|
|
Digitronic Indicator - 405 Series
Direct Inch / Metric conversion
58mm dial face
Lugback and 8mm stem mountings
Resolution 0.01m/0.0005"
Absolute / Incremental reading
Floating Zero
|
|
|
The Gauge Buster Load, Stress and Load Rate Indicator is designed to replace dial gauges on materials testing machines. Features include an industry first Auto-Test-Reset mode for hands free operation, bar graph load rate display, permanent storage of test results and easy transfer of results into data base programs. The Gauge Buster LP offers all of the features of the standard Gauge Buster plus the addition of a second digital encoder input for measuring piston/crosshead travel. During each test, the Gauge Buster records load, displacement, time data and can be configured to display piston/crosshead travel rate. After each test has completed, the recorded data (XY data and results) can be downloaded to a PC with ADMETs WinCOM/WinCOM Plus Data Communications Program for further review and analysis. The Gauge Buster LP is sometimes used for soil/asphalt compaction.
|
|
Slim Type ABS Digimatic Indicator ID-N/ID-B:
- Slim 35 mm wide body greatly enhances application range.
- Various features including waterproofness, display inversion, and back plunger.
ABS Digimatic Indicator IDS: Simplified economy type with a single function.
ABS Digimatic Indicator IDU: Single-function, economy type with a measuring range of 25.4 mm.
ABS Digimatic Indicator IDC:
- Widely used as a general-purpose, multifunction indicator
- Model provided with various measuring ranges, measuring forces, etc.
|
|
Digital Indicators
* Inch / metric
0-12.7mm (0-0.5") measuring range
0.001mm (0.00005") resolution
* Zero / on / off
Zero setting at any position / manual
power on / off
Rotating bezel 330 degrees
* Data hold
* TOL Set tolerance for pass / fail indication
* ABS Switch between absolute and incremental mode
* Universal 8mm stem mount
* Supplied with 3mm diameter steel ball contact
|
|
MarCator Digital and Dial Indicators
MarCator Indicators are available as Digital or Dial versions. From the classic dial indicator to the newest digital indicators, Mahr offers the best solution for every measuring task.
MarCator Digital Indicator 1075
- Large, easy to read display
- MarConnect data output, select any one of the following interfaces: USB, Opto RS232C or Digimatic
- Protection class IP51
|
|
Digital Indicators
Easy to operate, high-accuracy digital indicator available in a wide measuring range
- High accuracy:
1 m(U12B/30B)
1.5 m (U60B
- High resolution: 1 m
- Measuring range: 0 to 60 mm (0 to 2.36")
- Connectable to a personal computer through RS-232C interface
- Peak hold for measuring max./min. and peak to peak values
- Power supply by AC adaptor or battery pack
- The spindle contains a damper mechanism to protect measured objects from damage (U30B and U60B)
- Inch/metric display
|
|
Technical caracteristics
To DIN 878.
- Measuring range 0-12.5 mm.
- Accuracy 0.001 mm.
- mm/inch conversion.
- 6 mm LCD display.
- Clamping stem (8 mm dia.)
- Interchangeable M2.5 contact points.
- Display pivots through 270.
- Floating zero.
- Zero set at any position.
- Allows measurements to be made using 2 separate references.
- Measurement memorisation (display hold).
- RS 232 connection - For transmitting reading to a statistical processing system.
- Supplied with a FACOM certificate of conformity.
: 213 g.
|
|
| ... products without technical information |
| |
5 Digit Rate Display, 8 Digit Totalizer Display.
Local Magnetic or Remote Reset.
4-20mA Analog Output.
Powered From Battery, DC Supply, 4-20mA Output
Loop, or AC Line.
20 Pt. Linearization Option.
Isolated Scaled Pulse Output.
Alarm Output for Rate or Total.
Windows Configuration Program.
RS 232 Port for Configuration and Monitoring.
Diagnostics for Pulse, Alarm and Analog output.
Password Protection for Menu and Reset.
|
|
♦ Displays Rate & Total Simultaneously.
♦ 4 Digit Rate Display, 8 Digit Totalizer Display.
♦ 4-20mA Analog Output.
♦ Powered From Internal Battery, External DC
Supply or 4-20mA Output Loop.
♦ 10 Pt. Linearization Available.
♦ Isolated Scaled Pulse Output.
|
|
|
With more than a quarter of a million units in operation, in applications around the world, Cameron is the undeniable leader in the design and manufacture of totalizers and flow analyzers. The NuFlo MC Family of Flow Analyzers delivers a broad range of functionality and capability from the straightforward MC-II Totalizer, which provides rate and flow, to the MC-III EXP Flow Analyzer, which utilizes Modbus communications to download extensive archival logs in less than a minute. The MC Family of Flow Analyzers is ideal for use with Cameron's comprehensive line of turbine meters and performs equally well with all turbine brands on the market today.
|
|
|
Flow products are used in a variety of applications where liquid or gas flow needs to be monitored or controlled. In many processes, both the total quantity of product being produced and the rate at which the product is being produced must be known; flow controllers can offer that information while monitoring your process efficiency.
|
|
| ... products without technical information |
| |
|
|
|
|
HIGH-TECH replacement for VA METERS
The MASS-VIEW flow meter series are a digital alternative to the conventional variable area meters. The MASS-VIEW flow meter series incorporates a digital bar graph of actual gas flow as well as indicating flow units, gas type and totalised figures.
The MASS-VIEW series operates on the principle of direct thermal mass flow measurement. It offers a standard accuracy rating of 2%RD if the flow is higher than 50% of its maximum full scale and (1%RD + 0.5%FS) on lower flows, flow ratings from 0.2 up to 200 ln/min, and handles pressures up to 10 barg. The MASS-VIEW incorporates the latest OLED technology, which gives a brighter readout than LCDs, can be viewed from virtually any angle and has fast signal response times. Alarm settings and the selection of a gas/range are accessed via menu. An analog output signal enables data logging against various parameters and full accountability of gas flow.
> Features
Clear indication in:
- actual flow rate (bar graph and value)
- desired flow units
- type of gas
- totalized flow
- Bright, wide-angle OLED display
- Freedom from parallax error
- Virtually independent of pressure and temperature variations
- Low pressure drop
- Wide flow ranges
- Fast response
- High accuracy
- Alarm and counter functions (2 alarm contacts available on meters)
- Analog (0..5 Vdc) and digital communication (Modbus-RTU, RS-232 interface)
- Configurable password protection
- 7 pre-installed gases available (Air, N2, O2, Ar, CO2, CH4, C3H8 or H2 or He)
- 4 selectable ranges (100%, 50%, 25% and 10% of maximum fullscale range)
- Digitally calibrated
- 3 year warranty
|
|
Gas Flow Regulators & Switches with LC-Display and Totalizerfunction
Alongside numerous other possible uses, the red-y compact becomes an affordable alternative to the traditional variable area flowmeters.
In addition to its independence from the mains supply the compact series offer a clear and accurate indication of flow, insensitive to pressure and temperature changes, an integrated manual control valve and configurable switch functions.
- First mass flow meter with battery power
- At least two years of autonomy
- CMOS sensor technology
- On-the-spot direct reading, including bar graph
- Extremely compact unit
- Insensitive to pressure and temperature changes
- High accuracy and turndown ratio
- No moving parts
- Resistant to pressure bumps
- No restriction on installation position
- No inlet section required
- Optional 24 Vdc supply, manual valve & switch
- 3-year warranty
|
|
Z57
- Easy handling
- External set/reset/inhibit inputs
- Digital brightness control
- Extensive programmable output performance
- Potential free output relays (changeovers)
|
|
| ... products without technical information |
| |
|
|
|
|
The new Digital Indication and Control Instrument VarioFox from AFRISO is a compact, ready-to-connect universal measurement and control instrument with integrated sensor supply and 2 (also choice of 4) voltage-free switching outputs. The instrument is very easy to operate and to program due to its text-orientated menu guidance (German, English or French).
VarioFox features a measurement unit listing, where units can be freely edited, as well as a free scaling/calibration of start and end of scale display values (99.999 - 9,999) which allows for almost all possibly required parameter settings. For horizontal cylindrical and spherical tanks integrated calibration charts can be accessed. For non-linear vessels or specially fabricated tanks a customer- specific 24-point linearization is available. The highest and lowest operational values are memorized but can also be utilized as instrument-internal visual and audible alarms on request. An alarm mute/accept button on the front of the instrument requires the responsible operator to act and this in itself provides for additional operational safety.
The measuring instrument works off an AC 50-253 V or DC 20-253 V supply and integrates a sensor input (4-20 mA, 0-20 mA, 0-10 V) and two isolated separate analogue outputs (0/4-20 mA und 0-10 mA).
|
|
Pressure transmitter, pressure switch Pressotronic
- operating pressure up 600 bar
- compact design
- up to 4 programmable set points
- alternative 1 analogue output + 1 programmable set point
- window and hysteresis function
- two outputs programmable 1-100 Hz
- direct or remote installation
- uneffected by cable length
- LED display with status indication
- pressure switch display 270 rotatable
- standardized manu structure
- max./min. memory
|
|
The dV-2 PS is a sophisticated digital pressure gauge with two independent pressure switch outputs. The gauge employs KELLERs proven microprocessor technology which produces highly accurate results. All readings are linearised and temperature corrected, to give an accuracy of 0,2 %FS.
There are two independent switches for High and Low control functions. These are solid state and therefore not subject to wear. The switch points are programmed directly from the two front panel buttons and a menu system. Alternatively, the dV-2 PS can be connected via the RS485 link to a laptop/PC, and configured using KELLERs Pressure Switch Console software. User defined configurations can be stored on the computer for future reference. Pressure sequences can also be monitored and recorded on the PC for application diagnostic purposes using KELLERs Read30 software.
|
|
|
Series ISE30 high precision digital pressure switch (for positive pressure) with two color digital display allows you to choose the setting according to your application requirements. 4 different display settings are available. Abnormal conditions can be detected at a glance.
|
|
New ultraviolet sensor identifies the presence of grease, glue, labels, wood, thread, rubber, paint, UV ink, UV crayon, and more. Confirm manufacturing processes more reliably than vision systems that cost ten times more. The UVX 300 luminescence sensor with patented technology is the clear choice because:
Unique numerical display lets you see the intensity of each reading. Now it's easy to refine processes and hysteresis.
3 to 6 times the range of any competing sensor. Won't get bumped or dirtied by target.
Only UV sensor with both auto-teach and manual calibration. Easy for low-skill operators, but able to be finely tuned.
Adjustable UV light projection and high resolution allow pin-head size detection.
Fast and convenient integration. In one sensor you get both analog and discrete output, auto-detect for PNP/NPN.
Smallest and fastest on the market.
|
|
The latest generation of tools presents itself as extremely handy. Because the air supply comes from a separate blower, the Leister WELDING PEN R reaches into the most inaccessible places. It also displays the welding temperature digitally.
Worldwide the smallest hand tool with digital display of set and actual temperature
Fatigue-free working thanks to its ergonomic handle
Heating element protection
Cooled heating element tube
Exact temperature control thanks to micro processor
|
|
| ... products without technical information |
| |
Ultrasonic Liquid Leveller
The Link Instruments ULLC2001 Ultrasonic Level Comparator is one of the most advanced Liquid Levellers on the market. Both extremely easy to use and micro-pic controlled for greater precision in measurement. The transducer is placed against the cylinder body 120mm below the calculated liquid gas level, (normally mathematically calculated). While retaining the transducer at this point the Comparator's ultrasonic level is set to around two or three divisions / bars-, by use of the 0-10 Tune Control. This gives a reference level against which the signal at the gas level / air interface is compared.
By slowly sliding the transducer up the cylinder body, you will arrive at the gas level / air interface. At this point the signal will rise sharply and this is visible on the Comparator usually as all 16 divisions / bars- appear and is due to the enhanced propagation of the Surface Acoustic Wave (SAW), across the liquid gas.
|
|
FLOMOTION 600B Ultrasonic level meters from Flomotion Systems are designed for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 800C Explosion Proof
Ultrasonic level meters from Flomotion Systems are perfect for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 1100 Ultrasonic level meter
Excellent for tank level or contents measurement of liquids or bulk solids.
FLOMOTION DR5000 SINGLE & DUAL PEN CHART RECORDERS Offers the best of both worlds, ink cartridge or thermal printing.
|
|
MUW-Mini Ultrasonic Level Monitor
The MUW-2000, an ultrasonic level monitor, is a small but high-cost performance level monitor in use of ultra sound. It has a compact and clean body made of polypropylene. It is suitable for level management of pure water and/or chemical substances. 4 to 20 mA DC current output, two alarm output for high and low level detection as well as RS232C output for maintenance are standard outputs. MUW-2000 enables you simple and easy level monitoring and controlling.
|
|
Ultrasonic Liquid Leveller
The Link Instruments ULLC2001 Ultrasonic Level Comparator is one of the most advanced Liquid Levellers on the market. Both extremely easy to use and micro-pic controlled for greater precision in measurement. The transducer is placed against the cylinder body 120mm below the calculated liquid gas level, (normally mathematically calculated). While retaining the transducer at this point the Comparator's ultrasonic level is set to around two or three divisions / bars-, by use of the 0-10 Tune Control. This gives a reference level against which the signal at the gas level / air interface is compared.
By slowly sliding the transducer up the cylinder body, you will arrive at the gas level / air interface. At this point the signal will rise sharply and this is visible on the Comparator usually as all 16 divisions / bars- appear and is due to the enhanced propagation of the Surface Acoustic Wave (SAW), across the liquid gas.
|
|
FLOMOTION 600B Ultrasonic level meters from Flomotion Systems are designed for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 800C Explosion Proof
Ultrasonic level meters from Flomotion Systems are perfect for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 1100 Ultrasonic level meter
Excellent for tank level or contents measurement of liquids or bulk solids.
FLOMOTION DR5000 SINGLE & DUAL PEN CHART RECORDERS Offers the best of both worlds, ink cartridge or thermal printing.
|
|
MUW-Mini Ultrasonic Level Monitor
The MUW-2000, an ultrasonic level monitor, is a small but high-cost performance level monitor in use of ultra sound. It has a compact and clean body made of polypropylene. It is suitable for level management of pure water and/or chemical substances. 4 to 20 mA DC current output, two alarm output for high and low level detection as well as RS232C output for maintenance are standard outputs. MUW-2000 enables you simple and easy level monitoring and controlling.
|
|
|
|
