|
|
|
The LAMBDA carries out the quadrature of the circle which consists in associating great capacities of measurement, a high rate of travel and an excellent measuring accuracy. One or more gantries ensure measurements on sizes of machine being able to reach more than 20 meters.
|
|
|
Continuous development has made scanning technology an indispensable technical production factor. Bridge-type measuring machines from Carl Zeiss, with VAST® and Navigator® technology for example, not only ensure a high level of process stability, they also fit seamlessly into the rough production environment as a result of their sturdiness and compactness. You can read more about the classic PRISMO®, as well as smaller measuring machines such as ACCURA® and CONTURA® G2 here.
|
|
|
The range of particularly wide machines TOTAL STATUS offers more than 60 models different in term from size (500 to 2000 mm), from equipment and environmental conditions. Certain models require a air-conditioned environment, others can evolve/move in a medium of workshop having variations in temperature of 15° and more. Capable of point-to-point measurements, with continuous scanning by contact or optics, machines TOTAL STATUS are equipped with powerful software PCMDIS common to all the range of the machines Hexagon Metrology.
|
|
• High-accuracy natural stone guides permanently ensure excellent measuring accuracy,
• Precision air-cushion bearings,tried and proven thousands of times, assure high measuring accuracy, reduce energy input, and guarantee smooth, low-vibration movement,
• Non-contact scale rules ensure low-wear, high-precision data acquisition on all axes,Resolution: 0,15 µm
• Can be equipped with active vibration damping systems,
• Pneumatic counterweight for Z axis,
• Digital motors.
|
|
The SmartScope® Flash™ 500 offers all the great Flash features and performance in a large travel bridge-design system. Parts move on a precision DC motor-driven Y-axis stage while the optics assembly travels in the X-axis across a stable bridge cross member. This design assures rapid, smooth part translation and robust measurement performance.
An extended Y-axis travel of 600 mm is optional, and 300 mm Z travel is optional.
Every SmartScope Flash 500 is multisensor capable.
Whether your needs call for multisensor now or in the future, your SmartScope Flash is up to the task. Its advanced design allows the additional precision of multiple sensors, including touch trigger probes, micro-probes, and laser scanners. Field retrofits are easily accomplished.
|
|
SmartScope® Quest™ 250 is a full-featured coordinate measurement system that is designed to incorporate optical, touch probe, micro-probes, and laser sensors into a compact, benchtop platform.
It is specifically designed to measure smaller parts, or for situations where space is at a premium. Its rigid structural design provides full access to the measurement volume for fixturing flexibility.
|
|
|
Machines of measurement from which guidance is protected. this technology makes it possible to work in aggressive mediums of workshop, there or a machine of traditional gantry measurement quickly becomes inoperative
|
|
Features:
Particularly suitable for large components and high-accuracy work.
» Pneumatic counterweight for Z axis.
» Smooth and low-vibration motion in axes thanks to granite guides.
» Parallel drive of the two longitudinal axes, therefore no contouring error.
» Robust design with high load capacity.
» Brushless drive systems.
» Low air consumption.
» Wear-free data acquisition thanks to optoelectrical measuring scales.
» Resolution: 0.15µm
|
|
The DM3500 is a compact, overhead dimensioning unit that automatically measures length, width, and height of packages as they are transported on a conveyor through the bar code scanning area.
The self-contained dimensioner is designed for simple installation over existing conveyor systems. No break is required in the conveyor belt. The unit’s overhead location eliminates the potential for damage that side and bottom-mounted systems encounter.
Typical Applications Include:
- Parcel revenue recovery
- Revenue recovery
- Trailer load planning
- Automatic rate charging
- Sortation accuracy
Outstanding Features:
- Accuracy of +/- 0.10” [0.25 cm] at belt speeds up to 600 FPM [3.0 MPS]
- Exclusive “find belt” software functionality enables “one button” setup and plug-and-play operation
- Eliminates the need for alignment of multiple components
- Uses time-tested design incorporating both solid-state laser diode and CCD array to capture package dimensions
|
|
Inspect3D supplies high-capacity gantry machines with air-cushion bearings for highest demands. An open gantry design is the ideal system, permitting easy access to the components to be measured.
Particularly suitable for large components and high-accuracy work.
» Pneumatic counterweight for Z axis.
» Smooth and low-vibration motion in axes thanks to granite guides.
» Parallel drive of the two longitudinal axes, therefore no contouring error
» Robust design with high load capacity.
» Brushless drive systems.
» Low air consumption.
» Wear-free data acquisition thanks to optoelectrical measuring scales.
» Resolution: 0.15µm
|
|
|
|
|
|
Measurable work pieces
- all types of gears with the standard Software package
with optional Software package:
- measurements of prismatic parts and Free Form Surfaces with Wenzel CM-Software
- Worms and Worm gears
- Bevel gears
- Tools like hobs, shavers and shapers
- Other rotational symmetric parts
- Special profiles
- Scanning of unknown contours
Technology:
- Bridge type GMM with rotary table integrated in the machine base
- Machine base of massive dark granite
- Active damping system
- Thermal stability through the use of identical material for base and axes
- Air bearings on the linear axes
- Wenzelgeco CNC-Controller designed to meet the spezial requirements of high precision measuremts
- Scanning 3D probe, optional probechanger
Technical data:
- Work piece diameter w/o probe changer min./max. 5 - 500 mm
- Internal work piece diameter >12 mm
- Module min./max (0,2) 0,5-20 mm
- Helix angle <90 °
- Measurable face width max. 300 mm
- Number of axes 4
- Measuring precision according to VDI/VDE 2612/2613 Gruppe I
- Axes travel X-Axis 500 mm, Y-Axis 600 mm, Z-Axis 400 mm
- Type of Rotary Table L300
() optional
|
|
|
|
|
|
Measurable work pieces
- all types of gears with the standard Software package
with optional Software package:
- measurements of prismatic parts and Free Form Surfaces with Wenzel CM-Software
- Worms and Worm gears
- Bevel gears
- Tools like hobs, shavers and shapers
- Other rotational symmetric parts
- Special profiles
- Scanning of unknown contours
Technology:
- Bridge type GMM with rotary table integrated in the machine base
- Machine base of massive dark granite
- Active damping system
- Thermal stability through the use of identical material for base and axes
- Air bearings on the linear axes
- Wenzelgeco CNC-Controller designed to meet the spezial requirements of high precision measuremts
- Scanning 3D probe, optional probechanger
Technical data:
- Work piece diameter w/o probe changer min./max. 5 - 1000 mm
- Internal work piece diameter > 12 mm
- Module min./max. (0,2) 0,5-25 mm
- Helix angle < 90 °
- Measurable face width max. 600 mm
- Number of axes 4
- Measuring precision according to VDI/VDE 2612/2613 Gruppe I
- Axes travel X-Axis 1000 mm, Y-Axis 1200 mm, Z-Axis 800 mm
- Type of Rotary Table L400 (L300)
() optional
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
