|
|
Description
ATEasy is a test executive and a rapid application development framework for functional test, ATE, data acquisition, process control, and instrumentation systems. ATEasy provides all the necessary tools to develop, deploy and maintain software components - including instrument drivers, test programs, user interface, as well as a complete and customizable test executive. It is designed to support and simplify ATE system applications with long product life cycles. With ATEasy, test applications are faster to generate and easier to maintain.
|
|
testXpert® II - Intelligent and Reliable
The New Software Generation for Materials Testing
Zwick Roell has set the standard with testXpert® for intelligent materials testing software. Unlike other software testXpert® has a standardized operating surface for all of its applications, no matter whether static or dynamic tests - so you spend less time learning to handle software and more time conducting tests. With testXpert® II you benefit from over 80 years of testing experience and from over 10,000 successful installations worldwide.
|
|
|
|
|
|
eZ-TOMAS
Machine Vibration Monitoring Software
for the 600 Series, WaveBook/516E,
and ZonicBook/618E
eZ-TOMAS is the economical solution to rotating machine monitoring and analysis. eZ-TOMAS will continuously monitor your machines. eZ-TOMAS records the change in vibration condition, and quickly provides you with the information you need to make critical decisions.
Key Highlights
• Transient and Steady State rotating machinery analysis
• Easy-to-use graphical user interface and multiple project configurations provide fast setup
• Up to 20 kHz Analysis Frequency, with up to 25,600 lines of resolution
• Field expandable from 8 to 56 channels
• Overall, spectral amplitude, and phase gauges with peak hold indicators
• Spectral limit checking, with output relays and alarm event logging
• Limit sets for specific RPM ranges
• Event data storage based on user defined triggers, with automatic backup
• Rotating Machinery Analysis: Time Waveform, Orbit, Spectrum, Waterfall, Polar, Bode, Shaft Center Line, and Trend displays
• Machine and Bearing Fault analysis and limit checking
• Save/Recall display setups with up to 8 display windows, and multiple overlays
• Integration and differentiation for acceleration, velocity, and displacement inputs
• Harmonic, Sideband, and Peak cursors for time waveform and spectrum displays
• Statistical analysis report with automatic limit generation
• Generate production test cell reports
• Export data to Excel®, UFF Type 58 Binary, or ASCII format
• Copy/Paste graphs and data into Microsoft® applications
|
|
- Long-term software compatibility and flexibility with emerging technologies
- High-performance compiled execution
- Lower cost of ownership
- Strong integration of software and hardware
- Rapid application development
At National Instruments, we not only understand the importance of software, but we also believe software is the foundation of your measurement and control system. Using National Instruments software, including our flagship product, the LabVIEW graphical development environment, increases your productivity in creating test, measurement, and automation solutions through data acquisition, data analysis, and data visualization. Because our software architecture incorporates each of our products, you can use these products separately or together to build your measurement and control system.
|
|
ImageController1 vision system
• 5 measuring results in seconds - independent from the operator
• Edge inspection for quality and wear checks
• Measuring programs for axial and radial runout
• More details (Link) http://ezset.info/index.php?id=88
|
|
|
Win3700 Software integrates computer technology for measuring spring and resilient materials characteristics. It features high-speed data acquisition to optimize the accuracy of test results. Win3700 Software is provided with all LINK testers that use a Model 3700 Display Module, and any Module upgrade to an existing LINK electronic tester. It operates on any computer running Microsoft Windows.
|
|
|
MTESTQuattro is ADMET's most advanced materials testing system for electrohydraulic and electromechanical testing machines. It features faster sampling rates (up to 1kHz), newer screen displays and easier and more flexible Cyclic Modified report writing and data handling capabilities. Its unique design consists of a PC based application program and an easy-to-install external interface box which makes MTESTQuattro ideal for new and retrofit installations. MTESTQuattro's flexible interface provides connectivity to virtually every load frame regardless of age, manufacturer or application. It's base configuration consists of load, crosshead position, axial strain, transverse strain and auxiliary input channels with options for three additional auxiliary input channels and servo control.
|
|
Software »pilot 3.0«
Customized to meet your specific requirements
The »pilot 3.0« system of software modules, empowers you to select the optimum components and modules that will meet the specific requirements of your individual production processes. Therefore, »pilot 3.0« will remain streamlined and easy to operate and you will only need to invest in those functions that you really need, to achieve your specific application requirements.
»pilot 3.0« can be used from manual operations over automatic cutting edge recognition, up to 3-axes-CNC-controlled measuring operations. »pilot 3.0« is suitable for every application and especially recommended for automated manufacturing environments and/or a high number of tool changes. »pilot 3.0« is also used in tool inspection.
|
|
Instrument Control Software
The only stand-alone software that captures, stores and analyzes test results
Analyze, retrieve and store data instantly with Autoware®, AR's electrical safety compliance testing software. Autoware S9870 is used in tandem with Associated Research's QUADCHEK II, HypotMAX, HypotULTRA III, HypotULTRA II, LINECHEK, and RUNCHEK series of instruments. Autoware control software provides the backup assurance manufacturers need to prove their equipment meets electrical safety requirements established by UL, CSA, IEC and other international agencies, and the European Norms such as the Low Voltage and Medical Directives.
|
|
| ... products without technical information |
| |
KRAL Volumeter® for research and production test stands. Laboratory measurement precision is achieved despite fast flow changes and fluid oscillations.
The ideal conditions at the Bureaus of Standards however show the potential of KRAL precision. The screw spindle-metering from the KRAL Volumeter is on one hand very robust and handles the oscillation from pressure waves. On the other hand, the spindles are very quick and can follow fast changes of the flow velocity. Optional pressure pulse compensation is available that detects transient fluid waves.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
Two types of capacitor can be differentiated for mains applications. X capacitors, where a breakdown of the capacitor due to lightning or switching transients would not lead to an electric shock hazard and Y capacitors, used in applications where capacitor breakdown could cause a dangerous situation.
EMC Partner capacitor test systems are used to simulate transient (impulse) and active flammability tests on both X and Y capacitor types over a wide range of values.
MIG0603CAP provides impulses up to 6kV, MIG1212CAP generates 12kV higher energy impulses and MIG1803CAP is used for active flammability testing.
Capacitor testing is performed on batches of 24 samples with all values being recorded. Capacitor test systems from EMC Partner can easily be extended to include automatic switching between samples and registration of test values.
|
|
High Voltage Test Devices
Whether as a stand alone system, or part of a fully automated test system – the Elabo High Voltage Test Device sets itself apart with its wide range of applications and versatility. All test systems come ready and equipped to handle most jobs, though they can be adjusted with the appropriate plug-ins to meet further requirements. In addition to automated use, which is controlled only through an interface, there are also models with integrated touch screens available. PC-Software packages are available to assist in the assembly of complex systems, which cover all the requirements of a modern testing facility (Test Plan Creation, Visualization, Documentation, Statistics, etc.).
|
|
SGDA impulse test systems can be used to generate impulse voltages simulating lightning strokes and switching surges.
The stage energy is 5 or 10 kJ. Max. charging voltage is 3MV.
Applications covered include testing according to IEC, ANSI/IEEE as well as other national standards. The basic system can be upgraded in various ways for special tests and for greater ease of operation. A number of additional circuits and components allow optimising the impulse test system for tests on different kind of high voltage test objects.
The generator is due to its unique, modular, patented structure (the D-shaped generator body also forms the enclorsure for the sphere gaps) perfectly suited for transportation and easy on-site erection. Also the internal inductance is the lowest ever built
|
|
For testing the insulating strenght of transformers, motors, electric
machines and electrical plants and equipment.
|
|
|
|
|
|
PART # SBS-IBEX
BATTERY DIAGNOSTIC TESTER
The new SBS-IBEX is a cutting edge digital battery diagnostic tester meeting all IEEE Standard Recommendations for all stationary applications such as telecommunication's back up power, utility switching power, uninterruptible power systems (UPS) and more. The new IBEX can measure the accurate internal resistance (R), voltage (V), temperature (ºC) with the world's first ripple-removing algorithm (KR PAT No. 0494489) within a short time (3 seconds or less) during flotation charge. The new IBEX has been in use worldwide with the utmost in satisfaction and reliability by end users.
The SBS-IBEX comes complete with Exmons Battery Management Software that allows the user to trend battery measurement data, export data to excel and/or create a full report with the click of a button. Note: Trended battery measurement data can detect impeding battery failures before a power backup is affected and with enough advance notice to replace the failing batteries.
ADDITONAL PARTS:
SBS-IBEX 4-PIN SET
SBS-IBEX ARM ROD
SBS-IBEX 4-POINT PIN PROBE
SBS-IBEX 2-POINT PIN PROBE
SBS-IBEX CLIP PROBE
SBS-IBEX DC CLAMP
SBS-IBEX POLY BAG
SBS-IBEX LI-ON BATTERY
SBS-IBEX SHUNT
SBS-IBEX CHARGER
SBS-IBEX CASE
|
|
The most frequent cause of damage in industrial electronic systems is overvoltages, caused either by switching actions in the equipment itself or by atmospheric discharges such as lightning. Low transfer impedance characterizes a current impulse and high transfer impedance results in a voltage impulse. To simulate both conditions, a Combination Wave Generator (CWG) delivers a voltage impulse into an open circuit and a current impulse into a short circuit. This is also known as a “Hybrid” generator.
Power network transients can be modified by the cable properties so that in a well protected domestic or commercial environment, the impulse energy adopts an oscillatory form at 100kHz. This is the “Ringwave”.
Surge testing is performed on power or communication networks, which require Coupling and Decoupling Networks (CDNs) to superimpose the impulses and provide protection for auxiliary equipment.
EMC PARTNER manufacture a range of surge generators up to 100kA and 100kV.
|
|
# B+K Precision Battery Capacity Analyzers tests Lead Acid Batteries and displays the batteries stored charge capacity as a percentage and displays both the loaded and un-loaded battery voltage. Models 601 and 602 can also display the battery under test’s internal resistance. These units identify batteries, which may be defective or deteriorated. They are perfect tools for testing battery back up systems for emergency lighting, alarm, sprinkler systems, UPS devices and any system using lead acid batteries to provide power. Works with 6V and 12V lead acid batteries
# Settable Ah from 1 to 100 in 1Ah steps (works best on batteries from 5 to 99Ah)
# Powered by the battery being tested
|
|
Testboy Profi LCD Plus
Two pole voltage tester with LC-Display
Display DC and AC voltage from 6V to 1000V Automatic measuring range selection.Single pole phase testing > 100V AC,Two pole phase sequence indication (R and L) Resistance testing up to 2000 Ohm Continuity testing up to 150 Ohm (acoustically) RCD – testing lever two button LED torch lamp
Easy operable click system to change the socket dimension from Schuko to CEE -Socket Special test tips applicable also for WAGO clamps Removable 4mm test tips adaptor Backlight lever sensor IP 65, dustproof and waterproof CAT IV 1000V IEC/EN 61243-3 (DIN VDE 0682-401) TÜV/GS tested and approved
5 years manufacturer’s warranty
|
|
The KD1E/15D is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 15kV.
The potential indicator displat is powered by an integral rechargeable battery and is supplied complete with battery charger and PH3 proving unit in a bespoke carrying case
|
|
Instantaneous check on battery deterioration. Model 3555 for compact storage batteries: portable telephones and similar applications
Model 3555: support for high-capacity batteries
Model 3555: for compact storage batteries (portable telephones)
The increasing importance of battery testing
Three-rank rating of battery state: Pass, Warning, or Fail
|
|
Digital, highly advanced, multi-purpose and smart Partial Discharge and Diagnostics System for on-line and off-line PD testing on power apparatus and high voltage insulation systems, for both in-house and on-site applications.
according to the standard IEC 60270, VDE 0434, ANSI as well as various IEEE standards
PD quality tests on high voltage equipment
PD diagnosis on developing insulating materials
Designed for on-site PD diagnosis tests as well as for manufacturing and research
PD fault location for power cables
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
