|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
| High quality 3 pole 12mm ferrite motor with a spur gear open gearbox, steel geartrain and sintered bronze bearings. The double shaft unit features an ungeared extended shaft protruding from the motor case. This is suitable for mounting encoders or other drive components for feedback control or actuation. Used by modellers for animating static displays, robotics enthusiasts, and industrial actuators (e.g. locking mechanisms). Originally designed for focusing rings on professional video cameras. |
|
| High precision planetary (epicyclic) gearbox coupled to a 3 pole 12mm ferrite motor. The unit features a lightweight injection-moulded gearbox assembly and is manufactured to an extremely high quality. The unit was developed for generating the accurate motion required in miniature desktop printers. The planetary geared motor has a unique cross-shaped output shaft which is ideal for zero slip transmission. |
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
Three-phase geared motors
Popular geared motors with constant speed and high functionality; power range 0.06 to 45 kW; output torques of up to 9,000 Nm
Detailed information
Geared motors - inverter variable speed drives
Popular industrial geared motors combined with electrical adjustment via 8200 motec frequency inverter; power range 0.25 to 7.5 kW; the distributed drive solution
Detailed information
Geared motors - electronic starter
Popular industrial geared motors combined with the electronic starter starttec; power range 0.25 to 4.0 kW; the distributed drive solution
Detailed information
Geared servo motors
Highly dynamic geared servo motors with synchronous and asynchronous servo motors; max. torque: 7 - 9,000 Nm; low backlash
Detailed information
Gearboxes - with shaft or flange input
Speed reduction gearboxes with free shaft or IEC flange at the input side suitable for motors to IEC 72; output torques of up to 9,000 Nm; finely stepped output speeds
Detailed information
Geared motors - mechanical belt adjustment
Popular industrial geared motors combined with mechanical adjustment via Simplabelt compact units; power range 0.25 to 45.0 kW; adjustment range 1:6
Detailed information
Geared motors - mechanical adjustment Disco
Popular industrial geared motors combined with mechanical adjustment via Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Disco variable speed drives
Mechanical adjustment with Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Standard three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
|
|
The Scimitar range has been built to meet stringent requirements and is corrosion resistant for durable outdoor and indoor use.
The switches are contained within a common stainless steel SF6 filled tank with the fuses mounted in air above the gas chamber. Each fuse is sealed against external influences and locked into its own chamber upon insertion. The units can be extensible for direct connection to form multiple plan switchboards without the need to access the gas chambers or for extra cabling.
Features
Ratings up to 15.5kV
Common switching chamber with sealed SF6 environment
Low gas operating pressure
Fully extensible
Indoor and outdoor
Freestanding, transformer mounted or transformer connected |
|
| ... products without technical information |
| |
Power and reliability, the features that make this model ideal for large-sized gate leaves, such as industrial, sliding gates. The new generation electronics allows you to program the command to partially open the gate, control the proper running of the safety devices and automatically block the commands when any obstacles are detected.
|
|
| ... products without technical information |
| |
No better, easier and neater installation than with a shaft mounted unit of the F series. Lightweight and performing, an F unit is the dependable drive for all the material handling applications.
|
|
• Output torque: from 80 to 600 Ncm
• Ratios: from 20/3 to 18,000,000
• Revolution time: from 1s to 800h
• Frictions: unidirectional, bidirectional |
|
saia gearboxes
We offer a wide range of small synchronous and stepper motors, also available in combination with different gearboxes and overload clutches. Electronic driver circuits complete our range.
-Several gearbox sizes for a variety of torque loads
-Gear ratios from 4:1 to > million
-Available for combination with all motors
|
|
Precision Gearheads
Extremely light and compact from Ø6 mm to Ø 44 mm
High torque
All steel construction available
Available in a wide variety of reduction ratios
Smooth and quiet performance
Custom systems available from design to production
Vaccuum and extreme temperature versions available
Long operational lifetime
Spur Gearheads
Extremely light and compact from Ø8 mm to Ø 38 mm
Available in a wide variety of reduction ratios
Smooth and quiet performance
Custom systems available from design to production
Vaccuum and extreme temperature versions available
Long operational lifetime
Low additional system friction
Zero Backlash gearheads available
Hybrid Gearheads
Extremely light and compact from Ø15 mm to Ø 22 mm
Available in a wide variety of reduction ratios
Combines smooth performance of a spur gearhead with the high
torque output of a planetary gearhead
Smooth and quiet performance
Custom systems available from design to production
Vaccuum and extreme temperature versions available
Long operational lifetime
Low additional system friction
|
|
Customized special gears
Standard spur and planetary gearheads
- Ø 6 - 81 mm
- 0.002 - 120 Nm
Characteristics
- Matched to maxon motors
- Efficient transmission of torque and speed
- Reduction ratios from 4:1 to 5752:1
- High precision
- Low noise level
- Comprising high-tech CIM/MIM components
- Autoclavable versions available |
|
| Viking in-line gear reducers offer reduction ratios from 2.6:1 to 35.1:1, with the ability to handle loads up to 260 kW. Solid input shaft or close-coupled input side adapters for IEC or NEMA motors offer mounting versatility. A second series of offset gear reducers, with ratios from 2.24:1 to 7.95:1, allows rotation of the input shaft to match motor height for easy mounting, while maintaining output shaft height. They are capable of loads to 30 kW. |
|
| The Sumitomo Helical Shaft Mount (HSM) Speed Reducer provides a convenient installation and removal method for speed reduction by mounting directly on the drive shaft. Sumitomo's Taper-Grip® bushing design provides simple keyless mounting and easy removal. HSM is readily adaptable for CEMA screw conveyer and shaft mount options. The HSM features carburized gear teeth with optimal gear geometry and wide gear faces, allowing maximum loading and highest efficiency torque output, for higher rating capacity in the most compact design. |
|
High versatility
- 5 sizes that offer a wide range of possible mounting positions.
- Gearboxes provides with trains of gears at 2 or 3 stages of reduction.
High performances
- Power from 0.75 kW to 83 kW.
- Max torque 4015 Nm.
- Ratios up to 118/1.
High reliability
- Strengthened casing for heavy duty applications.
- High resistant gears made in top quality steel.
- Largely proportioned bearings. |
|
PLEASE USE ENGLISH FOR ALL ENQUIRIES.
Enquiries written in other languages will not be answered. |
|
Fields of application for these gear reducers are rolling mills, profiling plants, crushers, double-shaft mixers, kneaders, compactors and presses. Applications of this type require two contra-rotating drives, such as provided by the POSIRED TS gear. The various designs, installation possibilities and optional accessories from the basic range of POSIRED 2 can also be used for the double shaft gear POSIRED TS.
Technical Data:
Torque (T2 nominal):1,000 up to 110,000 Nm
Transmission Ratio: 5 up to 140 iN
Centre distance (a): 122 up to 656 mm
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
