|
|
|
|
|
|
100% inline shop floor quality measurement verification.
SMAC unique electric actuator configuration such SMAC XY/XYZ systems give users the capability of 100% parts inspection.
The actuator systems can measure so many features unlike Cameras and Lasers. External & internal dimensions, threads, bores, grooves while checking for burrs at the same time. All this done in machines shop floor environment.
The fully automated solution which was originally conducted by human hand is now used to 100% measure & test inline production of automotive parts such as air bag components and moulded parts which require a total dimension check.
The SMAC Moving Coil Actuator incorporates the unique ‘Softland’ function which enables full programmability to control speed & positional feedback and therefore the ability to find surfaces or positions in space without damaging the component or SMAC actuator
Gauge Correlation: The SMAC actuators are able to be set up in a manner that will allow for them to be easily calibrated & correlated to proven manual or CMM inspection methods. Output of Variable Data: All SMAC controllers allow for output of variable data in a variety of formats that the user can configure in their program. This allows for ease of use when interfacing the SMAC to another system.
|
|
SMAC unique electric actuator configuration such as mini inline XYZ gauging systems gives you the capability of 100% parts inspection (eliminating bad parts) and correction through immediate feedback and adjustment in the manufacturing process. Volumes up to 100 cubic mm can be covered by a single system.
The actuator systems can measure so many features - external & internal dimensions, threads, bores, grooves while checking for burrs at the same time. All this done in normal ie. dirty environments. SMAC measurements can easily be correlated to be manual gauge methods, the "GAUGE CORELLATION."
SMAC offers solutions to the greatest challenges facing auto parts suppliers- 100% perfect parts.
Please contact us for more information.
|
|
|
Camera-based automatic equipment for the control of the whole production, such as springs and other profiles. Up to 3 cameras can be inserted. The system is equipped with a PC based on Windows XP and on the EASYDUR software for image analysis. The operator can program it as needed, being the software very open, flexible and intuitive. All the results are stored, thus allowing to obtain statistics and to print customizable certificates in Excel format.
|
|
The URM-K measuring instrument is a very flexible device to inspect profiled components, such as profiled shafts. The traditional place for the unit to be used is on the shop floor directly next to the production machine. This location is ideal for quick and reliable sampling inspections.
Some criteria and applications of the URM-K:
* Quick and precise determination of gearing features such as dimension, concentricity, roundness, individual and cumulative pitch deviation, helix angle.
* Diameter inspection for size, concentricity and roundness.
* Determination of locational deviations by referencing the gearing, diameters and surfaces.
* Highest precision by means of substitution method (calibration on setting masters).
* Flexible and versatile for use with all types of different workpieces.
* Link between production and inspection room.
* Very robust design, to be used on shop floor directly next to the machine tool.
|
|
Advantages:
- Quality control of rough castings and machined crankshafts
- Manual loading and unloading
- Digital measured data processing
- Expandable with a correction unit
>>>>>>You may find 13 more different products for measuring and balancing of crankshafts in our product guide on our homepage.<<<<<<
|
|
CL-2400 - Non-Contact Thickness Meter
The CL-2400 is designed for measurements on conductors, such as aluminum discs, and semiconductors, such as silicon wafers. Thickness is measured as the material under measurement passes through the gap formed between two opposing gap sensors. The CL-2400 can be used for static or running thickness measurements. BCD output, RS-232C interface, and remote control inputs are provided for external control, analysis, and measurement automation.
- Easy to read, large digital display.
|
|
| ... products without technical information |
| |
|
|
|
|
Hydraulic pressure testing system that monitors and diagnoses fluid systems in a snap. Snap-Check enables machinery manufacturers to test system pressure quickly, easily, and leak-free. In the case of larger equipment, Snap-Check enables system pressure to be checked both after it is assembled at the factory and following reassembly at customer locations. The low-profile system identifies operating pressure and surges, without the need for a permanently installed gauge or transducer.
Requiring only one hand for connection and disconnection, CEJN Series 358 couplings and nipples make up the most user-friendly pressure testing system available. The Snap-Check system offers:
- Working pressures up to 60 MPa
- Smooth operation in temperatures from -40° F to +212° F
- Standard red plastic dust caps or optional metal screw-on caps that keep the system clean and free from grit and dirt when not in use
- Variety of thread configurations, including NPT, BSP, BSPT, metric, and SAE
- Long-lasting, reliable, test-port fittings and couplings for numerous applications, such as mobile hydraulic off-road equipment
Snap-Check liquid-filled pressures gauges are available in a wide variety of sizes and pressure ranges.
|
|
Resato offers a unique combination of in-house engineering and production of both components and systems. We are proud to present our extensive product range. This overview gives a good impression of our scope of delivery of our standard systems. If you wish to receive more detailed information on one or more of our products, please feel free to contact us. Our sales department would be pleased to be of your assistance and is ready to answer any questions concerning our products.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
Is the welding seam closed and can it withstand the requested peeling, tensile and shearing forces? EXAMO performs right on the construction site – quick, reliable and uncomplicated.
• Designed for construction site conditions
• Handy, robust and light
• Digital display of elongation, peak force, tear force,
test speed and position
• With optional data recording on a memory card
• Optional for geotextiles
|
|
IEDScout is a universal client to IEC 61850 servers - such as substation IEDs - and a publisher/subscriber for GOOSE messages. It provides numerous useful functions needed in the substation or the laboratory.
As an IEC 61850 client it supports many functions, from generic reading/writing of data attributes to using the self description of the IED and producing SCL files from it. It detects GOOSE messages on the network and monitors them. The IEDScout also simulates GOOSE messages. With IEDScout, the protection engineer has new options to enhance the depth and quality of testing.
Applications
- Testing
- Troubleshooting
- Commissioning
- IED Development
Download a free evaluation version on www.omicron.at
|
|
|
Designed to slip easily into the bed of a pick-up truck, Seraphin® Slip-On Volumetric Calibration Unit can speed the job of calibrating multiple fuel dispensing units, while at the same time, enhancing safety. The unit consists of three 5 gallon or 20 liter NIST compliant bottom drain provers individually plumbed to 80 gallon stainless steel transfer tanks. The 80 gallon configuration allows for up to 48 calibration tests before returning to the fuel station's storage tank for dumping.
|
|
Prover
For all flow meters and volume meters
Inspection cycles
Master meter test equipment
Calibrated vessels
Stationary and mobile versions
Equipment for calibration and inspection authorities
Skid-mounted units for field service operation
Automatic sequencing and report generation
|
|
|
|
see the results for the following category : 
