maintain professional software components, from instrument drivers to complex test programs. It is designed to support and simplifies ATE projects with long life cycles. With ATEasy, test applications are faster to generate and easier to maintain.
|
|
eZ-TOMAS
Machine Vibration Professional monitoring software
for the 600 Series, WaveBook/516E,
and ZonicBook/618E
eZ-TOMAS is the economical solution to rotating machine monitoring and analysis. eZ-TOMAS will continuously monitor your machines. eZ-TOMAS records the change in vibration condition, and quickly provides you with the information you need to make critical decisions.
Key Highlights
• Transient and Steady State rotating machinery analysis
• Easy-to-use graphical user interface and multiple project configurations provide fast setup
• Up to 20 kHz Analysis Frequency, with up to 25,600 lines of resolution
• Field expandable from 8 to 56 channels
• Overall, spectral amplitude, and phase gauges with peak hold indicators
• Spectral limit checking, with output industrial relays and alarm event logging
• Limit sets for specific RPM ranges
• Event data storage based on user defined triggers, with automatic backup
• Rotating Machinery Analysis: Time Waveform, Orbit, Spectrum, Waterfall, Polar, Bode, Shaft Center Line, and Trend professional displays
• Machine and Professional bearing Fault analysis and limit checking
• Save/Recall display setups with up to 8 display windows, and multiple overlays
• Integration and differentiation for acceleration, velocity, and displacement inputs
• Harmonic, Sideband, and Peak cursors for time waveform and spectrum displays
• Statistical analysis report with automatic limit generation
• Generate production test cell reports
• Export data to Excel®, UFF Type 58 Binary, or ASCII format
• Copy/Paste graphs and data into Microsoft® applications |
|
National Instruments increases your productivity in developing test, control, and design systems by providing professional software products for a wide range of functionality.
Long-term software compatibility and flexibility with emerging technologies
Rapid application development using interactive and programmatic tools
Compiled execution for higher performance
Lower cost of ownership with flexible software |
|
The automatic testing apparatus ion software MILAN® supports field bus couplers with SPS function in the new version now. In interaction with these units economical industrial test systems can be realized, which unite the flexibility of MILAN® with the safety engineering of SPS systems. Straight ones for small test systems cannot be implemented on the SPS Feldbuskoppler basis automation and measurement data recording and become it further units necessarily.
|
|
CoreView Pro is a powerful CogniTens software product used for viewing, analyzing and reporting dimensional measurement information. CoreView Pro enables viewing, analysis, reporting and enterprise wide collaboration based on common dimensional measurement information generated by Optigo and OptiCell dimensional measurement platforms.
CoreView Pro allows remote viewing and analysis of actual shop floor parts as well as assembly and tool measurements as soon as they are produced. CoreView Pro requires no post processing of data before use and automatically presents detailed analysis and comparison with nominal data and design intent.
CoreView Pro provides various part and process analysis tools to evaluate stability and conformity of manufacturing processes as well as unique engineering tools such as Master Part generation and tolerance adjustment. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
