|
|
|
The LAMBDA carries out the quadrature of the circle which consists in associating great capacities of measurement, a high rate of travel and an excellent measuring accuracy. One or more gantries ensure measurements on sizes of machine being able to reach more than 20 meters.
|
|
|
Continuous development has made scanning technology an indispensable technical production factor. Bridge-type measuring machines from Carl Zeiss, with VAST® and Navigator® technology for example, not only ensure a high level of process stability, they also fit seamlessly into the rough production environment as a result of their sturdiness and compactness. You can read more about the classic PRISMO®, as well as smaller measuring machines such as ACCURA® and CONTURA® G2 here.
|
|
|
The range of particularly wide machines TOTAL STATUS offers more than 60 models different in term from size (500 to 2000 mm), from equipment and environmental conditions. Certain models require a air-conditioned environment, others can evolve/move in a medium of workshop having variations in temperature of 15° and more. Capable of point-to-point measurements, with continuous scanning by contact or optics, machines TOTAL STATUS are equipped with powerful software PCMDIS common to all the range of the machines Hexagon Metrology.
|
|
|
Machines of measurement from which guidance is protected. this technology makes it possible to work in aggressive mediums of workshop, there or a machine of traditional gantry measurement quickly becomes inoperative
|
|
Features:
Particularly suitable for large components and high-accuracy work.
» Pneumatic counterweight for Z axis.
» Smooth and low-vibration motion in axes thanks to granite guides.
» Parallel drive of the two longitudinal axes, therefore no contouring error.
» Robust design with high load capacity.
» Brushless drive systems.
» Low air consumption.
» Wear-free data acquisition thanks to optoelectrical measuring scales.
» Resolution: 0.15µm
|
|
• High-accuracy natural stone guides permanently ensure excellent measuring accuracy,
• Precision air-cushion bearings,tried and proven thousands of times, assure high measuring accuracy, reduce energy input, and guarantee smooth, low-vibration movement,
• Non-contact scale rules ensure low-wear, high-precision data acquisition on all axes,Resolution: 0,15 µm
• Can be equipped with active vibration damping systems,
• Pneumatic counterweight for Z axis,
• Digital motors.
|
|
The SmartScope® Flash™ 500 offers all the great Flash features and performance in a large travel bridge-design system. Parts move on a precision DC motor-driven Y-axis stage while the optics assembly travels in the X-axis across a stable bridge cross member. This design assures rapid, smooth part translation and robust measurement performance.
An extended Y-axis travel of 600 mm is optional, and 300 mm Z travel is optional.
Every SmartScope Flash 500 is multisensor capable.
Whether your needs call for multisensor now or in the future, your SmartScope Flash is up to the task. Its advanced design allows the additional precision of multiple sensors, including touch trigger probes, micro-probes, and laser scanners. Field retrofits are easily accomplished.
|
|
SmartScope® Quest™ 250 is a full-featured coordinate measurement system that is designed to incorporate optical, touch probe, micro-probes, and laser sensors into a compact, benchtop platform.
It is specifically designed to measure smaller parts, or for situations where space is at a premium. Its rigid structural design provides full access to the measurement volume for fixturing flexibility.
|
|
The DM3500 is a compact, overhead dimensioning unit that automatically measures length, width, and height of packages as they are transported on a conveyor through the bar code scanning area.
The self-contained dimensioner is designed for simple installation over existing conveyor systems. No break is required in the conveyor belt. The unit’s overhead location eliminates the potential for damage that side and bottom-mounted systems encounter.
Typical Applications Include:
- Parcel revenue recovery
- Revenue recovery
- Trailer load planning
- Automatic rate charging
- Sortation accuracy
Outstanding Features:
- Accuracy of +/- 0.10” [0.25 cm] at belt speeds up to 600 FPM [3.0 MPS]
- Exclusive “find belt” software functionality enables “one button” setup and plug-and-play operation
- Eliminates the need for alignment of multiple components
- Uses time-tested design incorporating both solid-state laser diode and CCD array to capture package dimensions
|
|
Inspect3D supplies high-capacity gantry machines with air-cushion bearings for highest demands. An open gantry design is the ideal system, permitting easy access to the components to be measured.
Particularly suitable for large components and high-accuracy work.
» Pneumatic counterweight for Z axis.
» Smooth and low-vibration motion in axes thanks to granite guides.
» Parallel drive of the two longitudinal axes, therefore no contouring error
» Robust design with high load capacity.
» Brushless drive systems.
» Low air consumption.
» Wear-free data acquisition thanks to optoelectrical measuring scales.
» Resolution: 0.15µm
|
|
|
|
|
|
Measurable work pieces
- all types of gears with the standard Software package
with optional Software package:
- measurements of prismatic parts and Free Form Surfaces with Wenzel CM-Software
- Worms and Worm gears
- Bevel gears
- Tools like hobs, shavers and shapers
- Other rotational symmetric parts
- Special profiles
- Scanning of unknown contours
Technology:
- Bridge type GMM with rotary table integrated in the machine base
- Machine base of massive dark granite
- Active damping system
- Thermal stability through the use of identical material for base and axes
- Air bearings on the linear axes
- Wenzelgeco CNC-Controller designed to meet the spezial requirements of high precision measuremts
- Scanning 3D probe, optional probechanger
Technical data:
- Work piece diameter w/o probe changer min./max. 5 - 1000 mm
- Internal work piece diameter > 12 mm
- Module min./max. (0,2) 0,5-25 mm
- Helix angle < 90 °
- Measurable face width max. 600 mm
- Number of axes 4
- Measuring precision according to VDI/VDE 2612/2613 Gruppe I
- Axes travel X-Axis 1000 mm, Y-Axis 1200 mm, Z-Axis 800 mm
- Type of Rotary Table L400 (L300)
() optional
|
|
|
|
|
|
Measurable work pieces
- all types of gears with the standard Software package
with optional Software package:
- measurements of prismatic parts and Free Form Surfaces with Wenzel CM-Software
- Worms and Worm gears
- Bevel gears
- Tools like hobs, shavers and shapers
- Other rotational symmetric parts
- Special profiles
- Scanning of unknown contours
Technology:
- Bridge type GMM with rotary table integrated in the machine base
- Machine base of massive dark granite
- Active damping system
- Thermal stability through the use of identical material for base and axes
- Air bearings on the linear axes
- Wenzelgeco CNC-Controller designed to meet the spezial requirements of high precision measuremts
- Scanning 3D probe, optional probechanger
Technical data:
- Work piece diameter w/o probe changer min./max. 5 - 500 mm
- Internal work piece diameter >12 mm
- Module min./max (0,2) 0,5-20 mm
- Helix angle <90 °
- Measurable face width max. 300 mm
- Number of axes 4
- Measuring precision according to VDI/VDE 2612/2613 Gruppe I
- Axes travel X-Axis 500 mm, Y-Axis 600 mm, Z-Axis 400 mm
- Type of Rotary Table L300
() optional
|
|
| ... products without technical information |
| |
Model G300: Bag palletization robot, cartesian gantry, low throughputs
This basic machine consists of a Cartesian loading frame equipped with a robotized gripping arm.
It stores the bags one by one into a fixed gauge directly on the palette.
In its basic version, the supply of empty palettes and the evacuation of full palettes is carried out manually with a palette truck.
This very economical machine is dedicated to bags that are easy to palletize.
|
|
The Comarme palletiser robot was designed and manufactured to palletise cardboard boxes, bags and cans.
It consists of a load-bearing structure in steel with mobile parts in extruded aluminium. A compact design allows for its easy installation in confined spaces.
The Comarme palletiser range is broad and versatile, meeting the most widely varying customer requirements.
|
|
Model 542
Performance: up to 10 cycles/minute, dependent on product size, product weight and pallet pattern
Power consumption: approx. 14 kWA
Ultimate load: up to 25 kg
Pallet height incl. pallet: 2,450 mm
Pallet sizes
EURO: 1200 x 800 x 150 mm
Industry: 1200 x 1000 x 150 mm
CHEP: 1200 x 1200 x 150 mm
Operator convenience
Our PALPACK - Offline Software enables the simple changing of existing and the creating of new palletising patterns. The robot movements are generated automatically.
|
|
ROBOSAC P4
CARTESIAN PALLETIZERS FOR BAGS, CASES AND DRUMS.
TMI equipment allows the customer palletizing a wide range of products in several formats at different output levels.
A careful choice of materials, including high resistance steel for moveable parts, guarantees the highest quality for loaded pallets, reducing mass and avoiding inertias.
Characteristics:
- Optimization of occupied space.
- It allows its placing in reduced sites.
- Back is discharged through a grip. It allows bags overlapped each other. Grip is designed according to the bag and pattern type.
- Versatile systems to handle different packages.
- Motion positioning by means of numerical control (CNC).
- Telescopic arm can be optionally equipped in order to reduce the machine height.
- ATEX version under request.
|
|
High Level Bag Palletizer
AP-400 Series
Fully automatic palletizing system for plastic and paper bags. All electric design for a smooth and quiet operation. Produces high quality full-pallet loads. Capacities up to 35 BPM.
|
|
AUTOMATIC STRETCH WRAPPER AND PALLETIZER
- Penguin Automatic palletizer has been designed to arrange automatically a predetermined number of products in certain pattern and transfer them automatically to a pallet.
- Palletizers are manufactured in Left Hand & Right Hand models with stacking in single high or double high pallet loads of the products.
- Automatic stretch wrapping, PP Strapping, PLC with provision to interlink and to work in line with the palletizer are supplied to work in synchronization of the production of goods.
Features
- Machine is operated by pressurized hydraulic system
- Automatic packing without manual intervention
|
|
ROBY 1-PORTIQUE
Automatic granty robot
Output: 750 cartons/hour
The robot ROBY 1-PORTIQUE is adapted to palletize cartons, basket, sacks, shrink-wrapped bundles and tanks. It can take some packages in the same time with different pick-up system (sucker, pliers, magnetic, comb pliers for sacks) from different position and put them on different pallet with different layout.
The pick-up head rotates from 0 to 270° according to the layout that is planned.
The definition of the layout is done with the cartesian coordinates or if it is possible to control the approach speed. This last system is studied to render simple the programming.
ROBY 1-PORTIQUE can be complete with some optional, and so it become an automatic and performed machine.
The robot can work maximum with 1 pallet and the principal characteristic is: high productivity in little spaces!
The ROBY 1-PORTIQUE is also available in antiexplosive version: Serie ROBY PT/AD.
|
|
Due to their compact construction, the meurer CM/MPR palletising robot and the meurer CM/PPA portal palletiser can easily be integrated into existing end-of-line packaging systems and are suitable for various tasks.
- Able to palletise and de-palletise.
- Supplied with vacuum, form-fit and/or lifting forks gripping systems
- Layer pattern entry via Teach function within the operator panel
- Multi-axis servo system for accurate positioning onto the pallet
- Low-maintenance design
- Suitable for cases, film packs, trays, and boxes etc.
- Also available in stainless-steel construction
|
|
|
|
see the results for the following category : 
