|
|
2D triangulation sensors (Laser Scanners)
RF620 Series
Application domain
The laser scanners are intended for non-contact measuring and checking of surface profile, dimensions, sorting and sensing of technological objects. The series includes 13 standard scanners (100 profiles/s for the full range) and 9 models of High Speed scanners (250 and 500 profiles/s for the full range)
Operating principle
Operation of the sensors is based on the principle of optical triangulation
Radiation of a semiconductor laser is formed by a lens in a line and projected to an object . Radiation scattered from the object is collected by the lens and directed to a two-dimensional CMOS-array. The image of object outline thus formed is analyzed by a signal processor, which calculates the distance to the object (Z-coordinate) for each point of the set along the laser line on the object (X-coordinate).
|
|
We provide scanning technology to the largest sawmill equipment manufactures in the wood manufacturing industry. Today, we have 10,000 sensors installed in the field. DynaVision high speed, high accuracy sensors support more effective, faster optimization software and machinery. Our products allow OEM’s and Integrators to design an optimizer that increases yield and profitability for their customers – in other words a value-added optimizer.
Our Wood applications division works closely with System Integrators & Original Equipment Machine Suppliers to deliver the most effective solutions for their particular sensor vision needs.
|
|
|
|
|
|
O2DS Scanner measures where others give up - think of hot rolled steel.
The O2DS scanner is an optoelectronic unit for non-contact precision measurement in two dimensions, developed for 2D- / profile-measurement in all kinds of industrial applications.
The O2DS is a laser scanner of the Flying Spot type. The measurement is performed by oscillating the triangulation plane over an angel up to 50°. A fine focused/collimated laser beam is diffusely reflected from the surface of almost any kind of object, and a CCD-camera records the image through an objective.
The measuring frequency is 2 kHz. Different scanning angels can be combined with four different measuring ranges. The smallest range covers 80 to 180 mm and the largest 380 to 1080 mm. The smaller the measuring range is, the higher the resolution will be.
As well as the ODS sensors, the 02DS scanner can be delivered as HT (high temperature) models for measuring on objects with surface temperature up to about 1200°C. Used under such conditions, precautions must be taken to protect the scanner from the heat.
Scanners can furthermore be customized to other than standard scan angels and measuring ranges.
For more detailed information please study the PDF/datasheet on our website www.sensor.dk
|
|
Cobra 2D is a portable laser scanning system that provides high resolution linear profiles. And since it uses low power laser light, it is ideal for fragile or pliable parts that have critical surface contours. It's quick and easy to measure height, length, slope, and radius.
Its Scan-X®software makes scanning easy. View and analyze scans for the dimensional information you need. The heart of the system is field proven DRS™ (Digital Range Sensor) technology, combined with accurate motor control, and data analysis software. Since Cobra 2D scans by moving the DRS sensor over the surface, no special fixturing is required. Cobra is portable. When used with a laptop computer, you can take it where you need it.
|
|
The Z500 laser measurement sensor solves the problem of how to measure a workpiece in-line for both width and height/depth at one time. Compared to single axis laser and vision systems, Z500 provides a unique advantage by measuring in X axis and Z axis simultaneously, improving accuracy and speed of the inspection.
Performs simultaneous width and depth/height measurements in one cycle
Eight measurement modes available, including a combination of step, width and edge position
No work piece or sensor movement required: improves measurement precision and reduces measurement cycle time
Z500 performs all data processing and calculations, eliminates need for other controllers
Two-dimensional SW-CCD and multiple incident level control allow shape measurement of curved work pieces and a wide variety of other surfaces
|
|
Cobra™ 3D adds a motorized X axis to produce scans over an area as large as 2 " x 2".
Scan-X™ software makes it easy to scan and analyze the results.
Cobra 3D uses DRS™ (Digital Range Sensor) technology, motorized X and Y axis motion, a heavy duty granite base, and Scan-X software.
Its Scan-X® software makes scanning easy. View and analyze scans for the dimensional information you need. The heart of the system is field proven DRS™ (Digital Range Sensor) technology, combined with accurate motor control, and data analysis software. Since Cobra 3D scans by moving the DRS sensor over the surface, no special fixturing is required.
|
|
Cobra™ 3D is a non-contact measuring instrument capable of automatically acquiring a series of linear profiles in order to map an area for 3D analysis. 3D profiles provide important detail easily missed in a single linear profile. For example, the symmetry of a critical feature clearly shows in a 3D plot. Scanning an area also proves that the apex of a feature was scanned, an important capability not easily verified with a single linear scan.
Cobra 3D uses proven DRS™(Digital Range Sensor) laser technology to scan surfaces with up to 0.125 µm Z height resolution. Computer controlled motors move the DRS over the part while a precision stage translates the part beneath the DRS to build up a series of linear scans. Scan-X® analysis software controls the process and presents the results graphically and numerically.
The optional video camera makes setup even easier and provides live color imaging of the scanning process for visual verification of the scan location on the part.
|
|
|
|
|
|
LMC-M-M2D-LASER for Profile-Contour Scanning
The Scanner M2D provides 2-dimensional measuring of profile heights. The measured objects may consist of various materials. A laser line is projected onto the target and the distance to several points of the object is measured by triangulation. The Scanner is suitable for the geometric profile recognition and distance measurement. The height (Z-axis) by distance (X-axis) is measured. The result is the contour of the object at the point of measurement. Every 20 ms a complete scan of 283 points of measurement, or every 40 ms a scan with 566 points of measurement is done. The measurement range works from 5...1200 mm (X-axis) and 8...600mm(Z-axis).
Typical applications
Precise guidance of handling-robots:
– disc mounting, positioning of car-bodies, gap adjustment in the automotive industry
– welding seam tracking and quality assurance
fast measurement of:
– fast moving objects
– gaps
– edges
– width and depth of slots
– 3D shapes and profiles
– SMD components in the production process
Parts handling
– collision avoidance
– object presence and positioning
|
|
MEASURING: QUALITY CONTROL AND MANAGEMENT INFORMATION
You, like all our customers, demand ever higher production capacity, quality and accuracy. This is particularly important for standard size products which subsequently undergo further operations, such as welding, bending and/or punching, performed by robots or other automated systems
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we measure it !
Further Length stop and measure systems, like Length stop and measuring system manual, Length stop measuring system with hand wheel and Length stop and measuring system with electronic controls cover our product range.
|
|
CTS02 Compression - Tension - Sensor
The Compression Tension Sensors CTS02 was developed for the precise measurement of large forces, acting in axial direction.
For this purpose, the outer ring is flanged to the mounting surface and the force passes into the centre bore.
Features
Low profile
Insensitive to off-center forces
For dynamic and static force measurement in compression-tension mode
Design with nickel plated surface
|
|
This Low Profile Tension & Compression Load Cell has high accuracy. It has Nonlinearity of ±0.1%, Deflection of 0.003" nominal and Operating temperature of -60° F to +200° F. The standard LRF300 Low Profile Tension & Compression Load Cell can be modified or customized to meet your requirements and most capacities are in our inventory, making them available for 24 hour shipping. Similar to our entire Load Cell product line this model is manufactured in USA and uses metal foil strain gauge technology.
Product Highlights:
Light Weight
Low Deflection
2024 Aluminum Construction
In both Tension & Compression
Low capacity applications
Utilizes Metal Foil Strain Gauge Technology
|
|
APPLICATIONS:
The low profile load cell type 142 can be used in small,
medium and high loading capacity weighing systems.
Some applications are:
- Weighing in hoppers, tanks, silos, etc.
- Weighing platforms
MAIN FEATURES:
- Water-proof
- Side load high resistance
- Stainless steel
- Soldered with microplasma
- Standard nominal load from 500 to 100.000 kg
- High precision (equivalent to OIML C3)
NOMINAL LOAD: ton 0.5-1-2-5-7,5-10-15-20-30-50-100
|
|
Flat pressure force cell Type M-0061
Flat pressure force cells doses measure the pressure force in terms of the most different mechanical components.
Output: a) DMS
b) Current 4-20 mA
Options:
Pre-amplifier 4-20 mA built in
|
|
LPD Low Profile Disk, High Capacity Load Cell
These load cells are constructed with high grade alloy steel and come complete with 20 foot load cell cable. The LPD are available in capacities ranging from 5,000 lbs. up to 100,000 lbs. and are designed for low profile scales/applications.
Load Cell Technology
- Simplifies load measurements
- Meets OIML and HB44 Class III Standards
Rugged & Reliable
- High Grade Alloy Steel construction
- Mechanically robust design
|
|
|
SMD can manufacture a load cell or force sensor to measure anything, even something as complex as the human eye! Our load cells are designed and manufactured using our own proprietary thin film strain gauge process for greater stability and accuracy. Our load cell applications include weighing scales, non-invasive medical sensors, pharmaceutical testing, aerospace and industrial measurements. Whether you need an "off the shelf" load cell or custom engineered load-cells, let SMD design an ultra low profile, button style or overload proof sensor for you. We are the world leader in miniature load cells and low profile load cells.
|
|
| ... products without technical information |
| |
Particularly safe:
- New double safety protection through safety microcontact rail beneath the shear blades·
Particularly economical:
- Modular design (accessories) allows more economical retrofitting
- Long service life due to optimized bearings (needle bearings) 20 cykles per hour, 2-shift-operation·
Particularly productive:
- Harmonious, jolt-free raising + lowering movement
- Optimum ergonomics due to precise product positioning·
Particularly flexible:
- High mobility when changing the work station
- Simple assembly, installation due to plug-in coupling connections·
Particularly compact:
- Low height of only 80 mm
- Minimum dimensions of the lifting table with reference to the Euro-pallet and skeleton container
|
|
Low profile lift tables, due to their low closed height, do not require a floor pit, offering flexibility of location and keeping installation costs to a minimum. It is possible to transport the table easily and in safety by a “mobility kit” from one work station to another providing an even higher flexibility in use.
Two versions are available, either full top platform or “U” shaped, which is particularly useful when loading a pallet safely onto the table using a hand pallet or pedestrian truck without the need for an access ramp.
Capacity from 500 to 2000 kg.
Our tables comply with the European Safety of Machinery standards EN 292, Machinery Directive 98/37/EC and Safety requirements for lift tables EN 1570.
|
|
|
|
|
|
In addition to offering all the safety features of our regular "Guardian" Series lift tables, our low profile models have a lowered height of only 3.25". The low profile feature provides greater flexibility since a variety of applications can be accommodated. And, installation costs are reduced since the need for a floor pit is eliminated.
With capacities ranging from 1,100 pounds to 3,300 pounds, the "Guardian" Series low profile lift tables are available in three versions with either a rectangular, "U" or "E" shaped top for numerous material handling applications.
The "U" shaped low profile table is ideal for handling wire baskets, containers and plastic and wooden pallets that have open bottoms. This design allows loading with either a manual or electric pallet truck without the need for a loading ramp.
The "E" shaped low profile table has all the features as the U-Lift and the other Guardian low profile tables. It is available in a 2,200 lb capacity. The advantage of the E-Lift is the center opening measures 28.9" which is ideal for a standard 27" wide pallet truck. The added center support of the E-Lift is designed to help prevent the pallet from deflecting downward in the center due to the wider center area. The center support is also shorter than the outside legs to allow easier access with the pallet truck. The E-Lift like the U-Lift is designed for use with open bottom pallets, skids, containers or wire baskets.
|
|
LoProfile™ lift tables provide lifting
power from a very low elevation. This low collapsed height provides easy access for pallet jacks, 4 - wheeled carts and other devices requiring low profile. The LoProfile™ is also an excellent choice for conveyor transfer.
|
|
For lifting and positioning of lighter loads, Presto Light-Duty scissor lifts are the answer. They come in a variety of configurations to suit just about any need.
Features:
- Foot operated hydraulic pump provides lift
- Hand controlled release for lowering
- 1/2" steel plate scissor legs
- Lifetime lubricated bearings
- Wide base models
- Oversized & custom platforms available
- Hinged platform allows easy access to cylinders
- Chrome plated ram cylinders
- Custom designs available
|
|
|
|
|
|
HF profile and tube welding units
Easy tubular pipes can also be manufactured by DREISTERN tube welding installations. Its true strong points may however be evidenced by demanding tasks. Should you, for instance, have to produce stainless steel tubes of outstanding quality or contoured tubes with complex cross-sections, then you ought to consult our specialists. Good solutions are seldom exclusively a question of modern plant components.
Laser profile and tube welding installations
For some profile and tube manufactures laser technology is still new territory. In fact, a lot of questions are being asked about this technology. The initial question is frequently: Is laser really the right solution?
More and more frequently our customers answer affirmatively.
TIG profile and tube welding units
An example: With our RSD50 thin-walled tube welding unit, we attain extraordinary diameter/ thickness ratios and excellent seam quality. Even without seam processing, the seam is hardly visible.
Composite tube manufacturing lines
Aluminum-plastic composite tubes are constantly being used in new applications. The reasons are quick installation, corrosion-resistance, and last but not least, lower costs. Hot /cold water pipes and chemical tubes are but a few of the many possible applications. DREISTERN cooperates with the leading extrusion manufacturer MAILLEFER Ecublens (CH) and supplies turn-key machines for very high productivity.
|
|
|
with heavy duty frame, hydraulic clamper, presion guidance for the moving electrode, and falsh speed can be control during flashing, with cam driving system and cylinder upset.
|
|
SQ/AS models are suitable for flash butt welding solid material, pipes, profiles and hollow sections by obtaining high quality joints. They are particularly suitable for mass production with fully automatic controls aiding speed and efficiency.
- Easy-to-use
- Air operated
- Electronic control for the welding parameters adjustment
- Movable jaw by bearings for very precise sliding with low friction to achieve quality welding.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
