|
|
Data Flute is excited to launch the next evolution of our performance proven SS series, the SSDH series. We achieve superior chip flow and evacuation through the introduction of chip-release flute form technology, and a unique inter-flute helical transition all within a patent pending design. A premium, rupture resistant substrate is the foundation to which these progressive geometries are applied. The end result is a brute of an end mill, capable of ultra-aggressive metal removal rates in ferrous material ranging from low carbon steel to high nickel alloys. This all adds up to cycle time reductions and improved machine tool productivity.
Benefits include:
- Design that virtually eliminates flute packing and obstruction
- No chatter
- Freer cutting that demands less horsepower
- Stability in aggressive applications
|
|
HTT offers a complete range of end mills specifically designed for Titanium and Inconel
a) Roughing Cutters in ASP52 OR ASP60 (Powdermetallurgy)
b) Finishing Cutters in Micrograin Solid Carbide
The coatings offered on this type of cutters is of Nanocomposite style coating.
The range of diameters stretches from 1 mm to 32 mm
Requests for special execution are anytime very welcome.
|
|
FRANKEN Micro-Line end mills
The Micro end mills are available as end mills, ball-nose and torus end mills in solid carbide K5-20FH, un-coated and TiAlN-coated. The diameter range is 0,2 - 2 mm for the end mills and ball-nose end mills, and 0,5 - 2 mm for the torus end mills. The Micro-Line end mills are available in three lengths, short (2.2 x d), long (5 x d) and extra long (10 x d).
|
|
|
DIXI Polytool has a standard range of PCD end mills, ball nose end mills as well as wheel dressers
|
|
Diameter range from 1.00” – 4.00”
4 indexes without going to a left hand cutter.
Backdrafted relief angle for reduced side pressure in long reach applications.
Utilizes the same inserts as the QuadBore and PowerQuad milling line
End mills equipped with the TopOn adaption for reach flexibility.
All tools equipped with coolant through.
|
|
|
Onsrud is offering a new line of top loading cutters to be used on manual or CNC top loading engraving machines. The solid carbide cutters are made of premium micro grain carbide and use our proven cutting geometry to produce fast, clean cuts in plastic and aluminum materials. These tools will allow you to rout and engrave on a single machine. The tools will be offered with a variety of cutting diameters. Custom sizes can be made on request.
|
|
|
Routers for Fiberglass and Non-Metallic Materials in Fractional and Metric...Quality selection of Wood Routers
|
|
|
|
|
|
The Seco Tools Turbo Square Shoulder Milling range is the industry's most comprehensive and versatile solution to all square shoulder milling requirements.
From a 5mm depth of cut with the Nano Turbo, the Micro and Super Turbo up to the Power Turbo at 17mm, Seco Tools has a square shoulder solution for every operation in every material.
The Square Shoulder milling inserts:
NANO TURBO
The Nano Turbo may be the smallest of the Turbo family, as well as the smallest in the industry, but it delivers big on performance.
MICRO TURBO
Helical Micro Turbo utilizes the advanced cutter and insert geometries of the Seco Tools Turbo system to deliver high efficiency, low power, low noise performance in a broad range of materials and operations.
SUPER TURBO
Without a doubt, the Super Turbo is the number one choice for general purpose square shoulder milling applications.
POWER TURBO
Power Turbo puts the "heavy" in heavy duty; providing maximum metal removal with free cutting inserts to make efficient use of machine power, even in demanding applications and difficult materials.
MINI SQUARE
R220.99 is a member of the square shoulder family. It is a universal cutter for slotting, contouring and face milling operations in ordinary steel (up to about 300HB) easier stainless steels and cast iron.
MIDI SQUARE
R220.99 is a member of the square shoulder family. It is a universal cutter for slotting, contouring and face milling operations in ordinary steel (up to about 300HB) easier stainless steels and cast iron.
MAXI SQUARE
R220.99 is member of the square shoulder family. It is a universal cutter for slotting, contouring and face milling operations in ordinary steel (up to about 300HB) easier stainless steels and cast iron.
SLOT MILLING
Our Slot milling product is offered in a diameter range 12 - 50 mm and fixed and coarse pitch version.
217/220.69-16
The product is offered in the diameter range 25 - 200 mm and fixed pockets, normal and closed pitch version.
220.69-15H
Our product is offered in the diameter range 50 - 125 mm and fixed pockets and coarse pitch version.
R220.90
Seco Tools' R220.90 is a square shoulder mill for heavy duty operations and large depth of cuts. Application areas are harder steels, stainless steels and cast iron.
|
|
V590 Single Station and V595 Long Edge
Engineered for your most demanding applications.
Cutters
- Cutters are designed to generate a 90º square shoulder, minimizing secondary operations
- Large chip gullets ensure efficient chip evacuation
- V590 Series offers through-the-tool coolant
Inserts
- Positive top-form geometry inserts create lower cutting forces at higher feed rates
- Inserts are interchangeable between the V590 & V595 Series
- Insert design makes these cutters ideal for ramping and helical interpolation
Specifications
- Geometry: Positive/Positive
- Applications: Roughing, channel milling, ramping, helical interpolation, plunging
- Cutter Diameters:
V590 = .375" - 6.00"
V595 = 1.00" - 2.00"
- Workpiece Materials: Steel, stainless steel, cast irons, high-temp alloys, aluminum and non-ferrous
|
|
|
Stellram's thread mills complete a thread in one machine set up. Tools with NPT, NPTF, BSPT, BSW thread forms produce internal, external, right hand and left hand threads with the same tools. They produce easy to handle chips, minimize power requirements and interrupted cuts and casting mis-match is no problem. Excellent surface finish eliminates deburring operations. Multi-start threads are easy to produce and there are no broken taps to remove.
|
|
|
The standard threading programme of DIXI Polytool comprises complete ranges of thread mills (ISO, UN, BSP, BSPT, NPT, NPTF norms), whirling tools as well as micro taps.
|
|
FRANKEN has been at work developing milling cutters ever since its foundation. You can imagine how wide our variety of carbide and HSS tools must be nowadays. Our production range includes the following main product groups:
* End mills and slot drills
* Die-sinking cutters
* Shell end mills
* Gear cutters
* Solid carbide milling cutters
* Milling cutters with indexable inserts designed especially for the die and mould industry
* Reamers and countersinks
* Clamping tools for milling cutters
With its rich variety of tool types and cutting materials, its high quality standard and its uncompromising precision, the FRANKEN product range and especially the TOPLINE Programme occupy an unrivalled top position.
If you want to find out which of our tools is the most economically efficient for your work case, please look into our sales literature or into our Electronic Catalogue Tool Finder, or contact our specialists from the Technical Service Dept.
|
|
Thread Milling
Kennametals indexable thread milling system allows for threading to a shoulder and unparalleled size control compared to conventional tapping.
The low torque and horsepower requirements mean you can effectively produce large threads on lower-power machines.
TMS Thread Milling System ISO metric
Double-sided inserts for perfect productivity
|
|
Thread Milling Cutters, Cutters with brazed carbide tips
- Thread Milling Cutters
- Thread Milling Cutters with Counterbore
- Combined Drilling and Thread Milling Cutters
- Shell End Mills
- Side Milling Cutters
- Slotting End Mills, 2 Flutes
- End Mills, short
|
|
|
|
|
|
The design of our indexable thread mill cutters and inserts represent another step forward for thread making applications.
Easy to load inserts are double-sided and 40 mm long for increased thread lengths.
In some cases, the same insert can be used for both left and right hand threads of the same pitch. The complete range is available in Seco Tools' tough and wear resistant grade F30M, a universal choice for all materials.
Seco Tools have engineered a range of tool holders with multi-tooth cutter bodies for O.D. and I.D. thread making operations. Shell mill versions are also available and hold up to six inserts which allows for more aggressive threading. Unlike tapping, milled threads can be machined to full depth, even in materials that have already been hardened, with no sacrifice to the thread form, surface finish or accuracy.
Seco Tools Threadmaster™ Mills
Seco Tools Threadmaster Mills thread holes as small as 4 mm in diameter while providing improved thread quality, productivity and lower cost per hole when compared to conventional tapping. These 2xD thread mills machine up to 100% depth and feature a high helix angle for reduced cutting forces which reduces the risk of challenges when performing a final threading operation on potentially expensive components. The thread mills are also engineered to be very rigid and vibration resistant permitting higher feed rates and promoting longer tool life.
The TiCN coating provides both toughness and wear resistance for machining of all ISO materials and high-temperature alloys through coolant holes on thread mills of 8mm shank diameter. This promotes larger chip evacuation, tool life and surface finish.
Multi Tooth Thread Milling Cutters
Multi tooth thread milling cutters are available in diameters 17-36mm, the maximum is 80mm. There are an extensive range of inserts available in pitches 1,0-6,0 mm (24-4 TPI) in most common profiles which gives the possibility to increase the feed rate and to reduce the machining time.
|
|
Vargus MiTM - The FASTest Indexable Thread Milling Tool!
Vardex MITM Thread Milling Cutters with indexable inserts
The NEW MITM thread mill is designed to reduce cycle time when generating large threads by using long inserts in a multiple-flute holder. MiTM allows significant increases
in feed rates and reduced the number of machining passes. MiTM threading tools make use of two cutting edges per insert, which considerably extends tool life.
|
|
|
|
|
|
MultiVario - the upper class concerning chip production
The MultiVario-Cutter is the result of the progress made before concerning HW (HM) and HS (HSS) milling tools. The aim of the development was, above all in the field of the chip production of XPS material (extruded Polystyrol), to design a milling tool that is able to achieve moreover best surface qualities under high production conditions.
It appeared rather directly that in depend-ence of the diameter generally not more than 24 knife-edges could be arranged on account of the to some extent existing complicated tongue and groove forms.
Besides the cutting material did set a limit to the further development of the shaping of
the cutting edges so that it certainly succeeded in improvements but still having been not quite sufficient to declare it a pioneer development.
This is why we applied new methods and developed a milling tool with respect to quality and versatility that can be made suitable for your material to being pro-cessed. You won%u2019t find a second one of this construction!
Perfect surface quality of economical highest standard - this is the characteristic line in favour of which you may decide the acquisition of the MultiVario-Cutter.
The result shows a clearly increased profit with regard to:
- operating safety
-handling and control of the tool
- efficiency by higher chip production
and unparalleled product quality
|
|
DIA-Tools for the Highest Precision
By working requirements and construction possiblilities, DIA-tools are made in the bonded form (e.g. cutters, saw-blades, drill and surface cutters or with substitute cutting edges e.g. cutting heads or cutting tools).
Also all known tool forms can be produced with polycrystalline diamond cutters. The cutting geometry of the DIA-tools (e.g. hook, cutting angle and back angle) are specially made to suit the materials to be cut.
|
|
PCD:
For working with aluminium with a high silicon content, non-ferrous metals, CFK and GFK materials as well as compound materials like glare.
CBN:
For working with carbon rich and hardened steels.
We produce optimal milling tools, complete and according to your requirements. Together we determine your tool requirements and produce them exactly according to specifiations. The milling, production and material is determined by your working requirements. We balance and shrink fit your milling tools on request.
|
|
in ultra-hard materials
Face milling cutter PF 1000
Cermet and ceramic tools
PCD- and PCB-tipped tools
|
|
For grooving and slitting in steels, cast iron, non-ferrous metals and plastics
Applications:
Cobalt shell end mills (peripheral cutting)
Cobalt angle and double angle cutters (Milling guides and dove tails in steels)
Cobalt orner roughing cutters (cutting edge radii)
Cobalt convex radius cutters (cutting half-round)
|
|
PCD:
For working with aluminium with a high silicon content, non-ferrous metals, CFK and GFK materials as well as compound materials like glare.
CBN:
For working with carbon rich and hardened steels.
We produce optimal milling tools, complete and according to your requirements. Together we determine your tool requirements and produce them exactly according to specifiations. The milling, production and material is determined by your working requirements. We balance and shrink fit your milling tools on request.
|
|
Cutting tools
End mills with straight shank carbide
2 flute end mills 2D QC SN
Commercial name : 2 Flute end mills
Specification : 2D QC SN
Diameter : 4
Type : Carbide
Knuckle : YES
Cutting tools
End mills with straight shank carbide
2 flute end mills 2D QC SN ALU
Commercial name : 2 Flute end mills
Specification : 2D QC SN ALU
Diameter : 4
Type : Carbide
Knuckle : YES
|
|
Cutting tools
End mills with straight shank HSS
2 flute end mills 2D QC SC
Commercial name : 2 Flute end mills
Specification : 2D-QC-SC
Grade : COBA 8 TIAIN
Diameter : HSS
: 1
End mills with straight shank HSS
1 flute end mills 1D QC SN
Commercial name : 1 flute end mills
Specification : 1D-QC-SN
Type : 3
Grade : COBA 5
Knuckle : HSS
Diameter : NO
|
|
Side and face milling cutters
Execution H
- Staggered teeth for hard and tough materials
Staggered tooth slitting saws, with coarse toothen spiral
- Milling cutters
|
|
|
|
