|
|
With MCA/CMM Reporting you can forget measurement reports printouts. CMM Reporting summarizes huge amounts of data being generated from CMMs to be immediately viewed at a single observation station.
Utilizing an ‘expert system’ principle, summary graphics and results are used that can be ranked and compiled with historical data and internal quality plans. Custom criteria for exceptions can be set as well as having specific graphical reports for certain features.
Used extensively by the automotive industry to replace the SPC portion of user interfaces like Zeiss Calypso, Marposs QuickSPC and Hexagon PC-DMIS it offers commonality in your SPC and Reporting environment. |
|
With Q-DAS' popular procella SPC software, measurement and inspection data can be quickly acquired either by manual input or on-line, via the serial interface of the measuring device. On-line visualization of the acquired data enables timely detection of trends and out-of-control conditions.
The user is therefore in an excellent position to initiate timely corrective action. Data are checked against individually defined alarm thresholds (violation of tolerance or control limits) as soon as they are collected. If an alarm occurs, the operator is required to acknowledge the alarm. Actions taken, events and causes can be documented.
The user can be required to enter supplementary data (cavity, machine, batch, etc.), which allows for traceability throughout, and for object-related analysis of relevant information.
In advanced enterprise solutions, integration via an IDI interface connection with SAP/R3 QM makes it possible to load inspection lots generated by SAP into procella for data acquisition. Once the examination is completed, the acquired data are transferred back to SAP. In this way, users can benefit both from the flexibility of procella in terms of data acquisition and on-line visualization, and the advantages of a centralized umbrella system such as SAP. |
|
The WinTest® DMA application software meets the challenges of Dynamic Mechanical Analysis (DMA). When coupled with special fixturing, such as environmental chambers and our new DMA tensile grips, our ElectroForce® series of test instruments are the ideal platform for advanced viscoelastic property measurement of:
- Elastomers
- Biomaterials
- Gels
- Foods
- And more! |
|
OptiPlan is a CogniTens software product used for planning, defining and preparing comprehensive dimensional measurement programs for execution by Optigo & OptiCell dimensional measurement platforms.
OptiPlan allows planning multiple sets of measurement programs and optimizes utilization of Optigo/OptiCell platforms by providing the operator with the exact information for carrying out the measurement.
Using OptiPlan the engineer can easily define measurable features, set multiple alignment guidelines, capture GD&T requirements, and prepare reporting templates for later use. |
|
eZ-Balance
Portable Machine Balancing Software for the
600 Series and ZonicBook/618E
Balance rotating machinery with eZ-Balance and the 600 Series or ZonicBook/618E. The combination of the 600 Series or ZonicBook/618E with eZ-Balance provides a powerful system for multi-plane (up to 7 planes) balancing applications. eZ-Balance computes the optimal balance weights and their locations, based on vibration data collected from the 600 Series or ZonicBook/618E. The data is displayed in a convenient Polar plot that indicates the magnitude and phase of the unbalance as well as time and spectrum data.
Key Highlights
• Multiplane trial and trim balancing
• Polar, time, and spectral displays
• Computes and stores influence coefficients for future trim balancing
• Vibration data can be collected by the 600 Series or ZonicBook/618E, or entered manually
• Balancing toolkit
- Trial weight calculations
- Weight splitting
- Centrifugal force
- Stock weights
-Weight removed
-Unbalance tolerance
• Balance solution can be based on multiple response points |
|
JOFRACAL calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermo-swithes, pressure gauges and pressure switches.
JOFRACAL software provides an entirely automatic calibration of sensors and a semi-automatic calibration of the complete process loop by means of a PC. The software handles the comparison between the process readout value and the reference value; a measurement typically required within ISO9000, GMP, or HACCP systems. Additionally, this evaluation may be performed on-site without electrical interruption of the loop.
A variety of screens presents the user with information in an easy-to-read format. This provides the technician with an optimal overview to allow for setting up calibration procedures and performing calibrations. Furthermore, JOFRACAL also includes facilities for generating and printing of detailed certificates. |
|
Who calibrated? What? When? What were the results? Plan, manage and document all your calibrations efficiently and safely by using Beamex's calibration software. In a Beamex calibration system the calibrator communicates seamlessly with calibration software.
Benefit from using Beamex calibration software:
* Easy-to-use, modern software
* Traceable and auditable calibration documents
* Paperless documentation
* Seamless communication with documenting calibrators
* Wide customization possibilities
* Extensive installation, training and after-sales services
|
|
FastCalXP Gauge Calibration Software
Calibration made simple.
- digitally record applied pressure eliminates data errors
- calibrate pressure chart recorder
- 10 point up and down calibration can be completed in less than 3 minutes
- wizards guide you for a fast and easy setup
- calibration reports are created in excel format and reminds you when the next calibration is due
Pressure is Our Business!
|
|
CitectFacilities integrates all your facilities systems, including HVAC, lighting, fire, CCTV and access control, across your entire enterprise to deliver a single facilities monitoring and control solution. The software can connect to hardware devices supplied from multiple vendors, in single or multiple sites.
What does this mean for you?
A single, central view of all facilities systems is essential for property owners and facilities managers:
PROPERTY OWNERS
CitectFacilities provides strategic information that lets property owners reduce facility operating costs and improve tenant service. Existing and future facilities equipment investments are protected and the high scalability provides a low risk, low entry cost option that lets you expand your facilities application according to your business plan.
FACILITY MANAGERS
Facility Managers gain real-time visibility of all facilities systems, including central alarm management, with CitectFacilities. This raises staff productivity and improves responsiveness to tenants. Open protocols and open architecture gives you the flexibility to integrate building automation technology suited to your facility. |
|
QC Softwares:
SpectraMagic NX
PaperControl
QTEX
Colour Matching: Ciba® COLIBRI
Instrument Control: Easy-Spectro-Checker |
|
CoreView Pro is a powerful CogniTens software product used for viewing, analyzing and reporting dimensional measurement information. CoreView Pro enables viewing, analysis, reporting and enterprise wide collaboration based on common dimensional measurement information generated by Optigo and OptiCell dimensional measurement platforms.
CoreView Pro allows remote viewing and analysis of actual shop floor parts as well as assembly and tool measurements as soon as they are produced. CoreView Pro requires no post processing of data before use and automatically presents detailed analysis and comparison with nominal data and design intent.
CoreView Pro provides various part and process analysis tools to evaluate stability and conformity of manufacturing processes as well as unique engineering tools such as Master Part generation and tolerance adjustment. |
|
The qs-STAT Measurement system analysis module gives you every tool you need to successfully carry out you gauge system qualifications.
Gauge capability and GR&R studies are key to any successful process or 6sigma study. This qs-STAT module calculates to standard (AIAG, VDA, etc) rules and also offers unique methods for special conditions. |
|
SLM & SPM; PC based Soundlevelmeter & Soundpowermeter in real time.
Based on DASYLab ROGA-Instruments offers modules for SLM and SPM.
Independent of the selected measurement hardware the sound level module (sound level measurement) calibrates according to DIN IEC 60 651 & DIN IEC 60 804 when used with DASYLab. The commonly used weighting filters S, F, I, Leq, A, B, and C and a 10 kHz high pass filter is available so even with a sound card measurements can be made which conform to the standard.
The level values measured with the sound meter can now passed over to the sound pressure meter in multi channel form. After applying the envelope method the sound pressure values can be output online (i.e. Lw(A)).
|
|
HBM has specialized in measurement technology for over 50 years. Our products span the entire measurement chain from sensor to software.
The catman® measurement system is a flexible and powerful standard software suite for capturing, displaying, analyzing and documenting measurement data. It is available in three versions:
catman®AP - the new generation of DAQ and measurement software
Benefit from the new generation of software. catman®AP bundles highly efficient modules for many different measurement tasks. Each module is a champion in its specific field of application. The modules in combination provide a flexible, powerful, and networked high-performance package – catman®AP
catman®Professional
catman®Professional is the complete solution for measurement engineers. The catman®Professional package is ideal for solving complex measurement tasks. Among other things it includes over 400 post-process analysis functions, an ActiveX® interface and an catma® Script editor for developing customised applications.
catman®Enterprise
catman® Enterprise permits comfortable handling of high channel-count systems ranging up to 10,000 channels.
|
|
| CoreView Lite is a free CogniTens software product used for viewing measurement results produced by CogniTens' Optigo and OptiCell. CoreView Lite empowers a large community of users to leverage rich and meaningful dimensional measurement information to improve quality and overall performance throughout the design, engineering and manufacturing processes. |
|
| Feature-oriented Calypso® software offers all standard interfaces. Results can be transferred to SPC software; automatically generated measurement plans exported to other measuring machines. Non-Zeiss measuring systems can also be operated with the Calypso DME client provided they are equipped with a DME server – even articulated arm measuring machines, laser trackers and computed tomography systems. More information on Calypso, Holos®, Pi-Web and other software from Carl Zeiss is available here. |
|
API and Metrologic Application Software
Metrologic is highly specialised in measurement software for dimensional measurement tasks as well as included services. The Metrologic Group was created in 1980 and its head office is close to Grenoble in Meylan, France. Customers are mainly large automotive and aircraft manufacturers and their suppliers, as well as measurement machine and measurement instrument manufacturers.
About Metrologic Software:
*
Metrolog is the standard software of many KMG and Laser Tracker manufacturers
*
Built-in DMIS V4.00 ability (Dimensional Measuring Interface Specification)
*
Measure from rule geometry and free form surfaces, profiles and slices
*
Compensation of KMG-Geometry by means of 21-parameter-error correction
*
Efficient report generator, statistics module
*
Export measurement results in various formats (DMIS, VDAFS, IGES, Excel, ...)
*
Metrolog provides a complete, interactive, graphic 3D user surface
Why API trusts Metrologic software
Metrologic software is considered as one of the most common software systems world-wide for the inspection of complex 3D geometry Many API customers have chosen Metrologic software in the past. The software system features a special API Laser Tracker interface. |
|
Intense international competition and cost sensitivity forces closer focus on shorter construction cycles and faster Quality Control inspection procedures to cut downtime. To achieve success under these conditions, you need the best help you can get.
Metrolog XG for Leica
Metrolog XG for Leica - Developed by Metrologic Group of Europe - The global 3D inspection software is a standard for measuring applications in automotive, aerospace and the general precision industry.
Axyz
The modular software for Leica Geosystems Laser Trackers, Industrial Total Stations and Industrial Theodolites for day-to-day shopfloor metrology as well as point-based build and inspect.
PolyWorks
PolyWorks %u2013 developed by InnovMetric Inc., Canada %u2013 is the leading software solution for high-end point cloud inspection and reverse engineering applications.
|
|
Communicate key characteristics and features to manufacturing, assembly and quality.
Once the solid model definition is created in NX the AIMS Metrology Application for NX is started to create a measurement plan for key characteristics and other features on parts and assemblies. The enhanced CAD file defines datums, tolerances, and specific features that need to be measured to ensure that a quality part or assembly is produced and shipped. After inspection the AIMS file contains the original geometry definition and the measurement points and deviations and their relationship to features. This updated AIMS file can be loaded back into NX for further analysis to help improve the build process. |
|
Data Acquisition and Supervisory Control System
Pages autoconfiguration for gammadue® and/or deltadue® instruments
Data acquisition and monitoring
Process operation
Wide library of drivers
Mimic and pre-formatted pages
Real time and historical trending
Powerful alarm handling
Flexible configurable reporting
Recipe management
Security levels for operator access
Ethernet TCP/IP networking
Data exporting to commonly used databases
|
|
Inspection equipment and processes are both undergoing rapid changes as companies move from using 2D drawings to CAD models as the preferred method for product definition. This change, coupled with the rising demand for companies to prove the quality of their products, has led to a growing demand for inspection methods that can be used throughout the prototyping, manufacturing and assembly chain. With these techniques, any problems can be highlighted earlier in the development process and so be corrected more quickly and at lower cost.
The increased demand for inspecting parts and tools at multiple times in multiple places within the manufacturing chain requires software products that can be used on a variety of different inspection hardware platforms including Manual CMMs, CNC CMM's, Inspection Arms, Optical MMs, Laser Trackers and Line Laser Probes as well as on Machine Tools. PowerINSPECT provides a common user environment across all these hardware platforms ensuring operators can work flexibly whilst keeping the cost of training at an minimum.
Benefits include:
- Comparison against all mainstream CAD formats
- Rapid alignment even for complex freeform shapes
- Inspection of user-defined sections
- The ability to inspect along the edge of a part
- Full Geometric Inspection capabilities
- Automatic creation of inspection features from CAD nominals
- A step by step Geometric Dimensioning & Tolerancing (GD&T) Wizard
- Point, wireframe and surface export for measured entities
- CAD manipulation - including surface offsetting (e.g. reverse side for sheet metal, spark gap for electrodes)
- Fully-customisable reporting in easy-to-understand formats |
|
Particle Analyzer is a program for image acquisition and documentation that also allows for interactive and automatic measurements.
The principal aims of Particle Analyzer are the easy solution of individual measurement tasks using a guided work procedure ("Wizard") and the automation of routine activities using so-called "projects".
In addition to these automated work procedures the program may also be operated interactively via the toolbar.
Particle Analyzer is outstanding, as it is extremely easy to use. This is achieved especially by quick help texts, that may be displayed for each function during the work-flow. Even as a newcomer to digital image analysis you will be able to achieve accurate, reproducible measurement results with Particle Analyzer in nearly no time.
|
|
RogaANA; NVH Analysis Software - ROGA Instruments covers with it any NVH analysis requirements within one software package.
This unique software was developed especially for the needs of NVH engineers.
ROGA Instruments covers with it any NVH analysis requirements within one software package.
• Signal Analysis
• Order Analysis
• Modal Analysis
• Operation Deflection Shape Analysis
• Machinery Diagnostics
• Machinery Observation
• Balancing of Inelastic Rotors
• Human Vibration Measurement
• Acoustic Level/Power
• Acoustic Intensity
• Interior Noise Measurement
• Noise emitted by acc. Road Vehicles acc. ISO 362
• Acoustic Camera
|
|
Sartorius ProControl for Windows®
…modular scale-up system for recording, monitoring, evaluating and archiving all quantitative and qualitative product, process and environmental parameters.
• Average weight control | SPC | Attribute testing | HACCP
• Ranges from stand-alone to network systems
• Solutions for every requirement
• Optimal central computer and workstation ergonomics
• The most advanced software platform guarantees a future-proof investment
Contact us for a free trial version. |
|
Easy… Intuitive…Powerful
Datapaq's software takes the data gathered by the data logger, quickly and easily interprets the information, and reports the analysis you need instantly. Wizards walk you through all the major software functions and simplify set-ups and analysis. All of the critical profile results are available on one easy-to-read screen.
For FREE software downloads, visit our website.
|
|
testXpert® II - Intelligent and Reliable
The New Software Generation for Materials Testing
Zwick Roell has set the standard with testXpert® for intelligent materials testing software. Unlike other software testXpert® has a standardized operating surface for all of its applications, no matter whether static or dynamic tests - so you spend less time learning to handle software and more time conducting tests. With testXpert® II you benefit from over 80 years of testing experience and from over 10,000 successful installations worldwide. |
|
eZ-TOMAS
Machine Vibration Monitoring Software
for the 600 Series, WaveBook/516E,
and ZonicBook/618E
eZ-TOMAS is the economical solution to rotating machine monitoring and analysis. eZ-TOMAS will continuously monitor your machines. eZ-TOMAS records the change in vibration condition, and quickly provides you with the information you need to make critical decisions.
Key Highlights
• Transient and Steady State rotating machinery analysis
• Easy-to-use graphical user interface and multiple project configurations provide fast setup
• Up to 20 kHz Analysis Frequency, with up to 25,600 lines of resolution
• Field expandable from 8 to 56 channels
• Overall, spectral amplitude, and phase gauges with peak hold indicators
• Spectral limit checking, with output relays and alarm event logging
• Limit sets for specific RPM ranges
• Event data storage based on user defined triggers, with automatic backup
• Rotating Machinery Analysis: Time Waveform, Orbit, Spectrum, Waterfall, Polar, Bode, Shaft Center Line, and Trend displays
• Machine and Bearing Fault analysis and limit checking
• Save/Recall display setups with up to 8 display windows, and multiple overlays
• Integration and differentiation for acceleration, velocity, and displacement inputs
• Harmonic, Sideband, and Peak cursors for time waveform and spectrum displays
• Statistical analysis report with automatic limit generation
• Generate production test cell reports
• Export data to Excel®, UFF Type 58 Binary, or ASCII format
• Copy/Paste graphs and data into Microsoft® applications |
|
Software »pilot 3.0«
Customized to meet your specific requirements
The »pilot 3.0« system of software modules, empowers you to select the optimum components and modules that will meet the specific requirements of your individual production processes. Therefore, »pilot 3.0« will remain streamlined and easy to operate and you will only need to invest in those functions that you really need, to achieve your specific application requirements.
»pilot 3.0« can be used from manual operations over automatic cutting edge recognition, up to 3-axes-CNC-controlled measuring operations. »pilot 3.0« is suitable for every application and especially recommended for automated manufacturing environments and/or a high number of tool changes. »pilot 3.0« is also used in tool inspection. |
|
SOFTWARE DESCRIPTION:
In the era of computerization, the user friendliness and the usability of the computer is very common aspect in the industry. Computers are widely used for the majority of the industrial applications. In order to use the benefit and power of the PC, Libratherm offers standard, customized and dedicated computer programs or the software which runs on the window based operating platform in connection with the various Libratherm make temperature and process controllers, programmers and Data loggers to monitor the online process behaviour. Though, various industrial well known SCADA software package also do the job of PC interfacing, we still prefer to offer our own dedicated DAS software for the reason of our ability of customization, low cost and modification of the required hardware to meet the end users applications - when compared to the SCADA package. The various microprocessor based instruments are interfaced with the PC on RS232 serial port or RS485 bus having MODBUS RTU or ASCII protocol.
DATALOG16 software – designed to interface with our DATALOG-16, monitors and displays the process value of all 16 channels – which are updated every 1 second. Facility to view the real time line gr | | |
