|
|
G-SCAN RX 2 is a 3D scanning probe for reverse engineering and inspection of complex forms. G-Scan RX 2 gives you minimum engineering downtime compared to all other traditional contact measuring tools.
G-Scan RX 2 is compatible with all Ethernet generation ROMER measuring arms.
G-Scan RX 2 is running with a standard 6 axis arm thanks to an integrating rotating axis inside the camera. Compatible with all existing reverse engineering and surface inspection software |
|
O2DS Scanner measures where others give up - think of hot rolled steel.
The O2DS scanner is an optoelectronic unit for non-contact precision measurement in two dimensions, developed for 2D- / profile-measurement in all kinds of industrial applications.
The O2DS is a laser scanner of the Flying Spot type. The measurement is performed by oscillating the triangulation plane over an angel up to 50°. A fine focused/collimated laser beam is diffusely reflected from the surface of almost any kind of object, and a CCD-camera records the image through an objective.
The measuring frequency is 2 kHz. Different scanning angels can be combined with four different measuring ranges. The smallest range covers 80 to 180 mm and the largest 380 to 1080 mm. The smaller the measuring range is, the higher the resolution will be.
As well as the ODS sensors, the 02DS scanner can be delivered as HT (high temperature) models for measuring on objects with surface temperature up to about 1200°C. Used under such conditions, precautions must be taken to protect the scanner from the heat.
Scanners can furthermore be customized to other than standard scan angels and measuring ranges.
For more detailed information please study the PDF/datasheet on our website www.sensor.dk
|
|
| The Optix 400 series is the latest offering by 3D Digital Corporation. They provide compact, lightweight, and tripod mountable scanning with USB plug and play ease for Windows computers. The Optix scanners have the option of connecting external digital cameras in order to provide extremely high quality color texture information. This color option is available for Optix 400M and Optix 400H. |
|
- Complete 3D Scanner Software Solution
- Produce 3D Images quickly and Effectively
- USB Plug and Play
- Exports STL, OBJ, ASCII, and other file formats
- Imports directly into popular CAD and CAM programs
Software Features
- Merges and Aligns multiple Scans together
- 3D Viewer
- Color and Appearance Adjustments
- Scaling and basic Measuring
- Export point cloud and mesh formats
Applications
- Reverse Engineering
- Orthotics
- Design
- Animation
- Footwear
The price of our ESCAN is US$7,095 which comes bundle with reverse engineering software, merging and alignment software STL, ASCII, VRML output. Our EScan system achieves what other high quality laser scanners can at an affordable price, bang-for-your-buck accuracy vs price. The EScan offers an affordable alternative to our existing Optix 400 series product line-up, when the high re-solution is not necessary. |
|
| Optix 400S is upgraded based on model 100. It has the same scan range as model 100, but both accuracy and resolution have been dramatically improved. With Optix 400S, the applications of 3DD scanners have been expanded to cell phone and jewelry industries. Optix 400S is now suitable for small objects with great details. |
|
3D Laser Scanner- resolution of reverse project.
Put laser scanner head on Leader’s all kinds CMMs to make a Laser Scanner, cooperating with contact CMM, it can do high speed, high accuracy laser scanning and inspection, it make reverse project never so easy.
Function features:
1.high resolution, high accuracy, rapid non contact scanning
2.special filtration technology, measuring without effect of light
3.Small laser scanner head ,can be assembled on PH10, MH8, manual rod.
4.take standard ball as calibration tool, easyto calibrate
5.Can measuring any parts in the stated area.
6.Can change to any direction in 3 D space, measuring same part from any angle, realize the complete inspecting of complicated parts, measuring data from different angle can be integrated together. |
|
Optech's SHOALS Airborne Laser Bathymeters are a well-proven tool, used for hundreds of surveys in a wide range of applications. Based on the same principle as sonar, but using light instead of sound, SHOALS gather shallow water, shoreline and topographic (ground elevations) data simultaneously, integrating land and water measurements in the same data set. Depth and position measurements are accurate to IHO Order 1.
As well as surveying water depths from the air, and thus avoiding the time and access problems that bedevil other surveying methods, SHOALS can identify underwater objects as small as 2x2x2 metres resting on the ocean floor.
The SHOALS system combines a powerful, probing laser radar (lidar) and high-speed electronics on an airborne platform. Operating at altitudes of 200-400 metres, with laser spot spacing variable from 2x2 to 5x5 metres, SHOALS has a typical maximum depth penetration of 40-50 m in clear water, 20-40 m in coastal waters, and less than 20 m in more turbid inland waters.
|
|
Optech's ALTM Airborne Laser Terrain Mapper acquires digital elevation data with accuracies equivalent to those of GPS, but thousands of times faster.
- High-resolution, high-accuracy, digital elevation data
- Day and night operation
- Independently geo-referenced intensity and elevation data
- Ranges to trees and to the ground beneath in a single pass: Simultaneous first- and last-pulse capability
- Rapid coverage and data output: 1000 square kilometres in less than 12 hours, with DEM data available within 24 hours
- Range measurements independent of target composition: Bright targets such as sand or snow give the same range as dark targets such as asphalt
|
|
| API has created a new measurement instrument for the machining and metrology industry in the form of a composite scale bar. The composite scale bar has been designed to be deployed for testing and verification in accordance with ASME B89. This will allow users of Laser Tracking Systems, CMMs, and other measurment devices to verify performance in a lab or shop floor environment |
|
| RTM's laser measurement systems allow the dimensional check of cylindrical objects through the evaluation and record of outer/inner diameter/dimension and of their overall length. Non-contact triangulation systems allow recording the distance of the workpiece from the sensor. Measurement is obtained by comparing signals of couples of opposed sensors to gauge a defined dimension By performing a vertical scanning through a controlled axis, it is possible to record the internal and external profile of the workpiece, along a complete cross section of the piece. By turning the gauge around the workpiece axis, it is possible to increase at will the numbers of sections to be measured, in order to detect contour defects (circularity, parallelism, ...). |
|
| RT - 100 optional Package that can be used for the calibration of Rotary Tables and the Rotary aces of blots some to 5 or 6 Aces. The operating field is of 360° with increments until 10 degrees. Precision 0,2 second of degree arc (0,06 millesimi). Automatic compensation for the assembly eccentricity. Portable Versione.economica and to motorized manual or automatic drive with servocontrol. |
|
| ... products without technical information |
| |
|
|