|
|
|
|
|
|
Patented sealing of all machine elements, therefore also ideally suitable for machining of graphite and other dust-creating abrasive materials without retooling, additional extraction equipment and other forms of restrictions.
Temperature stabilisation of the complete machine frame for highly accurate production, water-cooling of bearings and spindle nuts as well as the milling spindle by means of an extra cooling sleeve.
Integrated chip conveyance - simple disposal
Accessibility of the work area is particularly easy from 2 sides and visibility is excellent
Environmentally-friendly spray cooling - no disposal necessary
Part loading with crane possible, front door opens roof
Automatic loading of pallets and / or tools is possible with a robot by means of a door at the front
Tool changer - dust protected and with integrated laser measuring equipment
Laser measuring equipment for length and diameter measuring as well as checking and profile determination of the milling tool in use.
Digital drives with Sercos interface
2 encoder systems, with high resolution in each axis for greatest accuracy and dynamic response.
Control technology, matched to the mechanical system of the machine, for movement completely free of contour variations
Machining precision depends on the application
Workpiece probing with Infrared 3D probe for fast setting up
|
|
MCV300
Travel
X-Axis 610 mm(24")
Y-Axis 305 mm(12")
Z-Axis 460 mm(18.1")
Spindle nose to table 70 - 530 mm(2.8-20.9")
Table
Table size 700 mm X 308 mm(27.6-12.1")
Floor to table 835 mm(32.9")
Max. table loading capacity 350 kgs()770Lbs
T-slot (no x Width x Pitch) 4 X 16 X 63.5 mm ( 4 X 0.6 X 2.5 inch )
Spindle center to column 415 mm(16.3")
Feed system
Rapid traverse speed X/Y: 20 M/min ( 787.4"/min) , Z:18 M/min (708.7"/min)
Feed motor(FANUC) X/Y: 1.2kW (8Nm) , Z: 1.8kW (12Nm)
Ball screw diameter & pitch 32 mm / 10mm (1.3" / 0.4")
Cutting feedrate 1-10,000 mm/min (0.04 - 393.7")
Type of transmission X/Y/Z%uFF1ADirect mounting
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A
Max. spindle speed 8,000 rpm / 10,000 rpm (Op)
Spindle motor 5.5 / 7.5 kW / 7.5 / 11 kW (Op)
Type of transmission Belt
|
|
MCV1300
Travel
X-Axis 1,300 mm (51.2")
Y-Axis 760 mm (29.9")
Z-Axis 680 mm (26.8")
Spindle nose to table 195 ~ 875 mm (7.7 ~ 34.45") 145 ~ 825 mm (5.7 ~ 32.48
Table
Table size 1,420 mm X 700 mm (55.9X27.6")
Floor to table 920 mm (36.2")
Max. table loading capacity 2,200 kgs (4840Lbs)
T-slot (number x width x pitch) 5 X 22mm X 125mm (5 X 0.86" X 4.9")
Spindle center to column 760 mm (29.9")
Feed system
Rapid traverse speed X / Y: 20 M / min ( 787.4" / min ), Z: 18 M / min ( 708.7" / min )
Feed motor (FANUC) X / Y / Z: 4.0 kW (22 Nm)
Ball screw diameter & pitch X / Y / Z: 50 mm / 10 mm ( 2 / 0.4" )
Cutting feed rate 1~10,000 mm/min(0.04 ~ 393.7"/min)
Type of transmission X/Y: Direct Drive , Z: Belt
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A
Max. spindle speed 8,000 / 10,000 rpm (Op)
Spindle motor 11/15 kW / 15/18.5kW (Op)
ype of transmission Belt
|
|
MCV 2000
Spindle
Type of tool shank ISO40 (BT / CAT / DIN 69871A)
Max. spindle speed 8,000 rpm / 10,000 rpm (Op)
Spindle motor 7.5/11 kW / 11/15kW (Op)
Type of transmission Belt
Table
Table size 1,050 X 600 mm ( 41.3 X 23.6 " )
Floor to table 855 mm(33.6")
Max. table loading capacity 1,000 kgs(2,200Lbs)
T-slot (number x width x pitch) 6 X 18 mm X 100 mm (6 X 0.7" X 3.9")
Spindle center to column 652 mm (25.6")
Travel
X-Axis 850 mm (33.5")
Y-Axis 600 mm (23.6")
Z-Axis 560 mm (22.0")
Spindle nose to table 100 ~ 660 mm (3.9 ~ 25.9")
Feed system
Rapid traverse speed X/Y: 20 M/min(787.4"/min) , Z:15 M/min(590.6/min)
Feed motor (FANUC) X: 1.8kW (12 Nm) , Y: 3.0kW (22 Nm) , Z:4.2kW (30 Nm)
Ball screw diameter & pitch X : 40mm, Y/Z :45mm / 10mm(0.39")
Cutting feed rate 1~10,000 mm/min(0.04 ~ 393.7"/min)
Type of transmission Direct Drive
|
|
Description of standard accessories:
Full Length Enclosure VMC-84, VMC-115
Splash Table Guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8
Remote Manual Pulse Generator (M.P.G.)
Oil & Coolant Separator
Automatic Lubrication System
Taper Air Through Spindle
Collant Unit
Spindle Chiller
Work Lamp
Air Blast
Heat Exchanger
Tool Box with Leveling Bolts & Pads
One set of AGMA Operational Manual
One set of Control Operational Manual
|
|
|
The new Diana family of milling machines has been developed to suit those manufacturing sectors where enhanced 3-D surface finish in addition to rigidity and versatility is compulsory. Also the choice of several accessories available to this machine make it most suitable for multiple jobs.
|
|
Travel
- X-axis travel (Longitudinal movement of table): 1500mm
- Y-axis travel (Vertical movement of spindle head): 1200mm
- Z-axis travel (Cross movement of Column): 1100mm
Table
- Table working surface: 1000x1000mm
- Table loading capacity: 5000kg
Spindle
- The highest revolving speed: 10000min-1 [15000min-1, 18000min-1]
- Spindle taper hole: 7/24 taper,No.50(BT50)
Automatic tool changer
- Tool storage capacity: 60 tools[90-450]
APC/PLS
- The number of palettes: 2nd page / [5th page ]
NC equipment: FANUC 31i-MODEL A5
|
|
|
The Biesse machining centres in the Rover B series are designed to be used to process panels and solid wood elements. Technologically innovative solutions, working units that can be extensively adjusted and extremely solid manufacturing characteristics all ensure high quality finish and great reliability under any type of working condition.
|
|
Vertical Machining Centers V.Plus / R.Plus Series
V.Plus-550
Travel:X/Y/Z mm (in.) 550 / 410 / 460 (21.65 / 16.14 / 18.11)
Working Surface mm (in.) 860 x 400 (33.85 x 15.74)
Loading Capacity kg (lb.) 400 (880)
Rapid Traverse:X/Y/Z m/min (ipm) 36 / 36 / 30 (1,417.3 / 1,181.1 / 1,181.1)
R.Plus-550
Offering twin pallets for enhanced productivity on the V.Plus-550 .
R.Plus-800
Offering twin pallets for enhanced productivity on the V.Plus-800 .
|
|
The System 3 centers are two-place centers (two separate work spaces for parallel loading and unloading) with one or two (TWIN) working spindles.
Designed as TWIN center for highly productive serial productions - high-performing, flexible and robust.
Automation-compatible machine design for any type of workpiece handling via robots or pallet changing system and loading portal.
Suitable for dry and wet machining with coolant pressure up to 100 bar.
|
|
Travel
- X-axis travel (Longitudinal movement of spindle head): 600mm
- Y-axis travel (Cross movement of table): 400mm
- Z-axis travel (Vertical movement of spindle head): 350mm
Table
- Table working surface: 700x450mm
- Table loading capacity: 300kg
Spindle
- The highest revolving speed: 24000min-1[30000min-1]
- Spindle taper hole: 7/24 taper,No.40(BT40)
Automatic tool changer
- Tool storage capacity: 30 tools[40 and 60]
APC/PLS
- The number of palettes: [2nd page] / [5th page]
NC equipment: FANUC 31i -MODEL A5
|
|
|
Uniwin is the latest generation Multicentre made in Biesse for the production of standard and special doors and windows. This Multicentre combines the technology of machining centres, angular plants and integrated systems while at the same time reducing piece handling time, machining time, overall dimensions and power consumption.
|
|
|
|
|
|
- VENUS -
The quick fixed bridge machining centre; very accurate and sturdy, it proves to be the ideal solution for the machining of small 3-5 axis batches in a pendular cycle. Designed for meeting any flexibility request, it offers wide application possibilities considering it compact size.
- Speed and accuracy -
The fixed bridge single-piece frame, the motion mechanisms appropriately sized for heavy-duty working loads, the high-performance digital axis and the electrospindle power contribute to guaranteeing high machining speeds in combination with positioning accuracy and finishing quality.
Venus can be configured with a wide range of operating units. The RX4 operating unit emphasises its work field width and the machining speeds. It can also be configured alternately with the 5-axis PX5 unit or the 3-4-axis TX3 operating unit.
The work table is available in the steel version with universal T-shaped guides and standard vacuum system, or with special universal clamping modules, for an immediate work table setting.
- Safety and protection -
The protection cabin and the extraction stroke of the work tables, which completely protrude from the cabin, make the workpiece load/unload operations very safe and isolate the work table (dust and chip ejection) for the total benefit of the surrounding environment.
|
|
FLEXDOOR 7000 machining centre make it possible to machine large daily amounts, even if manufacturing batches are reduced and customised. The FLEXDOOR 7000 enables machining or hardware installing on frame stiles, into a common machining line or two specialised lines "locks" and "hinges" The FLEXDOOR 7000 digital control enables high flexibility to be reached while maintaining a very high productivity. The machines also allow pins, hinges or keepers to be installed.
|
|
Designer and manufacturer of CNC machining centres for over 20 years, dubus has gathered in a number of fields a knowledge which makes it a market leader.
The CND 2000 SL allows satisfying various requirements such as machining and customising doors, joinery or stairs, and generally the machining of any large size parts of various materials.
Various equipment possibilities are available to customise the work surface and the CND 2000 SL machining unit so as to adapt it to your specific needs. For some applications, the CND 2000%u2008SL can be connected to your CAM using a DUBUS software enabling file recovery and machining programmes automatic generation.
|
|
The PVCFLEX 8001 is digitized in all its movements, offering full automation for the loading of UPVC profiles of up to 6.5 meters in lenght, followed
by cutting and machining, as well as the identification and evacuation of finished parts, at rates of 70 to 100 frames per day. Thanks to their modular design, PVCFLEX centers can also machine several ranges, brands or types of frames, e.g. : sliding and push types.
|
|
Compact with robust capabilities. The best of technology bundled together.
Rover A FT is the compact machining centre designed for high performances capable of meeting various levels of production requirements. It's the ideal machine for those who require a flexible and reliable solution.
|
|
Special Accessory:
- Side Milling head.
- 90° angle milling head.
- Coolant through spindle.
- ATC 32-40 pcs. (Continuous 18.5KW, 30 minutes: 22KW)
- Spindle power 18.5W
- Digital readout.
- Fully closed safety guard.
|
|
|
|
|
|
MCV 2000
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A BT 50 / CAT 50 / DIN 69871A
Max. spindle speed 10,000 / 12,000 / 20,000 rpm (Op) 4,000 rpm
Spindle motor 15 / 18.5 kW 22 / 26 kW
Type of transmission Belt Gear Box
Table
Table size 2,200 X 1,000 mm(86.6 X39.4 ")
Floor to table 810 mm(31.9 ")
Max. table loading capacity 3,000 kgs(6600 Lbs)
T-slot (no x Width x Pitch) 6 X 22 mm X 160 mm(6X0.9 X6.3 ")
Spindle center to column 1200 mm(47.2 ")
Travel
X-Axis 2,050 mm(80.7 ")
Y-Axis 1150 mm(45.3 ")
Z-Axis 760 mm(29.9 ")
Spindle nose to table 200-960 mm(7.9 -37.8 ")
Feed system
Rapid traverse speed X / Y: 20 M/min(787.4"/min) , Z: 15 M/min(590.6"/min)
Feed motor (FANUC) X / Z: 30 Nm (4.5KW) , Y: 22 Nm (3.8KW)
Ball screw diameter & pitch X: 63 mm(2.5 ") Y:40 mm(1.6 ") Z:50 mm /10mm(2.0/0.4")
Cutting feedrate 1-10,000 mm/min(0.04-393.7"/min)
Type of transmission X/Y: Direct mounting , Z: Belt
ATC
Tool storage capacity 30 Tools / 40 Tools (Op) 32 Tools / 40 Tools (Op)
ATC type Arm type
Max. tool diameter 76 mm ( 3" ) 127 mm ( 4.9" )
Without adjacent tool 150 mm ( 5.9 " ) 229 mm ( 9 " )
Max. tool length 350 mm ( 13.8" ) 400 mm ( 15.7" )
Max. tool weight 8 kgs ( 17.6 Lbs ) 18 kgs ( 39.6 Lbs )
Tool changing time (Tool to Tool) 2.5 sec 3.5 sec
Tool changing time (Chip to Chip) 5.5 sec 5.5 sec
Method of tool selection Random selection
bi-directional magazine rotation
|
|
UVM-450C has been developed with the concept of high speed and high quality machining, providing High Precision Aerostatic Bearing Spindle,This is a high precision machine and one of application targets is a mold of a light guiding plate from small to medium sized LCD panel by 19 inches. F-MACH443, F-MACH643 and UVM-350B are growingly combined with UVM-450C.
Molds for a light guiding plate
Precision molds from small to medium size
Precision parts related to semiconductor
|
|
The new Richmond VMC Range comprises 3 models (VMC 600 - VMC 800 - VMC 1000)
Delivering the highest productivity and reliability for your money.
Features:
Fanuc control system, motors and drives
- Simple to program and to operate
Fixed, pre-tensioned 40 mm ground ballscrews and THK ways
- Ensures usable power and precision irrespective of cutting conditions
Heavy duty 15 mm thick, low stress, ribbed cast iron walls
- Heavier machine, dampens vibration and minimises thermal growth
Class leading 625 mm throat capacity
- Extends capacity for larger jobs
Richmond electronic tool magazine
- 20 Station capacity
Extra heavy duty guideway system
- High precision 0.0025 mm repeatability and increased load capacity
A 600 Group machine
- You can buy with confidence
|
|
Travel
- X-axis travel (Longitudinal movement of table): 800mm
- Y-axis travel (Vertical movement of spindle head): 650mm
- Z-axis travel (Cross movement of Column): 700mm
Table
- Table working surface: 500×500mm
- Table loading capacity: 800kg
Spindle
- The highest revolving speed: 10000min-1 [15000min-1, 18000min-1]
- Spindle taper hole: 7/24 taper,No.50(BT50)
Automatic tool changer
- Tool storage capacity: 60 tools[90 and 90-450]
APC/PLS
- The number of palettes: 2nd page / [6th page ]
NC equipment: FANUC 31i-MODEL A5
|
|
Mold.Plus-800
Incorporating box slideways, high accuracy scale feedback system on all axes, a 20,000 min-1 spindle, Matsuura's renowned Thermal Growth Compensation System & sustained positioning accuracy of 1 micron, the Mold.Plus-800 is the machine for all modern mold and die makers.
|
|
- Cost-down is available by high speed ATC and remarkable rigid tapping speed
- Soft to human machine with oariety of support soft
- Closed to BT40 class high rigidity machine.Wide range of machining is applicable.
|
|
|
|
|
|
V33
Table
Table size 1,050 X 600 mm ( 41.3 X 23.6 " )
Floor to table 855 mm ( 33.7 ")
Max. table loading capacity 1,000 kgs( 2200 Lbs )
T-slot (number x width x pitch) 6 X 18 mm X 100 mm( 6 X 0.7 X 3.9 ")
Spindle center to column 600 mm ( 23.6 ")
Travel
X-Axis 850 mm ( 33.5 " )
Y-Axis 600 mm ( 23.6 " )
Z-Axis 510 mm ( 20.1 " )
Spindle nose to table 120 - 630 mm( 4.7 X 24.8" )
Feed system
Rapid traverse speed 32 M/min ( 1259.8 " /min )
Feed motor (FANUC) X/Y: 3.0kW (12 Nm) , Z: 7.0kW (30 Nm)
Ball screw diameter & pitch X, Y : 45 mm ( 1.8 " ) Z:50 mm ( 2.0" ) / 12mm ( 0.5" )
Cutting feed rate 1 - 10,000 mm/min ( 0.04-393.7 "/min )
Type of transmission Direct mounting
ATC
Tool storage capacity 24 / 32 (Op) / 40 (Op)
ATC type Arm type
Max. tool diameter 95 / 76 / 76 mm ( 3.1 / 3.0 / 3.0 " )
Without adjacent tool 185 / 127 / 127 mm ( 7.3 / 5.0 / 5.0 " )
Max. tool length 300 mm ( 11.8 " )
Max. tool weight 8 kgs ( 17.6 Lbs )
Tool changing time (Tool to Tool) 2.5 sec
Tool changing time (Chip to Chip) 5.5 sec
Method of tool selection Random selection
Bi-directional magazine rotation
|
|
|
The Rapid milling machine family, has been developed using the latest technology. It offers excellent versatility and yet superb rigidity, all of it at a high dynamic performance that allows to reduce costs and improve productivity.
|
|
High Speed Vertical Machining Center
FX-2
The latest Matsuura Hi-Tech Spindle 38,000 min-1 & Spindle Thermal Displacement Conpensation & Scale Feedback System for all axes.
Providing the ultimate in machining performance for the production of high precision, intricate geometry components.
High Speed Vertical Machining Center FX-2
Travel:X/Y/Z mm (in.)550 / 410 / 460 (21.65 / 16.14 / 18.11)
Working Surface mm (in.)860 x 400 (33.85 x 15.74)
Loading Capacity kg (lb.)400
Spindle Speed min-1 38,000 : BT30
Rapid Traverse:X/Y/Z m/min (ipm)30 (1,181.1)
Number of Tools 30 : BT30
NC System Matsuura G-Tech 30i
|
|
A range of CNC profilers with 3, 4 or 5 interpolated axis, for the high speed machining of very large panels made from aluminium and light alloys.
- Applications -
Machining of structural aircraft components. Milling mono-layer or multi-layer for flat parts of aircraft industry.
- Versatility -
The machine can be fitted with a wide range of alternative working units, with 3,4 or 5 axes and with a toolchanger magazine. CMS proposes different solutions of working tables to meet every customer's requirement.
- Strong rigid structure -
The rigid stabilised steel structure with fixed bridge design, table integrated to the base (Y axis with moving gantry) and the extremely rigid and strong mechanics, give high levels of accuracy, dynamism and reliability even when milling at high speeds.
- Productivity -
The machine can be supplied with different working planes equipped to carr y out the automatic loading and unloading as well as piece part recognition.
|
|
|
|
