|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
|
High quality 3 pole 12mm ferrite motor with a spur gear open gearbox, steel geartrain and sintered bronze bearings. The double shaft unit features an ungeared extended shaft protruding from the motor case. This is suitable for mounting encoders or other drive components for feedback control or actuation. Used by modellers for animating static displays, robotics enthusiasts, and industrial actuators (e.g. locking mechanisms). Originally designed for focusing rings on professional video cameras.
|
|
|
High precision planetary (epicyclic) gearbox coupled to a 3 pole 12mm ferrite motor. The unit features a lightweight injection-moulded gearbox assembly and is manufactured to an extremely high quality. The unit was developed for generating the accurate motion required in miniature desktop printers. The planetary geared motor has a unique cross-shaped output shaft which is ideal for zero slip transmission.
|
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
Three-phase geared motors
Popular geared motors with constant speed and high functionality; power range 0.06 to 45 kW; output torques of up to 9,000 Nm
Detailed information
Geared motors - inverter variable speed drives
Popular industrial geared motors combined with electrical adjustment via 8200 motec frequency inverter; power range 0.25 to 7.5 kW; the distributed drive solution
Detailed information
Geared motors - electronic starter
Popular industrial geared motors combined with the electronic starter starttec; power range 0.25 to 4.0 kW; the distributed drive solution
Detailed information
Geared servo motors
Highly dynamic geared servo motors with synchronous and asynchronous servo motors; max. torque: 7 - 9,000 Nm; low backlash
Detailed information
Gearboxes - with shaft or flange input
Speed reduction gearboxes with free shaft or IEC flange at the input side suitable for motors to IEC 72; output torques of up to 9,000 Nm; finely stepped output speeds
Detailed information
Geared motors - mechanical belt adjustment
Popular industrial geared motors combined with mechanical adjustment via Simplabelt compact units; power range 0.25 to 45.0 kW; adjustment range 1:6
Detailed information
Geared motors - mechanical adjustment Disco
Popular industrial geared motors combined with mechanical adjustment via Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Disco variable speed drives
Mechanical adjustment with Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Standard three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
|
|
|
Technical Description. Motor casing: rolled, corrossion protected Excitation field: Permanentmagnet. Method of bearing, A-side: Sleeve bearing. Method of bearing, B-side: Sleeve bearing. Gear: Spur gear. Gear housing: plastic. Gear wheel: plastic. Gear greasing: lubricant/permanent lubrication. Mechanic interface: Output shaft. Electric interface: Connector or leads with connector.
|
|
Power and reliability, the features that make this model ideal for large-sized gate leaves, such as industrial, sliding gates. The new generation electronics allows you to program the command to partially open the gate, control the proper running of the safety devices and automatically block the commands when any obstacles are detected.
|
|
Features:
- Single or three phase asynchronous motor
- Permanently lubricated
- Thermal cut-out
- 2 directions of rotation
- Class B insulation
- IP44 protection
- Temperature working range: -20°C to +85°C
- Relative humidity < 95%
Options:
- Output shaft according to specifications
- Inrush current or lack of current brake
- 2 mountings available (foot or face)
- Special voltages and frequencies
- Class F insulation
- IP55 protection
|
|
Known industry wide for their rugged construction and reliability, Gast Air Motors and air powered Gearmotors are available in both lubricated and oilless models.
These air motors and gearmotors are used in many industrial applications, from mixing equipment to running pump drives.
• Self-sealing vanes take up their own wear, ensuring consistent output for thousands of hours of use
• Variable speed capabilities allow flexibility and versatility in any number of applications
• Cool-running operation means air motors can be used in ambient temperatures of up to 250° F (120° C)
• Non-electrical operation reduces the possibility of explosion from igniting flammable gases
• ATEX (II 2 GDc T4) compliance as standard on catalogue listed Air Motors. (Available only on European spec. Geared Air Motors upon request.)
|
|
|
The standard GLOBE PFG-red air motors range up to 2.1 kW. Gear ratios from 3:1 to 1000:1. The series are suitable for light to medium industrial applications. Mounting type is They are small in size, low in weight, maintenance-free and suitable for oil-free operation.
|
|
|
ATEX certificated geared vane air motors range from 0,1 to 9,5 kW. They are available with a wide range of reductors. They have a high starting torque, high efficiency and a long lifetime and can be supplied with valves and brakes.
|
|
Globe Archimedes pneumatic motors 2M and 5M are installation sliding-vane motors with integrated planetary gear in the capacity range of 0,25 -1.0 KW small diameters and axial air connections permit the installation also with restrained spatial conditions.
The technical advantages of this engine series are:
Alternatively flanged connection or screwing in attachment M33x1 (2M)/M48x1,5 (5M)
Stop under load permissible engine cannot be overloaded
ATEX II-2-GDc-T5
Outstanding of weight per horsepower (kW/kg)
Approach without overload - large speed range
alternatively or two directions of rotation
stainless remarks are available
Snaps direction of rotation reversal permissible
|
|
|
No other selection tool comes close to the LEROY-SOMER configurator, because it can select motors and geared motors, with or without brake and integrated drives and enables the importation of DXF files directly into a CAD system. It contains the equivalent of 164 technical paper catalogues in 7 languages and offers millions of combinations of possible products.
|
|
|
This CD contains all the necessary programs to make your job of specifying the correct motion control components easy! Whether your task is sizing rotary and linear motors, or choosing compatible amplifiers, or ensuring compatibility with your motor and cable sets.
|
|
On-line configurator Tetraservice
To generate an inquiry or a documentation in just a few seconds.
A valuable tool to rapidly select the products which is most suitable for the required application and to obtain real-time documentation.
The intuitional and error-proof interface guides even inexperienced users to the correct selection and the user obtains also the preview of the configurated product and 3D / 2D CAD models, in the most utilized formats, ready to download.
|
|
|
|
see the results for the following category
