|
|
The small and handy gauge for quick and accurate measurments has especially been designed for use in workshops. A diamond tip of the piezoelectric stylus smoothly scans over the surface to measure roughness.
Parameters availbalbe: Ra and Rz, three user-adjustable cut-off lengths.
Measuring range:
Ra: 0,05 .. 15 µm
Rz: 0,1.. 50 µm
|
|
●Pocket-size & economically price
●Large measuring range suitable for most materials
●Measures flat, outer cylinder and sloping surface
●Both Ra and Rz parameters in one instrument
●Features external calibration at keyboard
●Standard conform to ISO and DIN
●Rechargeable batteries, work while charging
|
|
●Extremely easy operation!
●4 different roughness parameters
●Optional pickup for grooves/bores and holes.
●Data output RS232 to printer TA220S or PC
●Li-ion rechargeable Battery
●Standard conform to ISO
|
|
The inexpensive, high quality, hand held Roughness Testers are the ideal instruments for general surface roughness testing. These extremely versatile gauges are suitable for testing a wide variety of materials, boasting a large measuring range and easy-to-read, digital display.
Features
Ra and Rz parameters, switchable display
Adjustable tracer also for 90º or 180º measurement plane
Standard cut-off of 0.25mm, 0.8mm and 2.5mm, adjustable to 1, 3 or 5 times
Large measuring range suitable for most materials
Piezo-electric pickup stylus for external surfaces (diamond tip for latest ISO standard)
Accuracy to DIN4772 Class 3
|
|
Portable Surface Roughness Measurement Surftest SJ-201:
- Light, compact body and simple operation
- Surface roughness measuring instrument operable in much the same way a hand tool is used
Portable Surface Roughness Measurement Surftest SJ-301:
- Pursuit of operability and various needs
- Ultimate solution of compact surface roughness measuring instruments
Portable Surface Roughness Measurement Surftest SJ-400:
- Allows skid-free measurement regardless of compactness
- Compatible with waviness profile and minute step measurement
|
|
HOMMEL TESTER T1000
Simple, mobile measurement of roughness, waviness and profile
Whether in the workshop, on the production line or in the lab, the HOMMEL TESTER T1000 meets the highest requirements as a complete, mobile measuring station.
The T1000 basic is suitable for all standard roughness measuring tasks with skid scanning system. It is excellently suitable for measuring the cross scanning between collars. The T1000 wave measures primary profiles and wavinesses additionally with the reference plane scanning system.
The large display shows parameters and profile logs clearly. The results can also be logged on the integrated printer. In stationary operation, very demanding evaluations can be made with the Windows software TURBO DATAWIN.
|
|
|
|
|
|
Notes:
- Measuring range: 350 µm/180 µm/90 µm (changes automatically)
- Pick-up: Inductive skidded pick-up, 2 µm (80 µin) stylus tip, measuring force approx. 0.7 mN
- Unit of measurement: Metric, inch
- standards: DIN/ISO/JIS/ASME
- Traversing length Lt* 1.75 mm, 5.6 mm, 17.5 mm; automatic (0.069 in, 0.22 in, 0.69 in)
- Traversing length (acc. to MOTIF): 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.040 in, 0.080 in, 0.160 in, 0.320 in, 0.480 in, 0.640 in)
- Cutoff lc*: 0.25 mm, 0.8 mm, 2.5 mm; automatic (0.010 in, 0.030 in, 0.100 in)
- Short cutoff*: Selectable
- Number of cutoffs selectable 1 to 5
- Filter* Phase-correct profile filter (Gaussian filter) acc. to DIN EN ISO 11562, special filter acc. to DIN EN ISO 13565-1, ls filter acc. to DIN EN ISO 3274 (can be disabled)
- Parameters 24 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to tp (JIS, ASME), RSm, R, Ar, Rx
- Languages: 14 including 3 Asian languages
- Memory capacity: Max. 15 profiles, max. 20,000 results
- Calibration function: Dynamic
- Other functions: Blocking of settings (code-protected), date/time
|
|
Portable Surface Roughness Measurement Surftest SJ-201:
- Light, compact body and simple operation
- Surface roughness measuring instrument operable in much the same way a hand tool is used
Surface Roughness Measurement Surftest SV-3100:
- Enhanced multifunction analysis
- X axis (horizontal) Measuring Range: 100, 200 mm
- World's top-class hybrid machine
Surface Roughness / Contour Measurement Formtracer SV-C4100:
- Dual role supported by replacing the detector
- Resolution for contour detector: 0.05 um
|
|
Mean roughness Ra (ISO 4287, DIN 4768)
The mean roughness Ra matches the arithmetical mean of the absolute val-
ues related to the profile deviation y within the reference length l.
Max. profile valley depth Rmax (DIN 4768)
The max. profile valley depth Rmax counts for the most significant single
roughness depths Zi within the total length lm.
According to ISO 4288 and DIN 4287 - Part 1, this parameter is also
specified as Ry max.
|
|
MarSurf XR 20 MarWin
The entrance into the top class of Mahr surface metrology. The PC-based equipment provides all common parameters and profiles according to international standards.
- Quick & Easy
is Mahr specific operation help for quick and simple operation convenience
- You do not have to be afraid of the high performance level! Clear symbols are self-explanatory!
- The measuring station for laboratory and production line. Manifold configurations possible which opens ways into the huge world of micro dimensions in surface metrology
|
|
|
|
|
|
The PHASE II SRG-1000 Surface Roughness Tester is a pocket-sized economically priced instrument for measuring surface texture conforming to traceable standards. It can be used on the shop floor in any position, horizontal, vertical or anywhere in between.
The large LCD display shows either Roughness parameter Ra or Rz at the touch of a button, combined with the selected cutoff length. External calibration of the Roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user about each individual measurement status when ready.
The easy to use SRG-1000 operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80x 30mm. The areas of application are wide spread. It is suitable for inspection departments, quality control, on the shop floor during machining, during assembly, and on site.
The SRG-1000 determines both Roughness parameters Ra and Rz within a wide measuring range (see specifications below). The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances that conform to ISO class 3. Roughness parameter Ra is computed to conform to ISO and Rz is computed to conform to DIN.
|
|
Digitronic Indicator - 405 Series
Direct Inch / Metric conversion
58mm dial face
Lugback and 8mm stem mountings
Resolution 0.01m/0.0005"
Absolute / Incremental reading
Floating Zero
|
|
|
The Gauge Buster Load, Stress and Load Rate Indicator is designed to replace dial gauges on materials testing machines. Features include an industry first Auto-Test-Reset mode for hands free operation, bar graph load rate display, permanent storage of test results and easy transfer of results into data base programs. The Gauge Buster LP offers all of the features of the standard Gauge Buster plus the addition of a second digital encoder input for measuring piston/crosshead travel. During each test, the Gauge Buster records load, displacement, time data and can be configured to display piston/crosshead travel rate. After each test has completed, the recorded data (XY data and results) can be downloaded to a PC with ADMET’s WinCOM/WinCOM Plus Data Communications Program for further review and analysis. The Gauge Buster LP is sometimes used for soil/asphalt compaction.
|
|
Slim Type ABS Digimatic Indicator ID-N/ID-B:
- Slim 35 mm wide body greatly enhances application range.
- Various features including waterproofness, display inversion, and back plunger.
ABS Digimatic Indicator IDS: Simplified economy type with a single function.
ABS Digimatic Indicator IDU: Single-function, economy type with a measuring range of 25.4 mm.
ABS Digimatic Indicator IDC:
- Widely used as a general-purpose, multifunction indicator
- Model provided with various measuring ranges, measuring forces, etc.
|
|
Digital Indicators
* Inch / metric
0-12.7mm (0-0.5") measuring range
0.001mm (0.00005") resolution
* Zero / on / off
Zero setting at any position / manual
power on / off
Rotating bezel – 330 degrees
* Data hold
* TOL Set tolerance for pass / fail indication
* ABS Switch between absolute and incremental mode
* Universal 8mm stem mount
* Supplied with 3mm diameter steel ball contact
|
|
MarCator Digital and Dial Indicators
MarCator Indicators are available as Digital or Dial versions. From the classic dial indicator to the newest digital indicators, Mahr offers the best solution for every measuring task.
MarCator Digital Indicator 1075
- Large, easy to read display
- MarConnect data output, select any one of the following interfaces: USB, Opto RS232C or Digimatic
- Protection class IP51
|
|
Digital Indicators
Easy to operate, high-accuracy digital indicator available in a wide measuring range
- High accuracy:
± 1 µm(U12B/30B)
± 1.5 µm (U60B
- High resolution: 1 µm
- Measuring range: 0 to 60 mm (0 to 2.36")
- Connectable to a personal computer through RS-232C interface
- Peak hold for measuring max./min. and peak to peak values
- Power supply by AC adaptor or battery pack
- The spindle contains a damper mechanism to protect measured objects from damage (U30B and U60B)
- Inch/metric display
|
|
Technical caracteristics
To DIN 878.
- Measuring range 0-12.5 mm.
- Accuracy 0.001 mm.
- mm/inch conversion.
- 6 mm LCD display.
- Clamping stem (8 mm dia.)
- Interchangeable M2.5 contact points.
- Display pivots through 270°.
- Floating zero.
- Zero set at any position.
- Allows measurements to be made using 2 separate references.
- Measurement memorisation (display hold).
- RS 232 connection - For transmitting reading to a statistical processing system.
- Supplied with a FACOM certificate of conformity.
: 213 g.
|
|
|
|
|
|
Model 49-5X is a precision micrometer for measuring thickness of sheet materials such as Textiles, Fabrics and Non-wovens. A selection of pressure feet is available to meet a variety of standards requirements. The unit also incorporates a unique cantilever system to vary the pressure exerted on the sample by adding or removing weights. Pressure foot speed and dwell time are controlled to insure accurate and repeatable test results.
APPLICATIONS
Paper, Paperboard, Corrugated, Cloth, Plastic, Rubber, Plastic Film, Textile Fabrics, Non-wovens, Felts, Geomaterials, Floor Coverings, Leathers and Wipes.
SPECIFICATIONS
(49-50) (49-52)
Range: 0 to 2 mm 0 to 20 mm
Resolution: 0.001 mm* 0.01 mm*
Accuracy: ±0.0025 mm
up to 1.25 mm ±0.025 mm
Repeatability: 0.1% of range
Operating Temp. +20°C to +30°C
*Resolution increased by a factor of ten to 0.1μm (for 49-50) and to 1.0μm (for 49-52)
FEATURES
* Large LCD display
* Electronic compensation minimizes displacement transducer non-linearity
* Rigid cast aluminum base assures thermal and mechanical stability
* Foot switch allows hands-free operation of test button
* RS-232 data output
* Range: 0 to 2 mm and 0 to 20 mm
* Resolution: 0.001 mm*
* Accuracy: ±0.0025 mm up to 1.25 mm
* Repeatability: 0.1% of range
* Operating temperature: +20°C to +30°C
|
|
TMI 49-70 and 49-72 Series Micrometers provide the precision necessary for the critical thickness measurement of numerous sheet materials.
APPLICATIONS
Films, Foils, Tissue, Papers, Corrugated, Paperboard, Plastics, Felt, Rubber, Fiberboard, Carton board
SPECIFICATIONS
* Range of measurement:Model 49-70: 0.0 to 1.270 x .003 mm;(0.0 to 0.050 x .0001 in.)
* Range of measurement:Model 49-72: 0.0 to 12.70 x .03 mm;(0.0 to 0.5 x .001 in.)
* Standard anvil diameter 16 mm (0.63 in.)
* Load: 7.3 psi (50.4 kPa)
FEATURES
* Digital display
* Dual range (Imperial or Metric)
* Motorized automatic cycling
* 5-second test cycle
* Special anvil diameters and dead weight loads available upon request
* Calibrated gauge blocks are available to meet your needs
|
|
|
|
|
|
TMI 49-60, 61, 62 and 63 Series Micrometers provide the precision necessary for the critical thickness measurement of numerous sheet materials.
APPLICATIONS
Films, Foils, Papers, Tissue, Corrugated, Paperboard, Carton board, Plastics, Rubber, Felt, Fiberboard
SPECIFICATIONS
* Meets ASTM D-645, D-374, TAPPI T-411, AS/NZ 1031, 426, 1031, 427, SCAN P7, DIN 53105, ISO 534
* Ranges of measurement:
49-60 series: 0-.050 × .00001 in.
49-61 series: 0-1.250 mm × .0005 mm
49-62 series: 0- 0.5 in. × .0001 in.
49-63 series: 0-12 mm × .001 mm . 76.20 mm (3 in.) throat depth
* Standard anvil diameter 16 mm. (0.63 in)
* Load: 7.3 psi (50.4 kPa)
FEATURES
* Digital display
* RS-232C output
* Motorized automatic cycling
* Standby feature
* Compatible with TMI's 49-66 Monitor/ MicrometerT for increased output capabilities
* Calibrated gauge blocks are available to meet your needs
INSTRUMENT SIZE
Depth: 305 mm (12 in.)
Height: 381 mm (15 in.)
Width: 279 mm (11 in.)
Weight 23.6 kg (52 lb)
Electrical: Specify voltage requirements when ordering
ORDERING INFORMATION
Catalog Number: 49-60
|
|
|
|
|
|
Ergonomically built to eliminate lugging heavy test cans the Seraphin® Dual Test Measure Cart easily transports up to two full 5-Gallon or 20-Liter test measures. Carts help improve productivity safely reducing the potential of injury and spills associated with the movement of full test measures. PN: E300117PT
Protect your investment with a protective Carrying Case, which helps maintain both the integrity and cleanliness of test measures during moving and storage. The metal carrying case, painted red, fits either a 5-Gallon or 20-Liter Seraphin® test measure. PN: E810009
Safety First - A Seraphin® Model 3 Funnel has a spark resistant copper spout reducting the danger of static electricity. The Model 3 funnel features five gallon capacity, galvanized steel construction, and allows cleaner, faster liquid transfers with fewer spills.
PN: E810030
Extra tall Galvanized Funnel A major debilitating factor in the petroleum industry is back injuries resulting from bending, lifting and carrying heavy items. The Seraphin® extra tall 35" funnel sits higher than our Model 3 funnel alleviating some bending. It is made of galvanized steel and like our Model 3 has a safety spark resistant copper spout eliminating the danger of static electricity. PN E300483
Magnify the Meniscus. Seraphin® meniscus readers come ina (3" diameter) and 5X (4" diameter). They have a pre focus dual lens for checking the correct reading on the sight gauge. The transparent acrylic base allows ambient light to illuminate the scale area for clear viewing. 7X PN: E300400 5X PN: E300401
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
