|
|
|
|
|
|
With Q-DAS' popular procella SPC software, measurement and inspection data can be quickly acquired either by manual input or on-line, via the serial interface of the measuring device. On-line visualization of the acquired data enables timely detection of trends and out-of-control conditions.
The user is therefore in an excellent position to initiate timely corrective action. Data are checked against individually defined alarm thresholds (violation of tolerance or control limits) as soon as they are collected. If an alarm occurs, the operator is required to acknowledge the alarm. Actions taken, events and causes can be documented.
The user can be required to enter supplementary data (cavity, machine, batch, etc.), which allows for traceability throughout, and for object-related analysis of relevant information.
In advanced enterprise solutions, integration via an IDI interface connection with SAP/R3 QM makes it possible to load inspection lots generated by SAP into procella for data acquisition. Once the examination is completed, the acquired data are transferred back to SAP. In this way, users can benefit both from the flexibility of procella in terms of data acquisition and on-line visualization, and the advantages of a centralized umbrella system such as SAP.
|
|
|
|
|
|
ProFicient is the latest version of our No. 1 ranked SPC software with new features and enhancements.
Making informed business decisions in real-time can be challenging. Thorough data analysis often occurs after products have already been produced, making it impossible to control quality during the manufacturing process. ProFicient™ is InfinityQS' industry-leading Statistical Process Control (SPC) software. It automates data collection and analysis on the plant floor, helping quality professionals make intelligent decisions to improve their manufacturing processes in real-time, before defects occur.
Robust Functionality
InfinityQS ProFicient suite of software provides extensive functionality, allowing you to chart and analyze data in a way that's most meaningful to you. Unlike other charting applications, such as Microsoft Excel, ProFicient offers unlimited data mining and sorting, so that your reporting options are virtually endless.
+ Advanced Control Charting Tools
Process Event Handling and
Sophisticated Comparative Analysis
Full support for FDA's 21 CFR Part 11
Lot Acceptance Sampling
Easy to Integrate, Implement and Use
ProFicient software can smoothly integrate into any manufacturing environment. A single setup supports hundreds of parts and machine tools, simplifying deployment and system management.
Project Based
Ease of Integration
User-Friendly Interface
Simple Data Acquisition
Database Independence
|
|
Infodream make enterprise level manufacturing information systems which allow you to utilise your valuable production data to improve productivity & reduce waste.
SPC Vision is a real time Data Acquisition and SPC Software system for collecting, analysing, reporting and managing shopfloor data across the complete business enterprise.
Developed with our prestigious industrial partners, SPC Vision is a user friendly and flexible system, packed with rich, useful, and most importantly relevant functionality focused on the end goal of process improvement.
Key Features
Business Integration
Compliance & Traceability
Real Time Data Acquisition (Process and Product)
Real Time SPC, Quality Analysis & Process Supervision
Robust & Comfortable HMI
Industrial Integration
Reporting
|
|
Wonderware's QI Analyst 8.0 real-time SPC software can give your production team the quality information they need to adjust process parameters on the fly, which can decrease costs and improve product quality. Traditional off-line SPC systems use historical process data and don%u2019t allow real-time corrections of process excursions.
QI Analyst software is an important part of Wonderware's software solutions for Production and Performance Management. Its comprehensive, real-time SPC monitoring keep Wonderware customers informed regarding developing product-quality problems.
|
|
Wonderware's QI Analyst 8.0 real-time SPC software can give your production team the quality information they need to adjust process parameters on the fly, which can decrease costs and improve product quality. Traditional off-line SPC systems use historical process data and don%u2019t allow real-time corrections of process excursions.
QI Analyst software is an important part of Wonderware's software solutions for Production and Performance Management. Its comprehensive, real-time SPC monitoring keep Wonderware customers informed regarding developing product-quality problems.
|
|
| ... products without technical information |
| |
|
|
|
|
Infrared thermography is an effective approach to non-contact measuring of temperature distribution for a range of applications. To use this approach also in industrial process control, InfraTec offers INDU-SCAN as a modular test system based on thermographic cameras for a variety of performance ranges for stationary applications.
The thermographic camera is installed in the immediate proximity of the process to be monitored. To withstand unfavourable environmental conditions, the camera unit can be protected with a housing and an air purge unit. To cover large monitoring requirements, the camera can be mounted on a pan/tilt head. Using digital data output is an excellent pre-requisite for flawless and long-term stable processing of all pixel temperature values of the image. The image can be synchronised with the process rate. Over a connection line with varying length, if required a glass fibre transfer line, the data is passed on to the evaluation unit based on an industrial PC with a colour display.
|
|
|
|
|
|
|
Raytek announces the launch of its new GS110 Infrared Thermal Imaging System for Low Emissivity (Low-E) Glass. This system is specifically designed to monitor one-side coated flat glass during the tempering process. The GS110 scanns the topside of the glass and measures simultaneously the temperature on the uncoated side of the glass where the emissivity is both known and significantly higher. The measured data are transferred to the Windows-based GS110 software which is included in the GS110 system. The software automatically corrects the thermal image of the topside of the glass to provide a more accurate result. Further, the GS110 allows the user to set-up predefined recipes to accommodate frequent product changes typical in glass processes. OPC server functionality is included as an integral part of the proprietary software allowing for seamless integration of the data into other process control software packages. By quickly detecting thermal irregularities within the glass and identifying defective heating elements, the GS110 allows glass processors to improve product quality and uniformity, and to reduce scrap. The GS110 can be used for non-contact infrared temperature measurement in other secondary glass-processing applications such as bending, forming, and annealing.
|
|
Small size. Big performance.
The XC-EI50/CE and XC-EI30/CE incorporate the latest 1/2 type and 1/3 type Interline (IT) CCD with near-infrared sensitivity. Sony surface mount technology results in an ultra compact, rugged unit that provides high quality images.
IR lighting has become very popular in machine vision applications. When used with an IR LED illuminator, these cameras can capture clear images because of their sensitivity at infrared wavelengths. In addition the XC-EI Series camera modules have high overall sensitivity. This makes them suitable for low light environments as well as for special IR lighting conditions.
A single standard 12-pin connector provides control of input/output signals as well as power.
The recommended camera adaptor for these units is the compact and lightweight DC-700/CE.
|
|
Iron and Steel Slag Detection System
The definitive infrared thermal imaging system for steel slag monitoring
When liquid steel is tapped from a basic oxygen or electric arc furnace, it is advantageous to minimise the quantity of slag carried over into the ladle.
Previously this has been done by visual observation of the tapping stream or by the use of electromagnetic induction coils mounted onto the furnace. However, neither of these methods has proved to be entirely reliable.
The LAND thermal imaging Slag Detection System SDS has been developed using LAND’s expert knowledge of the application and over 60 years of experience in the steel industry to monitor and aid control of slag carry-over from one process to another.
|
|
|
Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement.
|
|
|
|
|
|
|
Raytek announces the launch of its new GS110 Infrared Thermal Imaging System for Low Emissivity (Low-E) Glass. This system is specifically designed to monitor one-side coated flat glass during the tempering process. The GS110 scanns the topside of the glass and measures simultaneously the temperature on the uncoated side of the glass where the emissivity is both known and significantly higher. The measured data are transferred to the Windows-based GS110 software which is included in the GS110 system. The software automatically corrects the thermal image of the topside of the glass to provide a more accurate result. Further, the GS110 allows the user to set-up predefined recipes to accommodate frequent product changes typical in glass processes. OPC server functionality is included as an integral part of the proprietary software allowing for seamless integration of the data into other process control software packages. By quickly detecting thermal irregularities within the glass and identifying defective heating elements, the GS110 allows glass processors to improve product quality and uniformity, and to reduce scrap. The GS110 can be used for non-contact infrared temperature measurement in other secondary glass-processing applications such as bending, forming, and annealing.
|
|
Small size. Big performance.
The XC-EI50/CE and XC-EI30/CE incorporate the latest 1/2 type and 1/3 type Interline (IT) CCD with near-infrared sensitivity. Sony surface mount technology results in an ultra compact, rugged unit that provides high quality images.
IR lighting has become very popular in machine vision applications. When used with an IR LED illuminator, these cameras can capture clear images because of their sensitivity at infrared wavelengths. In addition the XC-EI Series camera modules have high overall sensitivity. This makes them suitable for low light environments as well as for special IR lighting conditions.
A single standard 12-pin connector provides control of input/output signals as well as power.
The recommended camera adaptor for these units is the compact and lightweight DC-700/CE.
|
|
Iron and Steel Slag Detection System
The definitive infrared thermal imaging system for steel slag monitoring
When liquid steel is tapped from a basic oxygen or electric arc furnace, it is advantageous to minimise the quantity of slag carried over into the ladle.
Previously this has been done by visual observation of the tapping stream or by the use of electromagnetic induction coils mounted onto the furnace. However, neither of these methods has proved to be entirely reliable.
The LAND thermal imaging Slag Detection System SDS has been developed using LAND’s expert knowledge of the application and over 60 years of experience in the steel industry to monitor and aid control of slag carry-over from one process to another.
|
|
|
Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement.
|
|
The forces which arise in industrial processes such a press-fit, punching or crimping often have implications for the quality of the final connection. Such forces can also be measured indirectly in terms of the strain occurring at the surface of the machine structure. This is often simpler than taking a direct force measurement, which requires the sensor to be built into the structure.
Kistler's new Type 9234A… strain transmitter with integral amplifier is fitted to the machine very simply by means of a single M6 screw. Thanks to its high sensitivity, accurate measurements are possible even with extremely rigid machine structures.
The robust transmitter is particularly suitable for use with presses and assembly line robots.
|
|
The forces which arise in industrial processes such a press-fit, punching or crimping often have implications for the quality of the final connection. Such forces can also be measured indirectly in terms of the strain occurring at the surface of the machine structure. This is often simpler than taking a direct force measurement, which requires the sensor to be built into the structure.
Kistler's new Type 9234A… strain transmitter with integral amplifier is fitted to the machine very simply by means of a single M6 screw. Thanks to its high sensitivity, accurate measurements are possible even with extremely rigid machine structures.
The robust transmitter is particularly suitable for use with presses and assembly line robots.
|
|
EPSIMETAL, SCAIME’s miniature strain sensor is available either with a high level output signal or with a direct strain gage output. Thanks to a patented mechanical device, installation and removing are made very easy, by means of screws or gluing, and the strain measurement is possible, from very low stresses up to 1000µm/m.
The amplified output version allows, by means of digital adjustment:
- Temperature compensation.
- Adjustable measurement range.
A watertight version is also available.
This is a perfect tool for load and force measurement or monitoring on existing structures and machines.
EPSIMETAL, used with EPSITRAC, offers a specially designed solution for the monitoring of molding machines and presses. It allows the measurement of tie bar stresses on die casting or plastic molding machines, or hydraulic presses. Periodic adjustment, as well as monitoring, is possible, with transportable or permanent installation.
|
|
The forces which arise in industrial processes such a press-fit, punching or crimping often have implications for the quality of the final connection. Such forces can also be measured indirectly in terms of the strain occurring at the surface of the machine structure. This is often simpler than taking a direct force measurement, which requires the sensor to be built into the structure.
Kistler's new Type 9234A… strain transmitter with integral amplifier is fitted to the machine very simply by means of a single M6 screw. Thanks to its high sensitivity, accurate measurements are possible even with extremely rigid machine structures.
The robust transmitter is particularly suitable for use with presses and assembly line robots.
|
|
EPSIMETAL, SCAIME’s miniature strain sensor is available either with a high level output signal or with a direct strain gage output. Thanks to a patented mechanical device, installation and removing are made very easy, by means of screws or gluing, and the strain measurement is possible, from very low stresses up to 1000µm/m.
The amplified output version allows, by means of digital adjustment:
- Temperature compensation.
- Adjustable measurement range.
A watertight version is also available.
This is a perfect tool for load and force measurement or monitoring on existing structures and machines.
EPSIMETAL, used with EPSITRAC, offers a specially designed solution for the monitoring of molding machines and presses. It allows the measurement of tie bar stresses on die casting or plastic molding machines, or hydraulic presses. Periodic adjustment, as well as monitoring, is possible, with transportable or permanent installation.
|
|
Process Control Center
Durability and high quality defines the Elabo programme of setting up process control rooms. We’ve even taken the transition into account: the building block system allows for the extension of an individual workstation solution with one monitor level to interlinked solutions with several monitor levels. Furthermore, all installation concepts are supported in a circle or circle sections. In order to handle the heavy workload at control stations, all workstations come complete with adjustable height, ideal for those departments operating on shifts. Based on the large number individual requirements specific to each customer, Elabo offers assistance in everything from function analysis, to the choice of appropriate furnishings, to turn-key handovers.
|
|
Lab-X3500 is a compact, reliable, affordable and easy to use XRF analyser. For those in the Petroleum sector the Lab-X3500 conforms to ASTM D4294, ISO20847, ISO8754 and IP336. In addition Oxford Instruments’ offers the
Lab-X3500S/Cl model using air path thereby avoiding the requirement for helium purge. For wood treatment, liquids and powders are measured with equal ease for Copper Chrome Arsenic (CCA), Copper and many others.
Our customers in the cement, minerals, mining and plastics industries all appreciate and benefit from XRF analysis delivered by such a small, compact package providing 24/7 peace of mind and ease of use by production staff.
|
|
|
|
see the results for the following category : 
