|
|
|
|
|
|
TUBE TOOL is a complete solution for non-contact measuring inspection of tubes.
The Romer sensor is mounted on the OMEGA arm and associated to G-Tube software. It uses a non-contact laser technology offering workshop operators a fast, reliable and user-friendly way to measure.
The non-contact sensor avoids deformation during tube measurement, and is specifically designed for measuring tubes, wires and hoses. Thanks to Romer technology, tangents are measured without contact with the tube, permit to calculate the neutral fibre (X, Y, Z) and to determine the LRA (Length, Rotation, Angle) or T1MpT2.
Advantages:
Designed to be used in bending workshops.
OMEGA 2025, the most economical system for multiple applications.
Easy to use and efficient G-Tube Software.
Different sizes of sensors (microprobe, 1 ", 3") adapted to the diameter of the tube.
Non-contact tube measurement to avoid any risk of deformity.
Quick and repeatable mounting.
No calibration required of the sensor before the measurement.
Indicator laser to assist during the measurement.
180° angle measurement compatibility.
|
|
ArmTube and G-Tube : the latest technology in non contact measurement.
Non contact infrared and laser technology for no tube deflection during measurement.
-Simple and double precision measurement
-Works with 180° bent angles
-Option to move tube during measurement
-Cost effective solutions: no more expensive masters needed
-Minimum down time for new tubes in production
- User friendly software interface to measure quickly bent tubes
-Communication with many existing benders
The quick non-contact measurement solution for the inspection of bent tubes in your work shop.
|
|
MEASURING: QUALITY CONTROL AND MANAGEMENT INFORMATION
You, like all our customers, demand ever higher production capacity, quality and accuracy. This is particularly important for standard size products which subsequently undergo further operations, such as welding, bending and/or punching, performed by robots or other automated systems
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we measure it !
Further Length stop and measure systems, like Length stop and measuring system manual, Length stop measuring system with hand wheel and Length stop and measuring system with electronic controls cover our product range.
|
|
|
The AMPG permits rapid measurement of tubes and pipes in conjunction with laser tube measuring forks and FUTUREX TUBE software from ZETT MESS. The tube-measuring fork is slipped over the tube at the required measuring point. This interrupts two diagonal laser beams to generate a total of four switching points that are used to define the position. This tube measuring assembly can be used to measure all types of tubes and pipes ranging from the finest hydraulic tubes to exhaust pipes and even large pipes. ZETT MESS supplies tube-measuring forks in four sizes.
|
|
The AdData 'G' Plus is a revolutionary non-contact measuring machine for use specifically in the tube bending industry—to obtain data for bending machines and provide information for inspection purposes. The machine utilizes the latest 'G-Tube' technology for non-contact measurement.
In addition to its tube measurement capability, the AdData is equipped for use as a component development tool. A number of features are incorporated to assist in the design of new components including:
* Reverse tube
* Produce a mirror image
* Move bends
* Combine bends
* Split bends
|
|
| ... products without technical information |
| |
|
The laser-based LOTIS® Model QC-20 is the fastest and most accurate noncontact measurement system available for hose inspection. Operator error is virtually eliminated due to the QC-20%u2019s precise, simultaneous measurement of hose ID, OD, wall thickness and wall variation. All the dimensions are gaged with no product distortion automatically, in just a matter of seconds.
|
|
|
|
|
|
SA-76NC + BDB-70
Extreme Speed Tube Cutting and Deburring machines
HIGH PRODUCTION, FLEXIBLE AND i2® SYSTEM
SA-76NC Metal saw machine
BDB-70 Tube deburring
SA-76NC tube sawing machine can connect to BDB-70 double tube ends duburring machine. Besides the high speed tube cutting functions of SA-76NC, SA-76NC + BDB-70 has extreme speed in pipe cutting, even has high speed in loading, feeding, transporting and tube deburring.
The powerful and competent tube cutting line is capable of cutting various shapes of profiles such as round tube, rectangular, square and oval tube. As well as the working capacity of SA-76NC + BDB-70, the round tube can up to 80mm, and square tube is 70x 70mm. High speed metal saw machine.
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
|
|
General description:
Also in our double head end deburring equipment line is our Abtex tube deburring system. The system pictured is a hopper fed unit that deburrs both ends of tubes at a rate of up to 100 tubes per minute. Adjustments are easily made for varying tube dimensions. Once the system is activated, the hopper aligns the work pieces and directs them into the brushes. De-burred tubes exit the back of the deburring machine directly into boxes for shipment or into work bins for easy transport to other work stations. The Abtex tube deburring system is built to customer specifications.
|
|
|
Bewo deburring machines can be supplied with a manual or automatic feed. The automatic feed is the most popular choice, allowing the deburring machine to be installed in-line with the full range of Bewo automatic circular saws, saving many man hours and making automatic cycling possible. The DB-90 has 300 mm diameter brushes with a length of 600 mm. Bewo deburring machines are designed to deburr round, square and rectangular tube.
|
|
DEBURRING MAX 42x4 mm
MATERIALS AISI 316 TI - ST 37.4
WEIGHT 28 KG
STANDARD VOLTAGE 230V 50Hz 1PH
MOTOR POWER 0.18 KW
DIMENSIONS L x D x H 350 x 350 x 320 mm
REVOLUTIONS/MINUTE 50
INT./EXT. DEBURRING TOOL 6-42 mm included
|
|
The EMB patented technique of pre and final assembly of cutting rings reduce assembly time and costs whilst providing superior "leak free" characteristics and reliable reproducible assembly results. The entire process of tube preparation untill the final coupling run like clock work in no time at all, thank to our investment in "state of the art" machinery.
Our SPS controlled assembly units, in paricular, provide supreme functional and cost effective performance.
|
|
Machine suitable for removing INSIDE and OUTSIDE “burrs and sharp edges” that are normally created during cutting operations.
It is possible “deburr” round, oval, square, rectangular tubes, irregular shaped profiles made of iron, stainless steel, aluminium and plastic materials.
Machine is supplied ready to work with following STANDARD EQUIPMENT: adjustable universal holder for workpieces, motors with voltage 400V/50Hz, sevice keys, instruction book and CE conformity declaration.
|
|
For treatment of tubes and sticks ends
Abilities
Deflashing of round tubes and sticks with diameter from 10 mm up to 48 mm
|
|
| ... products without technical information |
| |
HEADER TUBE PUNCHING MACHINE :
The Header Tube Punching Machine is hydraulically operated and is suitable for punching holes in copper tubes. The center distance of the holes is 25.4mm. Each hole is punched by pressing the button located on the carriage. After every punching stroke, air is blown through the mandrel to blow out the punched blank. The tube clamp can be rotated to punch holes at different angular positions. The carriage houses the tube clamping assembly and this carriage is locked in position by a mechanical arrangement during the punching operation.
|
|
QUICK AND ADJUSTABLE NEW FEATURE HYDRAULIC DIE-CUTTING PRESS PI85
NEW DEVELOPMENTS IN THE LOCKSMITH'S MARKET
The PI85 hydraulic press is specifically designed for die-cutting tubes for the various cylinder locks available on the market, covering more than 90% of the models.
It permits the simultaneous cutting of the mechanism box hole with those for the latch and deadbolt. It is also possible to make the latch and deadbolt cuts independently in order to vary the distance between them.
The PI85 Incorporates a system with a scale In millimetres that controls the distance between the mechanism box and the latch and deadbolt from 18 to 37 mm approximately.
A distance between axles of 85 mm. Adjustable entrance points of 20, 25, 30, 35 mm.
MECHANISM BOX
Adjustable mechanism box length.
The mechanism box is always on the side and of 35,40,50 mm.
Approximate time taken to cut out the mechanism box slot is 58
seconds.
|
|
Descriptive :
Automatic tube loading with 3 versions :
Slope loader
Belt loader
Profils loader
Automatic alimentation of mandrel.
Unloader 2 positions.
The plate of work in the main part of the punching machine and all the tooling are on the plate.
Possibility to have 2 or 3 differents plate.
So
Are you change very quickly the plate of work ?
Are you change very quickly the tooling in the plate of work ?
Big flexibility and simple tooling.
Caractéristiques :
Power maxi 12 tonnes.
Section maxi tube 80 x 80 mm.
Punching with or without déformations.
Length of the machine de 4, 6 or 7 m.
|
|
Descriptive :
CNC machine with 2 axis.
Automatic with manuel front loading.
The machine can be equipped with a plate of work incorporating punching and/or cutting.
Punch on all 4 sides of the tube.
Fast change tooling.
Caractéristiques :
Power maxi 12 tonnes.
Section maxi tube 80 x 80 mm.
Punching with or without déformations.
Length of themachine de 1 m to 7 m.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
