|
|
Flexible Gauge Used at the Shop Floor QM-Measrue:
- Has achieved simple measurement of complicated forms at worksite.
- Allows 3-D measurement in much the same way a gage is used.
- For detailed information, leaflet is available on request.
Manual CMM Crysta-Plus M776/7106:
- Ultimate manual CMM for maximum ease of use
- Allows retrofit to CNC in future.
- For detailed information, leaflet is available on request.
Multiarticular Portable CMM Measuring System SA2-50-18 SpinArm II:
- CMM that has a large measuring space with a 6-axis multiarticular structure
- Excellent in portability and can be carried up to the workpiece position.
|
|
Werth Benchtop
ScopeCheck® 200 CNC
- The gateway multisensor coordinate measuring system with automatic image analysis and CNC positioning.
•·Design: compact and benchtop sized multisensor CMM; L-shaped/cantilever configuration with rigid steel weldment construction and ball bearing guideways; stacked, motorized X-Y stages and steel Z axis ram assembly
•·Measuring Range: X=200 mm; Y=150 mm; Z=200 mm
•·Available Measuring Sensors: Noncontact - Werth image processing (IP) video sensor with fixed telecentric objective; Werth Zoom sensor (patented); Werth 3D-Patch (patent pending); Werth Laser sensor, Contact - Renishaw point to point touch trigger sensor; Werth Fiber (micro) sensor (patented); Werth Contour sensor
•·Applications: plastic connectors and housings; stamped/formed parts; medical industry tools and fixtures; printed circuit boards (PCBs); watch plates; gears; plastic injection molding components
|
|
Contour Measurement Contracer CV-2000:
- The digital detector independent of measuring magnification is adopted.
- Z axis (Height) Measuring Range: 40 mm
- X axis (horizontal) Measuring Range: 100 mm
Hybrid Surftest/Contour Measurement Formtracer Extreme CS-H5000 CNC:
- CNC surface roughness/contour measurement machine
- Aspherical lens can be automatically measured with high accuracy.
CNC Contour Measurement Contracer Extream CV-4000CNC:
- CNC Contour Measuring Instrument
- Has greatly distributed to the improvement in productivity and efficiency.
- Resolution for contour detector: 0.05 um
|
|
Inspect3D supplies high-capacity gantry machines with air-cushion bearings for highest demands. An open gantry design is the ideal system, permitting easy access to the components to be measured.
Particularly suitable for large components and high-accuracy work.
» Pneumatic counterweight for Z axis.
» Smooth and low-vibration motion in axes thanks to granite guides.
» Parallel drive of the two longitudinal axes, therefore no contouring error
» Robust design with high load capacity.
» Brushless drive systems.
» Low air consumption.
» Wear-free data acquisition thanks to optoelectrical measuring scales.
» Resolution: 0.15µm
|
|
Lab grade Multisensor System. Precision acceptable for lab use, yet built to reside in a typical metrology environment.
- Quality lab standard.
Measurement system providing part certification with the highest level of confidence
- High Precision.
Minimizes measurement uncertainty, while maximizing your manufacturing tolerance window
- Rapid Measuring Speed.
Increase manufacturing confidence by rapid and repeatable measurements of significant sample lots.
Features:
- Bridge type measuring center with stationary bridge and moving table
- Separated electronic cabinet
- For rapid optical and tactile 3D Measurements
- Optimal Price-Performance Ratio
- The economical Metrology for your production control
- Multisensor head with fixed lens optics, optional touch probe and laser sensor
Application:
- Small 3D parts from a variety of materials (e.g., plastic connectors, watches, etc.)
- Precision 3D parts with small tolereances (e.g. injectors, medical parts, etc.)
- Complex turning tools, in combination with rotary and swirelling table (e.g. Drill, milling tool,etc.)
|
|
These machines have the following features, in addition to the customary MORA quality elements:
» The machines are completely enclosed including the x-axis guidance system if required
» All machines operate in continuous, 5-axis mode, with the result, for example, that a total of fifteen axes are active for measurements in a coordinate system in the case of an underfloor system
» Travel speeds up to 850 mm/sec
» Guide rails fully hardened and chromium-
plated safety from rust, excellers mounted in special hardened bushes (bearings); smooth and safe running
» Electronic path encoding system (optical or - in case of coarse dust, etc., magnetic)
» Patented cable-breakage safety system
» High-dynamics drive systems with speeds up to 800 mm/sec.
|
|
Mµ-Tos
These machines have the following features, in addition to the customary MORA quality elements:
» The machines are completely enclosed including the x-axis guidance system if required
» All machines operate in continuous, 5-axis mode, with the result, for example, that a total of fifteen axes are active for measurements in a coordinate system in the case of an underfloor system
» Travel speeds up to 850 mm/sec
» Guide rails fully hardened and chromium-
plated safety from rust, excellers mounted in special hardened bushes (bearings); smooth and safe running
» Electronic path encoding system (optical or – in case of coarse dust, etc., magnetic)
» Patented cable-breakage safety system
» High-dynamics drive systems with speeds up to 800 mm/sec.
|
|
Description:
LINEAR length measuring instruments from Mahr are ideal for use as setting and adjusting instruments in the manufacturing environment. They allow precise setting of internal and external comparators, internal precision measuring instruments, snap gages with displays and many other measuring instruments.
As an infitnitely adjustable measurement standard, the LINEAR series is also an economical alternative to setting gages.
The simple handling and short measuring time are key advantages.
A measuring force control feature can be activated to allow measuring results independent of the user for both internal and external measurements.
Based on the steel scale, the LINEAR series ensures reliable measuring results over the entire measuring range. Compatability with national standards means that LINEAR length measuring instruments are DN EN ISO 9000-compliant.
Applications :
- Setting measuring instruments with displays such as the Multimar 844T
- Setting two-point internal measuring instruments such as the 844 N
- Checking setting standards
- Checking calipers
- Checking inside micrometers
- Measuring cylindrical parts
- Measuring internal dimensions and bores etc.
|
|
TUBE TOOL is a complete solution for non-contact measuring inspection of tubes.
The Romer sensor is mounted on the OMEGA arm and associated to G-Tube software. It uses a non-contact laser technology offering workshop operators a fast, reliable and user-friendly way to measure.
The non-contact sensor avoids deformation during tube measurement, and is specifically designed for measuring tubes, wires and hoses. Thanks to Romer technology, tangents are measured without contact with the tube, permit to calculate the neutral fibre (X, Y, Z) and to determine the LRA (Length, Rotation, Angle) or T1MpT2.
Advantages:
Designed to be used in bending workshops.
OMEGA 2025, the most economical system for multiple applications.
Easy to use and efficient G-Tube Software.
Different sizes of sensors (microprobe, 1 ", 3") adapted to the diameter of the tube.
Non-contact tube measurement to avoid any risk of deformity.
Quick and repeatable mounting.
No calibration required of the sensor before the measurement.
Indicator laser to assist during the measurement.
180° angle measurement compatibility.
|
|
TubeInspect
The new dimension of piping measurement
TubeInspect, an optical tube measuring system, incorporates advanced technology for the high-precision measurement of tubes, the determination of set-up and correction data and quality assurance of the end product. TubeInspect can entirely replace mechanical gauges.
|
|
G-SCAN RX 2 is a 3D scanning probe for reverse engineering and inspection of complex forms. G-Scan RX 2 gives you minimum engineering downtime compared to all other traditional contact measuring tools.
G-Scan RX 2 is compatible with all Ethernet generation ROMER measuring arms.
G-Scan RX 2 is running with a standard 6 axis arm thanks to an integrating rotating axis inside the camera. Compatible with all existing reverse engineering and surface inspection software
|
|
Articulated SIGMA Arms
The SIGMA arm completely matches all your metrology needs thanks to exclusive concept "MODULARM": 10 lengths of arms available for measurement without limit. With the longest arm length available on the market, the SIGMA series exceeds the capabilities of other measurement equipment The SIGMA arm offers total flexibility thanks to the security of the wireless communication and is one of the lightest arms in its class.
|
|
DPAPro
The mobile 3D industrial measuring system with high resolution digital camera
Typical Applications for DPAPro:
* Roundness inspection e.g. tunnels or tanks
* Deformation analyses in vehicle safety tests
* Inspection of large steel constructions
|
|
We care for best handling:
- Three sizes available for heavy weights of tools and large tools or work pieces
- We care for best handling:
- Permanent horizontal position of the tool
- Robust execution by aluminium diecasting and stainless steel shafts
- Ears for the cable guide are integrated
- Counterweight by adjustable balancer
- Universal tool fitting
- Fixing is made by our stand support with 3 fixing holes and keyway to clamp
- GG40 working radius from XXmm up to XXmm, max. torque 40 Nm
- GG150 working radius from XXmm up to XXmm, max. torque 150 Nm
- GG500 working radius from XXmm up to XXmm, max. torque 150 Nm
|
|
Features:
MarForm MFU 100 offers performance and possibilities in the reference class which in the past were only possible with much larger investments.
Thanks to its active air-conditioned cabin, the machine can also be used on the shop floor. Shorter distances and a faster intervention into the production process control reduce your costs and optimize the quality of your products.
A high degree of automation is achieved through themotorized centering and leveling table, which is a component of Formtesters, and the use of the motorized T7W probe.
Because of the complete separation of machine control and profile evaluation, the MFU 100 is easily expandable and ready for the future. The addition of other languages or special
evaluations is possible, as well as the implementation of new standards. The MFU 100 is already prepared for the use of new sensor technologies.
The MarWin software package offers all the features of a modern measurement and evaluation software. As a matter of course, impressive records and the electronic documentation on company networks are also available.
- Maximum measuring accuracy
- Software package MarWin
- Future-proof
|
|
Rotary Precision Instruments "GEM" machine has been developed to acquire and analyse geometric data from component parts measuring Roundness, Run-out, Flatness and Parallelism.
The system measures up to 4 features simultaneously including bores, outside diameters and features interrupted by slots and bolt holes. Each channel takes 3,600 data points per revolution with high sampling rates enabling the use of sophisticated filters and digital signal processing techniques.
The measurement data is collected via a high accuracy rotary axis and bi-directional gauge heads supported on a ridged column unit.
The system has been specifically designed for use in a shop floor environment so enabling accurate and meaningful data to be collected from a high ambient noise, high vibration background. Features include centring and leveling of component parts, floating datum's with gauge head alignment achieved via laser guides.
Typical components 2,000mm in diameter and 2,000mm in height weighing up to 11,500kg can be accommodated and supported for measurement purposes via bespoke fixturing. Machines for larger application are available on request.
|
|
Features:
MMQ 400 can be used in all circumstances for comprehensive workpiece evaluation to DIN ISO 1101. High-precision Z and X measuring axes make it possible to perform any form measuring
task. There are versions of MarForm MMQ 400 for
- High-precision workpieces
- Unusually long workpieces
- Large and heavy workpieces
- Use in production environments or the precision inspection room
You can select between a variety of modules which can be used to customize the MarForm
MMQ 400 to your precise requirements:
- Motor-driven or manual centering and tilting table
- Vertical axis (Z) with measuring length of 500 mm/19.7 ' or 350 mm/13.8 "
- Horizontal axis (X) measuring axis with length of 180 mm/ 7.1 " or 280 mm/11.0 "
- With digital linear scales in X and Z axes
Description:
The MarForm MMQ 400 is available as a 'semiautomatic measuring station' with a manual centering and tilting table or as a 'fully automatic measuring station' which is conveniently fitted with a motor-driven centering and tilting table and the T7W probe. This makes it possible to test parts with high precision without operator intervention. The Marform MMQ 400 Formtester can be used in all applications for comprehensive workpiece evaluation to DIN ISO 1101.
|
|
Features:
- Simplest to use roundness gage on the market
- Touch Screen user interface
- No keyboard or mouse required
- Precise and fast measurement results
- Mobile due to its low weight and convenient size
- Fast workpiece alignment thanks to computer support
- Centering and tilting screws for rough and fine adjustment
- Suitable for use in workshop since no compressed air connection is required
- Encoders in X and Z feed position directly to the sw (MMQ 100 PLUS)
Application :
- Roundness (also in a sector)
- Flatness (out of one circle)
- Concentricity
- Coaxiality
- Radial run-out
- Axial run-out
- Circular parallelism of top and bottom faces
- Harmonic Analysis
|
|
Precision hard stone base 400 x 600 mm
Measuring range :
X axis : 150 mm
Y axis : 150 mm
Precision slides mounted on roller bearings
Endless fine adjustment of the X and Y axis
Electronic measuring system with glass gauges on both axis, resolution 0,001 mm, accuracy of gauges : ±0,003 mm
High resolution colour camera system with changeable objectives with 25x, 65x, 150x magnificatio
|
|
The Vertex Measuring Center is a high precision solution for smaller parts. Designed with the future in mind, the Vertex has a compact design, machine-side electronics, and an external computer. These features provide for high reliability, simple USB setup, and easy upgrades.
Powerful Machine Vision System
All Systems are Probe-Ready
Programmable 12x Zoom Lens
42 Channel Lighting System
"Mono-Rail" Bearing Design
Fast Servo Motor Control
Two Sizes
200 x 150 x 150 mm
300 x 300 x 150 mm
|
|
Manual Type Vision Measuring Machine Quick Scope:
- Color CCD camera
- Auto-focus is provided (QS-L/AF)
- For detailed information, leaflet is available on request.
2-D Manual Type Vision Measuring Machine Quick Image:
- Field of view 32 x 24 mm Long depth of focus /-11 mm
- 1.3million pixel Digital camera & Digital zoom
- For detailed information, leaflet is available on request.
CNC Vision Measuring Machine Quick Scope:
- Program control zoom lens
- Color CCD camera
- For detailed information, leaflet is available on request.
|
|
MANUAL VIDEO SYSTEMS
Video systems provide for easy manual measurements using a video image and precision encoders. An operator views a video image and adjusts the zoom magnification, lighting, and focus as needed. A metrology readout or software enable a variety of measurements.
Seven Model Sizes
150x150x150 mm
300x300x150 mm
300x300x300 mm
600x450x150 mm
600x450x300 mm
900x600x150 mm
900x600x300 mm
|
|
|
RTM's laser measurement systems allow the dimensional check of cylindrical objects through the evaluation and record of outer/inner diameter/dimension and of their overall length. Non-contact triangulation systems allow recording the distance of the workpiece from the sensor. Measurement is obtained by comparing signals of couples of opposed sensors to gauge a defined dimension By performing a vertical scanning through a controlled axis, it is possible to record the internal and external profile of the workpiece, along a complete cross section of the piece. By turning the gauge around the workpiece axis, it is possible to increase at will the numbers of sections to be measured, in order to detect contour defects (circularity, parallelism, ...).
|
|
With this new developed measuring machine all kinds of gears, worms, worm gears, bevel gears, shafts and other rotational symmetrical parts can be measured. The scanning of unknown contours is possible as well. An extensive software package is available.
The technology:
The machine base consists of a massive dark granite block mounted on a steel construction. The entire system is installed on passive (or optional active) vibration absorbers. To achieve the same thermal behaviour, all axes as well as the basis are made of dark granite. Outstanding features of this system are the use of air bearing guide ways in all axis as well as on the rotary table and a special controller especially designed for the measuring technique, together with a powerful, easy to use, Windows based measuring software. The machine is equipped with a Renishaw scanning probe head.
Technical data:
- Work piece diameter min./max. 5 - 500 (600) mm
- Internal work piece diameter >12 mm
- Module min./max. (0,2) 0,5-20 mm
- Helix angle < 90 °
- Number of axes 4
- Measuring precision according to VDI/VDE 2612/2613 Gruppe I
- Axes travel X-Axis 500 mm, Y-Axis 320 mm, Z-Axis 650 (800) mm
- Distance between centers min/max 20 / 900 (1200) mm
- Type of Rotary Table L400 (L300)
( ) optional
|
|
With this new developed measuring machine all kinds of gears, worms, worm gears, bevel gears, shafts and other rotational symmetrical parts can be measured. The scanning of unknown contours is possible as well. An extensive software package is available.
The technology:
The machine base consists of a massive dark granite block mounted on a steel construction. The entire system is installed on passive (or optional active) vibration absorbers. To achieve the same thermal behaviour, all axes as well as the basis are made of dark granite. Outstanding features of this system are the use of air bearing guide ways in all axis as well as on the rotary table and a special controller especially designed for the measuring technique, together with a powerful, easy to use, Windows based measuring software. The machine is equipped with a Renishaw scanning probe head.
Technical data:
- Work piece diameter min./max. 5 - 1000 mm
- Internal work piece diameter > 12 mm
- Module min./max. (0,2) 0,5-25 mm
- Helix angle < 90 °
- Number of axes 4
- Measuring precision according to VDI/VDE 2612/2613 Gruppe I
- Axes travel X-Axis 1200 mm, Y-Axis 550 mm, Z-Axis 1000 mm
- Distance between centers min./max. 50 - 1200 mm
- Type of Rotary Table H750/1500 (H750/3000)
( ) optional
|
|
With this new developed measuring machine all kinds of gears, worms, worm gears, bevel gears, shafts and other rotational symmetrical parts can be measured. The scanning of unknown contours is possible as well. An extensive software package is available.
The technology:
The machine base consists of a massive dark granite block mounted on a steel construction. The entire system is installed on passive (or optional active) vibration absorbers. To achieve the same thermal behaviour, all axes as well as the basis are made of dark granite. Outstanding features of this system are the use of air bearing guide ways in all axis as well as on the rotary table and a special controller especially designed for the measuring technique, together with a powerful, easy to use, Windows based measuring software. The machine is equipped with a Renishaw scanning probe head.
Technical data:
- Work piece diameter: min./max. 5 - 400 mm
- Internal work piece diameter: >12 mm
- Module: min./max (0,2) 0,5-15 mm
- Helix angle: <90 °
- Number of axes: 4
- Measuring precision according to: VDI/VDE 2612/2613 Gruppe I
- Axes travel: X-Axis 400 mm, Y-Axis 220 mm, Z-Axis 500(650) mm
- Distance between centers: min/max 20 / 650 (900) mm
- Type of Rotary Table: L300
( ) optional
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we measure it !
Further Length stop and measure systems, like Length stop and measuring system manual, Length stop measuring system with hand wheel and Length stop and measuring system with electronic controls cover our product range.
|
|
Traditional angular contact ball bearing measuring devices still use manual or semi-manual machines: a low degree of precision is obtained and the process time is long. The Bussi contact angle measuring machine is extremely precise, reliable, fully automatic and fast. It combines electronics with top-level engineering and pneumatics. It features:
Data setting: a computer stores the bearing data it is necessary to measure and is input just once. Every time there is a type changeover, only the bearing code needs to be recalled, thereby avoiding error and time wasting. Storage capacity: 500 types of bearing.
Automatic measurement: it makes two checks simultaneously, the contact angle measure and that all the balls are present. Field of measurement: 0° to 89.9°
Precision and repeatability: precise to ± 0.2 ° with high measurement repeatability. This performance can depend on the level of precision achieved when the bearing is constructed.
Measurement speed: the process is extremely quick, between 14 and 17 sec, with a capacity of up to 257 pieces/hr. Maximum type changeover: < 4 min
Optional automation for lines
|
|
|
