|
|
Description
ATEasy is a test executive and a rapid application development framework for functional test, ATE, data acquisition, process control, and instrumentation systems. ATEasy provides all the necessary tools to develop, deploy and maintain software components - including instrument drivers, test programs, user interface, as well as a complete and customizable test executive. It is designed to support and simplify ATE system applications with long product life cycles. With ATEasy, test applications are faster to generate and easier to maintain.
|
|
testXpert® II - Intelligent and Reliable
The New Software Generation for Materials Testing
Zwick Roell has set the standard with testXpert® for intelligent materials testing software. Unlike other software testXpert® has a standardized operating surface for all of its applications, no matter whether static or dynamic tests - so you spend less time learning to handle software and more time conducting tests. With testXpert® II you benefit from over 80 years of testing experience and from over 10,000 successful installations worldwide.
|
|
|
|
|
|
eZ-TOMAS
Machine Vibration Monitoring Software
for the 600 Series, WaveBook/516E,
and ZonicBook/618E
eZ-TOMAS is the economical solution to rotating machine monitoring and analysis. eZ-TOMAS will continuously monitor your machines. eZ-TOMAS records the change in vibration condition, and quickly provides you with the information you need to make critical decisions.
Key Highlights
• Transient and Steady State rotating machinery analysis
• Easy-to-use graphical user interface and multiple project configurations provide fast setup
• Up to 20 kHz Analysis Frequency, with up to 25,600 lines of resolution
• Field expandable from 8 to 56 channels
• Overall, spectral amplitude, and phase gauges with peak hold indicators
• Spectral limit checking, with output relays and alarm event logging
• Limit sets for specific RPM ranges
• Event data storage based on user defined triggers, with automatic backup
• Rotating Machinery Analysis: Time Waveform, Orbit, Spectrum, Waterfall, Polar, Bode, Shaft Center Line, and Trend displays
• Machine and Bearing Fault analysis and limit checking
• Save/Recall display setups with up to 8 display windows, and multiple overlays
• Integration and differentiation for acceleration, velocity, and displacement inputs
• Harmonic, Sideband, and Peak cursors for time waveform and spectrum displays
• Statistical analysis report with automatic limit generation
• Generate production test cell reports
• Export data to Excel®, UFF Type 58 Binary, or ASCII format
• Copy/Paste graphs and data into Microsoft® applications
|
|
- Long-term software compatibility and flexibility with emerging technologies
- High-performance compiled execution
- Lower cost of ownership
- Strong integration of software and hardware
- Rapid application development
At National Instruments, we not only understand the importance of software, but we also believe software is the foundation of your measurement and control system. Using National Instruments software, including our flagship product, the LabVIEW graphical development environment, increases your productivity in creating test, measurement, and automation solutions through data acquisition, data analysis, and data visualization. Because our software architecture incorporates each of our products, you can use these products separately or together to build your measurement and control system.
|
|
|
Win3700 Software integrates computer technology for measuring spring and resilient materials characteristics. It features high-speed data acquisition to optimize the accuracy of test results. Win3700 Software is provided with all LINK testers that use a Model 3700 Display Module, and any Module upgrade to an existing LINK electronic tester. It operates on any computer running Microsoft Windows.
|
|
|
MTESTQuattro is ADMET's most advanced materials testing system for electrohydraulic and electromechanical testing machines. It features faster sampling rates (up to 1kHz), newer screen displays and easier and more flexible Cyclic Modified report writing and data handling capabilities. Its unique design consists of a PC based application program and an easy-to-install external interface box which makes MTESTQuattro ideal for new and retrofit installations. MTESTQuattro's flexible interface provides connectivity to virtually every load frame regardless of age, manufacturer or application. It's base configuration consists of load, crosshead position, axial strain, transverse strain and auxiliary input channels with options for three additional auxiliary input channels and servo control.
|
|
Software »pilot 3.0«
Customized to meet your specific requirements
The »pilot 3.0« system of software modules, empowers you to select the optimum components and modules that will meet the specific requirements of your individual production processes. Therefore, »pilot 3.0« will remain streamlined and easy to operate and you will only need to invest in those functions that you really need, to achieve your specific application requirements.
»pilot 3.0« can be used from manual operations over automatic cutting edge recognition, up to 3-axes-CNC-controlled measuring operations. »pilot 3.0« is suitable for every application and especially recommended for automated manufacturing environments and/or a high number of tool changes. »pilot 3.0« is also used in tool inspection.
|
|
Instrument Control Software
The only stand-alone software that captures, stores and analyzes test results
Analyze, retrieve and store data instantly with Autoware®, AR's electrical safety compliance testing software. Autoware S9870 is used in tandem with Associated Research's QUADCHEK II, HypotMAX, HypotULTRA III, HypotULTRA II, LINECHEK, and RUNCHEK series of instruments. Autoware control software provides the backup assurance manufacturers need to prove their equipment meets electrical safety requirements established by UL, CSA, IEC and other international agencies, and the European Norms such as the Low Voltage and Medical Directives.
|
|
ImageController1 vision system
• 5 measuring results in seconds - independent from the operator
• Edge inspection for quality and wear checks
• Measuring programs for axial and radial runout
• More details (Link) http://ezset.info/index.php?id=88
|
|
| ... products without technical information |
| |
|
|
|
|
CERTIFIER® FA PLUS VENTILATOR TEST SYSTEMS
Certifier FA Plus is the full-feature system capable of testing virtually all models of ventilators: adult, pediatric, anesthesia, neonatal and high-frequency. It can also test a variety of other medical equipment such as anesthesia gas delivery machines, insufflators and oxygen concentrators.
The Certifier FA Plus ventilator test system's compact size makes this ventilator tester ideal for use in field service, biomedical shops, and manufacturing.
The fast response and bi-directional sensing sensors makes it capable of testing all types of ventilators including neo-natal and high frequency. This ventilator tester is designed to measure air, oxygen, and nitrous oxide flow and pressure in institutional, home care, field service, laboratory, and production applications.
Test Parameters:
- Flow
- Peak & Minimum Flow
- Volume (Inhaled and Exhaled)
- Minute Volume
- Low Pressure (Differential)
- Peak & PEEP Pressure
- Mean Airway Pressure
- Barometric Pressure
- Inspiratory Time
- Expiratory Time
- I:E Ratio
- Respiratory Rate
- Gas Temperature
- Oxygen Concentration (with optional 4073 Kit)
Applications:
- Testing ventilators
|
|
|
|
|
|
The MicroDock II is the world’s most advanced, compact and affordable automatic calibration, testing and data management system for portable gas detection equipment. Compatible with BW’s GasAlertMicro 5, GasAlertMicro 5 PID, GasAlertMicro, GasAlertMicroClip, GasAlert Extreme and GasAlertClip Extreme family, the MicroDock II is expandable to up to 10 docking modules (including up to 6 charging units).
- Fully automatic “hands-free” calibration & functional bump test
- Automatically verifies performance of audible and visual alarms
- No computer required
- Entirely self-contained
- Fully portable
- Lightweight and mobile
- Operates via line power or a set of four C-cell batteries
- Add additional self-contained docking modules to system via simple, plug-in connections-no external pressure transducers or gas lines necessary
- Simplify record keeping
-Verify proper performance
- Reduce maintenance costs
- Multiple MicroDock II systems can be connected via a LAN
- Multi-language support in English, French, German, Spanish, and Portuguese
|
|
The new CheckBox IMH automates the routine gas (bump) testing, calibration and management of Crowcon portable gas detectors and facilitates the traceability and routine maintenance of instruments. Capable of operating with up to 10 instrument interfaces, CheckBOx IMH is available for use with the Tetra, Triple Plus Plus and Gasman products.
* Automatic gas (bump) testing
* Automatic calibration
* Can use single gases or quad mixtures
* Up to eight gas inlets
* Five or ten instrument interfaces
* Accommodates pumped or non pumped instruments
* Data and event file uploading
* Stores and controls configurations
* Records all activities
* Provides reports and certificates
|
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
GasCal 1100 Gas Dilution Calibrator
The Ecotech GasCal 1100 Gas Dilution Calibrator performs precise
gas dilution calibrations, ozone analyser precision checks and gas
phase titrations using an optional internal ozone generator. It is
ideal for stand alone use or incorporation into ambient air or emissions
monitoring systems.
• Single and multipoint calibrations can be performed using precise mass flow controllers
• Perform gas phase titrations (U.S. EPA Method) and ozone precision checks using an internal ozone generator (option)
• Parameter setup and output via inbuilt LCD and keypad or an external PC
• External remote control possible via data acquisition system or suitable gas analyser
• Mass flow controller zero stability drift less than 0.6 % full scale per year
• Optional Carry case allowing the GasCal-1100 to be securely carried from location to location
• Optional purge facilitates flushing of calibration gas lines
|
|
PORTACOUNT® RESPIRATOR FIT TESTER
The PORTACOUNT® PRO and PRO+ Respirator Fit Testers Deliver Fit Testing You Can Trust.
Fit testing the right way means you’re improving your risk management program while providing the best possible protection for your workers. Equally important, you’re complying with all regulations. In fact, there are specific OSHA-accepted quantitative fit test protocols written for
PORTACOUNT fit testers in the OSHA regulations. The PORTACOUNT PRO Respirator Fit Tester is more than a piece of equipment. It’s peace of mind.
No other fit tester can quantitatively fit test all types of respirators – gas
masks, SCBAs, respirators, even N95 disposable (filtering-facepiece)
respirators. If the mask requires fit testing, count on the PORTACOUNT PRO+ fit tester to provide the fastest and easiest OSHA-accepted fit test method.
It’s More Than a Fit Test. It’s Someone’s Life.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Rack Mounting Applications
* The high I/O systems are ideal for rack mounting applications
* Can be used on a Vertical Hinged Mounting Frame to access wiring and instrumentation
* Time saving with rapid changeover
Pre-Wired InterConnect Adapters
* Pre-wired InterConnect adapters act as a compact funnel for wiring directly to VXI cards
* Plug the connectors on the back of the funnel to the VXI card and the test system is ready to use
* Different connector plates are available to cable out of the InterConnect Adapters
Standard ITA’s
* Buy our ITA’s with our standard enclosures, or attach them to your custom enclosure
* Guaranteed a precise fit to VPC receivers
* Have us customize our enclosure to fit your testing needs
Easy Wiring with Cable Assemblies
* Combine our VXI Pre-wired InterConnect Adapters with cable assemblies to have the most rapid setup time
* Cable Assemblies can be created by VPC based on your testing instrumentation needs
* Standard cables are also available
|
|
|
|
|
|
What if you could maintain and manage your fixedpoint gas monitor fleet without leaving your desk?
The advantages would be significant. Manually calibrating every fixed monitor in a facility is a time consuming distraction from your core business. The units may be in hard-to-reach places creating additional safety hazards. These and other obstacles make it difficult to follow industry best practices for routine testing and calibration.
iTrans™ DS2 Docking Station™ is the first system to automate calibration, record-keeping and instrument
diagnostics for fixed-point gas monitors. Hands-off maintenance and a snapshot view of your entire gas
monitor fleet allow you to:
• Maintain your gas monitors more safely, efficiently and reliably
• Increase equipment reliability
• Eliminate safety concerns
• Save money on calibration and testing
• Focus more resources toward your core business
A graphical user interface tool allows an administrator to view operations on each Docking Station from a network computer. From here, you can initiate calibrations and instrument tests remotely, print reports, set events, and run diagnostics for any or all instruments at any location.
The DS2’s flexible architecture minimizes installation costs, whether you’re managing one instrument or an entire fleet of fixed-mounted or portable instruments.
|
|
|
When low cost testing is most important, compact & inexpensive Simplex test kits permit anyone to make accurate on-site tests for Chlorine (DPD or Ortho-tolidine) and pH easily and quickly. Every Simplex test kit uses eight (8) built-in, guaranteed non-fading, color standards mounted in a durable, corrosion-resistant housing. All standards can be seen at a glance and compared directly to the color of the test sample. No color discs or slides needed. Readings are simple and foolproof. Each Simplex test kit comes complete with comparator, carrying case, reagents and instructions. No other test kits are easier to operate...or lower in price!
|
|
| ... products without technical information |
| |
|
|
|
|
* USBscope50 is a tiny PC based oscilloscope which connects via the USB port, combining the ease of use, portability and economy of PC based scopes with high performance normally associated with much larger bench oscilloscopes.
* USBwave12 is a new concept in USB function generator products. PC based function generators offer many user benefits including flexibility, ease of use and economy.
The USB interface has developed into probably the best and most widely implemented PC peripheral connection method and is a natural choice for the function generator.
* USBpulse100 is a new concept in USB Digital Pulse/Clock Generator products. PC based pulse generators deliver many user benefits including flexibility, ease of use and economy. They are an invaluable tool during design and debug of digital circuits and can be used to quickly test the behaviour of a circuit under different input frequency and duty cycle conditions.
* USBcount50 is a PC based frequency counter designed for maximum flexibility, ease of use and economy. It is an invaluable tool during design and debug of digital circuits and can be used to quickly to verify generated frequencies, pulse widths and duty cycles.
|
|
|
|