|
|
CPJ series Optical Comparator is a highly effective precision measuring instrument integrating optical, mechanical and electric elements.
The Optical Comparators are of compact structure, simple and good appearance, economical and reliable excellence, and capable of conducting coordinate measurement and outline compare measurement on work pieces.
The image of a work piece can be a positive image or a negative image. The former means the image on the projection screen is completely identical with the work piece on the worktable in horizontal and vertical direction, while the latter means the image on the projection screen is completely opposite to the work piece on the worktable in horizontal and vertical direction.
The projector series is characterized by simple and direct measurement, high efficiency, high optical quality, clear imaging object lens and accurate magnifying ratio. Under transmission light, the error of outline measurement is below 0.08%.
The resolution for the linear encoder is 0.5um, the machine accuracy can be (3+L/75)um, We have
Rational Profile Projector share about 60% market in China, our main products passed CE. and had exported to many coutries and areas since 2000.
We are the first company in china who supply real image comparator, motor comporator and turrect measuring projector.
|
|
Ultimate geometry
The Multivision optical measurement system has the same functionality as a traditional profile projector, with the
added advantage that it instantly provides all measures in one go.
Multivision can be installed onto machines or used on benches in lieu of a profile projector.
For instance, when used on spring formers, where spring types vary considerably, Multivision will dramatically
improve the quality of production.
Multivision is ideal for three-dimensional measurements for:
Compression, torsion, and tensile springs as well as several templates
The instrument consists of:
one computer box capable of controlling 1 to 3 cameras
1 to 3 cameras
1 to 3 illuminators (front or rear mounted for profile reading)
harness for individual camera Start, sorter operation, correction communication (where possible), and machine stop.
|
|
Features:
PV-3000 C series profile projectors own high quality optical measuring performance. There is a rotary lens turret which equips with three different lenses. When working in different magnifications, users can rotate the lens, instead of changing lens individually.
|
|
|
Profile and measuring projectors are well-proven devices for a contactless measurement of work pieces. Depending on the customer's requirements, two types are available (H = horizontal, V = vertical). The projectors by Dr. Heinrich Schneider Messtechnik GmbH are characterized by the excellent quality of the image. All projectors are equipped with transmitted light and incident light illumination.
|
|
Werth profile- and measurement projectors allow rapid comparison of drawings in the workshop environment and secondly, with the aid of the Werth %u201DTastauge%u201D first proposed by Dr. Werth in 1977, they can be used for highly-accurate and fully-automatic measurements.
Minimal distortion in the image field and calibration corresponding to VDI/VDE 2617 and/or ISO 10360 guarantee corresponding trace-ability of measurement values to the linear
standard of the Physical Technical
Federal Institute (PTB).
|
|
Profile Projector PJ-A3000:
- Protractor Screen Diameter 315 mm
- Inverted Image Digital display (XY/angle)
- For detailed information, leaflet is available on request.
Profile Projector PV-5110:
- Protractor Screen Diameter 508 mm
- Inverted Image Digital display (XY/angle)
- For detailed information, leaflet is available on request.
Profile Projector PH-3515F:
- Protractor Screen Diameter 353 mm
- Erect-reversed Image Digital display (XY/angle)
- For detailed information, leaflet is available on request.
|
|
To control the quality of your manufacturing, you need the best tools for the job. And to control costs, you want the best value for your money. The OGP Focus Contour Projector definitely meets both requirements.
Focus is a rugged benchtop unit with a 14" viewable screen diameter. Its extensive list of standard features makes Focus best in class.
A range of options makes it easy to configure Focus for your specific requirements. Choose a single magnification manual system for quick checks or fill the internal turret with magnification lenses you use most. Add the joystick controlled motorized worktable for fully automated CNC operation. Projectron automatic edge detection, and SmartCheck metrology software are other popular options.
|
|
The high accuracy of TESA’s gauge blocks is the result of years of experience in producing
and making use of these products.
• Use of high quality raw materials and appropriate heat treatment, thus guaranteeing
a durable shape and dimensional stability of the gauge blocks over years.
• Very low deviations in flatness and parallelism of the measuring faces, resulting in
highly accurate gauges.
• Unique flat lapping polish as well as edge rounding techniques, leading to superior
wringability.
• Proper serial number marked on each gauge block.
|
|
|
The precise, brilliant images delivered by Nikon optics let you evaluate surface features you can't even see with other instruments. Nikon optics provide superb edge-to-edge definition and resolution with uniformity of magnification. Images appear bright and crisp even in a sharply lit room and operation is convenient for all types of part inspection and measurement. In addition, a wide range of accessories are available for customizing any Nikon optical comparator to your particular application.
|
|
Provides accurae 2D measurement for all common geometric features such as circle, lines, angies and etc, All measured results can be printed or transferred to computer for futher processing.
@@EP-1 optical profile projector is designed for all circital dimensions measurement in mould $ die making, form tools making, screw manfactring, gear manufacturing and etc.
@@ Contructed with top class components and under high standard of workmanship, IP-1 achieves very high measurement accuracy, the axial measurement accuracy is (3+L/100)um, where Lis the measured length in mm : the total contour distortion is less than 0.08%.
@@ Hihg quality lighting $ optical system provides brilliant images of expectional quality,
@@EP-1 equipped with ES-8P 1um resolution high accuracy measuring system which provides comprehensive & easy to use geometric measuerement functions
Model EP-1 1510 EP-1 2010 EP-1 2515
Table dimensions 300~170mm 350~170mm 420~250mm
Glass dimensions 175~127mm 230~120mm 290~190mm
X measurement travel 150mm 200mm 250mm
Y measurement travel 100mm 100mm 150mm
Z focusing travel 90mm
XY readout resolution 0.001mm
Axial measuring accuracy (3+L/100)um
Screen Screen diameter 315mm 415mm
A readout range 0-360 degree
A readout resolution 0.01 degree
Max. Contour diatortion 0.08%
Lens Magnifications 10~ 20~ 50~ 10~ 20~ 50~ 10~ 20~ 50~
|
|
Atomic Force Microscopy
Atomic Force Microscopes (AFMs) scan the surface of a sample using a very fine tip on the end of a microscale cantilever.
Atomic interactions between the tip and the surface lead to a deflection of the cantilever which is then detected by a piezoresistive element. Based on this effect, the AFM can measure the topography or roughness of a surface with very high resolution non destructively. The AFM can be used in different operating modes and thus allows for the investigation of further properties, such as electrical and magnetical forces or elasticity of a specimen.
|
|
Features :
- Roughness and contour in a single stroke You need only half the time and your work is faster, more reliable and more efficient.With just one measurement, you have all the results for
roughness and contour characteristics at a glance. So you have more time for other things!
- State-of-the-art measuring technology for small tolerances. The integrated optical measuring system provides pinpoint accuracy over a broad measuring range and at maximum resolution. You can process jobs with low tolerances and thus tackle new challenges head-on.
- Innovative tracing arm concept for maximum stability The tracing arms, which have been designed using bridge-building techniques, ensure maximum rigidity, low-oscillation measurements and unwavering precision. So you can build your own bridges - to new dimensions of flexibility!
- Tracing arms with magnetic connection The magnetic mount ensures excellent system protection and a long service life.
|
|
| ... products without technical information |
| |
PLANET K30
5-axis CNC machining centre with mobile gantry, designed for milling, drilling, threadcutting and slotting operations on bars or workpieces made of aluminium, PVC, light alloys in general and steel, with section up to 400 x 400 mm. Behind the column there is provision (optional) for installing a cutting
unit with blade dia. 550 mm, serving for making the separation cuts directly on the unmachined bar. The high power (30 kW SI) electro-spindle with HSK63A toolholder, allows performing the various machining operations including heavy duty ones. The 16-place rotary disc tool magazine (N/C axis) can also contain angle machining heads for machining on the bottom face. A blade tool dia. 600 mm is seated in a special extra place. The machine can be used in double mode for minimizing machine downtimes during workpiece loading/unloading. It is also
possible to machine workpieces having different codes and machining operations between the two work areas.
|
|
The Profile Machining Center PBZ NT
Nobody can tell you what machining tasks the future will bring to you but with the PBZ NT from Handtmann you are prepared. Experience the flexibility of a top class profiler.
Profile lengths up to 984 inch and the highly flexible clamping system are setting the benchmark for the market. Complete machining from the bar stock on all 6 sides as well the high accuracy go without saying.
Do not limit your possibilities with a just normal machining centre. Get flexibility and productivity for today and future tasks with a Handtmann PBZ NT.
|
|
The Profile Machining Center PBZ HD
Experience high performance !
Worldwide unique is the PBZ HD from Handtmann. Developed together with international aerospace companies the HPC centre allows machining of solid materials.
Machining rates of up to 98% can be achieved. To ensure quality and precision a new designed clamping system has been integrated. Without additional fixtures you are able to machine your profiles. Thermal compensation and strong clamping forces can cope with difficult materials and long parts.
Be impressed by the possibilities of the Handtmann PBZ HD
Technical details
- spindle capacity in S1 up to 70 kW
- travel speeds up to 70m/min
- for plastics, composite, aluminium, steel and titanium
|
|
The Profile Machining Center PBZ LC
Modular designed the HSC centre fits your individual needs. Delivered as 4 or 5 axis centre you can reduce your production costs thanks to the two working zones allowing set up and machining at the same time.
The flexible clamping system from Handtmann allows nearly all profiles to be clamped. The moving portal, equipped with rack and pinion drives and guided on both sides achieves the accuracy required in the automotive or aerospace industry.
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we will work on it !
Further profile machining centres, for the processing of aluminium profiles as well as for the processing of PVC profiles cover our product range.
|
|
foto 1
foto 2
foto 3
foto 4
foto 5
VISION and VISIONFLEX cog belts can be machine worked in order to obtain special functional features (cog belts with reinforced backs are available for machine work).
• VISION T execution, DR series and coatings
• VISIONFLEX
FA execution and coatings offering several configuration possibilities
NB: Please note that cog belts with reinforced backs have limited flexibility
and require pulleys with greater diameters.
More flexibility can be achieved through grooves or millings
Some work examples:
• Backs with transversal milling
• Backs with lengthwise milling
• Ground back
• Ground sides
• Cog removal
• Cogs with lengthwise milling
• Pierced cog belts
|
|
| ... products without technical information |
| |
... see all the products in the category
Belts
|
AP 6500
The machines of the AP series are perfectly adapted for the
requirements of the window and construction steel manufacturers.
Taking into account our basic machine concept, customer requirements
can be satisfied by unique solutions for every manufacturing demand.
|
|
|
The structure is made of a machine bed with a sliding carriage in its rear section. Both are in electrowelded steel duly stabilized after each work phase to ensure that there is no interior tension; they are sized to guarantee stability and precision during machining operations.
|
|
Recently, the use of aluminium profi les, very popular with the building industry, have become more common for industrial purposes in replacement of other materials.
The transportation, roads, railways, lighting and furniture manufacturing
fields are certainly the more usual users of profi les.
Every week Tekna receives and develops studies for the feasibility and machining times of special parts obtained from extrudates of aluminium, PVC, steel and ABS.
For many of these particulars it is necessary to study and develop special clamping systems, complex tools, differentiated lubrications, software, macro and a lot more.
In some cases, another important element is the handling.
Tekna is particularly trained with the solution of these problems.
|
|
|
|
see the results for the following category
