|
|
| ... products without technical information |
| |
The 5800 Series Multi-Configuration Multi-Functional Test System offers:
• Combinational test platform.
• Three body styles: floor standing, benchtop or rack mounted.
• 21 slot PXI based backplane.
• 19 slots available for instrument cards.
• Automatic program generation software.
• Up to 3456 analog in-circuit test points.
• Separate user and personality power supplies.
The 5800 Series is designed to meet the ever-changing needs of today's fast evolving PCB manufacturing environment. Building on Aeroflex's long history of producing functional and in-circuit test machines, the 5800 combines both methodologies. The addition of PXI further increases the flexibility of this series of machines by enabling the user to implement solutions using not only Aeroflex PXI cards, but also cards from any PXI manufacturer. |
|
ATE QT2256-320PXI system is designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform.
It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.
It is an In-Circuit Device / cluster tester when High Current Pin Driver options are installed and interfaced to the UUT either through clips / probes or nail bed. Standard configuration is 64 Channels high current Pin Drivers.
It has in-built 20MHz 12bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices.
Integrated Boundary Scan Test controller (Up to 4 Chains) and software package can be used to test today’s PCBs with high density / high pin count devices. Uses latest technology Boundary Scan hardware with RAM based drivers / sensors in synchronization with ATE digital and analog pin drivers.
To effectively test CPU based boards without excluding the CPU from the test, the system offers optional Qmax patented Bus Cycle Signature System. |
|
The functional testers with AC timing that has been dominating the market cost in excess of USD300K upwards. The cost of maintaining such a tester is also exorbitant. Ultimately, this increase the final cost of the product.
Qmax latest innovative product, the "No Foot- print" QT2216 Full Functional mixed signal tester is designed to help the semiconductor companies doing final test be more competitive in the following ways:
1. Much lower cost of test equipment
2. No Foot Print means less space needed on test floors
3. Lower maintenance cost
The advantage of the QT2216 is its adaptability. It can be loaded with different modules to alter its configuration for different tests. It can be configured to test ADC including sigma delta type, DAC, digital, opto, linear, high voltage / current devices etc.
|
|
| IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products |
|
Fault coverage and return on investment, two major factors affecting the choice of a test system in today's competitive markets.
Combine these with the flexibility to adapt as technology advances and you have the blueprint for the most desirable test system on the market.
From board to program - the solution
PinPoint II 14 slot, has been engineered to meet these criteria. It is the fastest, most economical functional test workstation available, giving the best return on investment in the industry whether configured for diagnostics or functional test.
PinPoint II has, in its high specification and modular design, the stride and flexibility to keep one step ahead of the fast evolving electronics market. It is equally well suited to `one-offs' as it is to production quantities and the combination of test technologies within the one powerful environment provides the key to the diverse range of applications the system is suited to. In-circuit functional test of both analog and digital components, edge card functional, VI analysis, boundary scan, PXI test and schematic reverse engineering can all be included in the same test platform. Flexibility extends further into the interfacing of the tester to the unit under test. The PinPoint II has been developed to adapt to the needs of the customer - clips, probes, edge connectors and bed-of-nails fixtures can all be used. |
|
| SIM-Small Instrumentation Modules-is a compact test and measurement platform for a wide range of applications. Unlike other modular systems, SIM offers complete front-panel as well as remote operation, allowing you to choose between manual and computer control. Up to eight instruments share the same mainframe which provides power, clock synchronization, communications, and module status. For additional versatility, you can cascade mainframes or other RS-232 instruments, and even operate modules outside the mainframe. |
|
The GX1110 is a high performance, single-channel PXI arbitrary waveform generator that offers function generator and arbitrary waveform generator functionality within one instrument. Built-in waveforms are available for use with both the DDS or AWG modes of operation and include Sine, Triangle, Ramp, Noise, Gaussian pulse and Sinx/x. A flexible sequencer is also available as part of the AWG's architecture, supporting the generation of complex waveforms.
The GX1200/1201 is a single-channel PXI-based Arbitrary Waveform Generator. The GX1200/1201 is a high performance waveform generator that combines many powerful functions in one small package.
The GX1200/1201 is a single-channel PXI-based Arbitrary Waveform Generator. The GX1200/1201 is a high performance waveform generator that combines many powerful functions in one small package.
The GC1300 is a single-channel PCI-based Arbitrary Waveform Generator. It is a high performance waveform generator that combines many powerful functions in one small package. Supplied free with the instrument is Arbconnection software, which is used for controlling the GC1300 and for generating, editing and downloading waveforms from a remote computer.
|
|
The GP1616H function generator is a programmable instrument capable of generating predefined Sine, Square, Triangle, Ramp, Haversine, Haver triangle and Pulse waveforms as well as a programmable DC output. The firmware is customized to be fully compatible with the Hewlett Packard 8116A GPIB command set. Software test procedures using the original HP8116A instrument require no code modification when upgrading to the GP1616H.
|
|
The GP1550 series features:
- pulse widths from 10nS to 10S
- delays from 0nS to 10S with up to 6-digits resolution.
- Output levels are from -10V to +10V, with pulse amplitudes from 0.5V to 10Vp-p into a 50 Ohm load.
The GP1612H features:
- variable pulse widths from 10 ns to 10 s,
- delays from 0 ns to 10 s with up to 6 digits resolution
- adjustable output levels from -8V to +8V, with pulse amplitudes from .1V to 16Vp-p into 50 ohms load (.2V to 32Vp-p into open circuit).
These Pulse Generators also feature selectable complementary pulse and double pulse, in continuous, triggered, gated and counted burst modes.
They allow selection of predefined amplitude and offset for critical stimulus and testing of major semiconductor technologies as TTL, CMOS and ECL.
|
|
The DDS3-PC is a 12 MHz synthesizer that comes in PC card format and uses direct digital synthesis to produce low-noise sinusoidal signals. The DDS3-PC series produces simultaneous sine and clock signals (ACMOS/TTL) that can be set from 2 Hz to 12 MHz in 2 Hz steps. The DDS3-PCs are fast instruments that allow the frequency to be changed in approximately 1 ms to 10 ms. (Frequency switching time is limited only by ISA bus speed). The user can automatically sweep through a set of frequency, attenuation, and dwell time settings.
|
|
The GTX22x0 family of universal time interval counters provides all the features of stand-alone counters in PXI form factor. There are three versions of the PXI counters, GTX2210, GTX2220 and GTX2230. The GTX2210 support frequency range up to 225MHz, the GTX2220 to 1.3GHz and the GTX2230 covers frequencies up to 2GHz.
The GTX22x0 series counters have two signal input channels via BNC connectors, an external timebase, arm input, and a gate signal output. The separate input signals can be used for Arming and Gating the circuitry, and controlling the timing of the analysis (start/stop duration) for more meaningful measurements.
The GTX22x0 series counters are universal in that they provide many measurement functions of other frequency counters, including frequency, period, and time interval. The GTX22x0 series also have event counting and timing functions over a single channel, such as totalize and ratio between channels.
|
|
| ... products without technical information |
| |
High volume tests of automotive hose assemblies etc. Pressure test, leak test, flow test, volume expansion test, high pressure cleaning and dry blowing in the same cycle.
We have long experience in pressure testing, leak testing and cleanliness. Here the expression “weakest link in the chain” is really valid. When you wash a tube it’s very important that you get the pressure drop in the test object and not in the machine. We have developed a system of sandwich valves, pressure transformers, etc which we need in the system. We are practically the only ones in the market who use servo hydraulics to generate the test pressure. It costs more than pneumatic intensifiers but the advantages are significant.
|
|
The Chatillon® TCD225 Series is an advanced force testing system optimized for production, quality control and engineering applications.
The TCD System consists of a powerful, yet easy-to-use console; a rugged frame with high performance, closed-loop motion control; and an intelligent load sensing system with measuring accuracies better than 0.1% full scale. The TCD console features a high resolution color graphical display featuring menus, function and numeric keys and status indicators that assist the user in setup, operation and analysis. Information may be displayed in large-format tabular and graphical formats for easy viewing.
The frame operates from 0.001 to 50.0-inches per minute (0.01 to 1270 mm/minute) and employs an advanced closed-loop PID controller for precision travel (accuracy better than 0.25% unloaded), ideal for applications such as spring testing where exact distance control is required. The TCD System permits the user to measure heights based on a datum or absolute position. Deflection compensation is standard. Standard test setups for load limits, distance limits, time limits, break tests, rupture tests, cycling and loop tests are included.
No Computers. No Software. No Compromises. |
|
The MicroDock II is the world’s most advanced, compact and affordable automatic calibration, testing and data management system for portable gas detection equipment. Compatible with BW’s GasAlertMicro 5, GasAlertMicro 5 PID, GasAlertMicro, GasAlertMicroClip, GasAlert Extreme and GasAlertClip Extreme family, the MicroDock II is expandable to up to 10 docking modules (including up to 6 charging units).
- Fully automatic “hands-free” calibration & functional bump test
- Automatically verifies performance of audible and visual alarms
- No computer required
- Entirely self-contained
- Fully portable
- Lightweight and mobile
- Operates via line power or a set of four C-cell batteries
- Add additional self-contained docking modules to system via simple, plug-in connections-no external pressure transducers or gas lines necessary
- Simplify record keeping
-Verify proper performance
- Reduce maintenance costs
- Multiple MicroDock II systems can be connected via a LAN
- Multi-language support in English, French, German, Spanish, and Portuguese |
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
| ... products without technical information |
| |
| The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability. |
|
| ... products without technical information |
| |
KRAL Volumeter® for research and production test stands. Laboratory measurement precision is achieved despite fast flow changes and fluid oscillations.
The ideal conditions at the Bureaus of Standards however show the potential of KRAL precision. The screw spindle-metering from the KRAL Volumeter is on one hand very robust and handles the oscillation from pressure waves. On the other hand, the spindles are very quick and can follow fast changes of the flow velocity. Optional pressure pulse compensation is available that detects transient fluid waves.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us. |
|
| Designed to slip easily into the bed of a pick-up truck, Seraphin® Slip-On Volumetric Calibration Unit can speed the job of calibrating multiple fuel dispensing units, while at the same time, enhancing safety. The unit consists of three 5 gallon or 20 liter NIST compliant bottom drain provers individually plumbed to 80 gallon stainless steel transfer tanks. The 80 gallon configuration allows for up to 48 calibration tests before returning to the fuel station's storage tank for dumping. |
|
| ... products without technical information |
| |
| The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability. |
|
|
