|
|
- Satin-chromed body
- With Tungsten carbide measuring tip
- With double dial indicator for measuring mm stroke
- Shockproof
- Micron versions are jewelled
- Adjustable scale with stop screw
- Some models offer tolerance indicators, see picture
- Can be supplied with or without "lug" on back plate
- 400-03 features remote operation control by cable plunger
- Packed in foam box
|
|
|
Shockproof and waterproof dial indicator. Insulation against water and dust in the most delicate areas. Rubber casing to protect the spindle and rack. The upper part of the dial indicator is insulated by a protective cap. The front and back of the dial face are protected by seals while the special shape of the locking ring ensures maximum protection. Rotating bezel with tolerance markers. Manufactured as per DIN 878. Supplied in case.
|
|
Digitronic Indicator - 405 Series
Direct Inch / Metric conversion
58mm dial face
Lugback and 8mm stem mountings
Resolution 0.01m/0.0005"
Absolute / Incremental reading
Floating Zero
|
|
|
The Gauge Buster Load, Stress and Load Rate Indicator is designed to replace dial gauges on materials testing machines. Features include an industry first Auto-Test-Reset mode for hands free operation, bar graph load rate display, permanent storage of test results and easy transfer of results into data base programs. The Gauge Buster LP offers all of the features of the standard Gauge Buster plus the addition of a second digital encoder input for measuring piston/crosshead travel. During each test, the Gauge Buster records load, displacement, time data and can be configured to display piston/crosshead travel rate. After each test has completed, the recorded data (XY data and results) can be downloaded to a PC with ADMET’s WinCOM/WinCOM Plus Data Communications Program for further review and analysis. The Gauge Buster LP is sometimes used for soil/asphalt compaction.
|
|
List of Dial Indicator: List of functions implemented in various models of dial indicators.
Compact type Dial Indicator: Compact type with a maximum scale frame diameter of 41 mm.
Dial Indicator 2046S: 10 mm-stroke, regular dial indicator with a minimum reading of 1/100 mm.
Large Dial Type Digimatic Indicaor: Large dial type with a measuring range of 20 mm or more.
|
|
Provide the advantages of mechanics combined with electronics – All in one.
• Inductive measuring system,
patented.
• Analogue and numerical
indication.
• Numerical interval to
0,01/0,001 mm.
• Selectable scale division :
10, 20, 50 µm/1, 2, 5 µm.
• Water and coolant resistant
(IP65).
• Metric/inch conversion.
• RS 232 data output combined
with external power supply.
• Displayed measuring modes
(NOR/MIN/MAX/MAX-MIN).
• Automatic shut-down.
• Compatible with all TESATAST
accessories.
|
|
|
|
|
|
Dial Indicators Group 4
Features:
- High amplification movement permits:
Graduations as fine as .00002"
Improved readability and minimized judgement error
Performance comparable to more expensive gaging methods
Convenient portability - no external connection required
Interchangeability - can be used in the same environment as any other mechanical dial indicator
Simplified service - complete movement is easly removed from the case for cleaning or direct replacement at low cost
- Lever principle of amplification - minimizes effect of spindle sideshake. Linearity and repeatability maintained through millions os cycles
- 3-5/8" bezel - conforms to ANSI/AGD standards
- Adjustable gaging force - easily adjustable from 2 to 5 oz. by externally accessible screw
- External zero adjustment knob - makes possible the advantage of adjusting dial indicator hand to zero rather than rotating bezel to 'zero' hand
- Optional lifting lever or cable release. Use lifting lever only when dial indicator is back mounted. Cable release may be used when dial indicator is back or stem mounted and enhances stability of gaging setup
|
|
MarCator Small Dial Indicator 803 A Standard version
- For application in cramped conditions
- High precision gears and pinions
- Lifter protection cap on the top of the measuring spindle
|
|
General description
MU-1 m/MU-01Z
Scale graduation: 0.001mm or 0.0001"
Travel: 1 mm/0.04"
Accuracy according to DIATEST standard
Various measuring pressures
MU-10 m/MU-1Z
Scale graduation: 0.01 mm or 0.001"
Travel: 10 mm/0.5"
Accuracy according to DIN 878 or DIATEST standard
Various measuring pressures
Micro comparator (F-1000)
Scale graduation: 0.001 mm
Measuring range: ± 0.05 mm
Accuracy according to DIN 879
Various measuring pressures
MDU-125
Measuring range: 12.5 mm or 0,5"
Resolution: 0.01 mm/0.001 mm (0.0005"/0.00005")
LCD digital display
Can be switched from mm to inch
Data output: opto-RS232
Model MDU-A with traffic light display and min/max function
Model MDU-M with min/max function (only for split-ball and plunger probes)
Analodig (ANA)
Measuring range: ± 0.2 mm digital/± 0.05 mm analogue
Resolution: 0,001 mm
Optional with output similar to RS232 and min/max-function
|
|
Slim Type ABS Digimatic Indicator ID-N/ID-B:
- Slim 35 mm wide body greatly enhances application range.
- Various features including waterproofness, display inversion, and back plunger.
ABS Digimatic Indicator IDS: Simplified economy type with a single function.
ABS Digimatic Indicator IDU: Single-function, economy type with a measuring range of 25.4 mm.
ABS Digimatic Indicator IDC:
- Widely used as a general-purpose, multifunction indicator
- Model provided with various measuring ranges, measuring forces, etc.
|
|
Digital Indicators
* Inch / metric
0-12.7mm (0-0.5") measuring range
0.001mm (0.00005") resolution
* Zero / on / off
Zero setting at any position / manual
power on / off
Rotating bezel – 330 degrees
* Data hold
* TOL Set tolerance for pass / fail indication
* ABS Switch between absolute and incremental mode
* Universal 8mm stem mount
* Supplied with 3mm diameter steel ball contact
|
|
MarCator Digital and Dial Indicators
MarCator Indicators are available as Digital or Dial versions. From the classic dial indicator to the newest digital indicators, Mahr offers the best solution for every measuring task.
MarCator Digital Indicator 1075
- Large, easy to read display
- MarConnect data output, select any one of the following interfaces: USB, Opto RS232C or Digimatic
- Protection class IP51
|
|
Digital Indicators
Easy to operate, high-accuracy digital indicator available in a wide measuring range
- High accuracy:
± 1 µm(U12B/30B)
± 1.5 µm (U60B
- High resolution: 1 µm
- Measuring range: 0 to 60 mm (0 to 2.36")
- Connectable to a personal computer through RS-232C interface
- Peak hold for measuring max./min. and peak to peak values
- Power supply by AC adaptor or battery pack
- The spindle contains a damper mechanism to protect measured objects from damage (U30B and U60B)
- Inch/metric display
|
|
Technical caracteristics
To DIN 878.
- Measuring range 0-12.5 mm.
- Accuracy 0.001 mm.
- mm/inch conversion.
- 6 mm LCD display.
- Clamping stem (8 mm dia.)
- Interchangeable M2.5 contact points.
- Display pivots through 270°.
- Floating zero.
- Zero set at any position.
- Allows measurements to be made using 2 separate references.
- Measurement memorisation (display hold).
- RS 232 connection - For transmitting reading to a statistical processing system.
- Supplied with a FACOM certificate of conformity.
: 213 g.
|
|
|
|
|
|
Test Indicators and Holders
- Dial Test Indicators with dovetail mounts - Series Nos. 708, 708M, 709, 709M
- Attachments for Starrett Nos. 708, 709, and 811 Series Test Indicators - Series No. 708
- Collet Adaptor for use with any 3/16" diameter Indicator Attachment
- Collet Adaptor with Swivel Post
- Dial Test Indicators with swivel head - Series No. 811, 811M
- Last Word® Dial Test Indicators - Series No. 711, 711M
- Attachments for Starrett No. 711 Series Last Word® Dial Test Indicators - Series No. 711
- 360° Rotatable-Contact Test Indicator - Series No. 564
- Back-Plunger Dial Indicators - Series Nos. 650, 650M, 651, 651M
- Attachments for Starrett No. 650 and No. 651 Series Back-Plunger Dial Test Indicators
- Back-Plunger Dial Indicators - Series No. 641, 641M
- Universal Back-Plunger Dial Indicators - Series No. 196, 196M
- Attachments for Starrett Nos. 196, 196M Series Universal Indicators - Series No. 196
- Magnetic Base Indicator Holder - Series No. 657AA
- Magnetic Base Indicator Holder with swivel post assembly - Series No. 657A
- No. 657 Series Sets
- Flex-O-Post Indicator Holders with magnetic base - Series No. 657T
- Magnetic Base Universal Indicator Holder with triple-jointed arm and fine-adjustment - Series No. 657-1, 657-2
- Magnetic Base with triple-jointed arm - Series No. 660
|
|
|
|
|
|
General
Suitable for use with DIATEST bore gauges (e.g. split-ball probes) for serial measuring of small parts
Also suitable in connection with special applications, favoured for use together with DIATEST floating holders
Checking stand MST-58
Measuring stroke adjustable from 0 to 33 mm/1.3"
Platen: Ø 58 mm/2.3"
Top of stand continuously adjustable
Maximum height of work-piece including gauge: 140 mm/5.5"
Accessories: clamp-on-vee attachment for positioning of work-piece
Universal stand MST-102
Measuring stroke adjustable from 0 to 130 mm/5.1" with stop
Size of platen: 100 mm x 100 mm/4" x 4" (larger platen available in standard programme)
Different jib arms to hold measuring system
Extensive range of accessories in standard programme
Mini fixture KM
Especially suitable for measuring small work-pieces in combination with BMD plugs
Optimal position due to possibility for adjustments and accessories,
model as gauging station with several mini fixtures side-by-side.
Suitable for multi-plane plugs
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
