|
|
Product Lines:
Vertical Center Nexus Series:
High Performance vertical machining center designed to provide the maximum value.
VTC Series:
Fixed table, travelling column vertical machining center available with either #50 or #40 spindle taper. Fast tool changes and high speed positioning.
Moldmaker & Super Moldmaker:
Double column Machining Centers for high precision dies and molds.
FJV Series:
High accuracy and high rigidity vertical machining centre featuring double column construction.
Mazatech V Series:
Column feed vertical machining centers.
Versatech V Series:
Large double column vertical machining centers which can machine all 5 faces in the same workpiece setup by automatically mounting a right angel head to the main spindle. |
|
The advanced machine design of the DMC 35 V series delivers superb quality at an unbeatable price. The series comes standard with the most requested features like a 10,000 rpm motor spindle, 20x-tool magazine with double gripper, high rapid traverse speeds and high-tech controls with 3D-software. With spindle speeds up to 18,000 rpm, high dynamics and excellent sturdiness, the DMC 64 / 104 V linear suitable both for high volume chip removal and machining in the tool and mould sector. The tool magazine with 30 pockets and fast pick-up tool changer for setup parallel to production time lead to minimal idle times and delivers top productivity.
|
|
Main Features :
High-Precision Spindle with Low Thermal Distortion
- Stable & high-performance spindle
- Direct-driven spindle
- Jacket cooling
Loading Capacity
- Axis travels(X/Y/Z) : 1,150/550/550mm(45.3”±/21.7”±/21.7”±)
- Table load capacity : 800kgf(1,764lb)
High-Efficiency & High-Productivity
- Rapid traverse : 40/40/30m/min
High-Efficiency Machining Control
- HAI(Hwacheon Artificial Intelligence)
- HECC(Hwacheon Efficient Contour Control)
- Tool overload protector |
|
Features:
Hardened and precision ground guide-ways are Turcite-B coated. Extra wide box ways design increase contact surface area for higher stability, faster positioning and heavier cutting.
The multi-speed spindle adopts top quality German-built Z.F. dual section gear box. Fully sealed immersion type lubrication with oil chiller circulates coolant and keeps the machine running cool even at 10,000 rpm. (Optional: KMV-8VC).
The spindle runs on high precision taper roller bearings which allow for any type of heavy duty cutting without vibration.
The Z axis is balanced with Nitrogen in conjunction with pneumatic Nitrogen cushioning of the headstock for automatic balancing during vertical motion. Perfectly level and smooth action eradicates vibration. (Optional: KMV-8VC)
Lubricant is pressure fed at a volumetric ratio for even distribution at all critical points for optimal lubrication.
All three axes employ C3 grade high precision ball screws, each with dual pretension nuts and internal cooling ducts with preloaded support at both ends.
The spindle and ball screws at all three axes are cooled by re-circulated oil which passes through an oil chiller, dispelling heat deformation (optional: KMV-8VC).
The disc type system is fast and compact. Arm movement is smooth with excellent repeatability. Tool change time is 2.5 seconds (BT40).
Compatible with a variety of CNC control systems including Fanuc, Mitsubishi, Siemens, Heidenhain or Italian Selca..
Sizes available from 820 × 600× 600mm to 1600 × 815 × 815mm ( X × Y × Z ).
|
|
Optionally with Fanuc Control 0i-MB
Siemens 802D control
optionally with Fanuc OMD control
easy and comfortable operation
high-quality components for maximum reliability
linear guideways
rapid feed up to 950”/min.
16-station pneumatic tool changer |
|
MV-30i
X / Y / Z axex travel 800/510/510mm
Table size (LXW) 890/510 mm
Spindle speeds 8,000 rpm
Spindle Motor(HP) 10 HP
|
|
BZ 6000
The BZ is designed for machining long, heavy workpieces and offers
all production possibilities of a modern CNC-machining centre. The
sturdy layout even allows the machining of stainless steel. |
|
MOLD MAKER & SUPER MOLD MAKER
These machines have an extremely rigid double column design and highly responsive feed system, with comprehensive counter measures for thermal distortion, and various CNC functions ensure high quality die and mold machining.
The sub-micron CNC and high-accuracy scale feedback system for all 3 axes on the SUPER MOLD MAKER-u ensure high quality finishes that minimize manual polishing.
The optional HSK-E40, 40000 rpm spindle features minimized vibration and heat displacement for higher productivity, high quality machining, and longer tool life. |
|
Our company is specialized in design and construction of NUMERICAL CONTROL MACHINING CENTRES 3, 4, 5 axis for cutting and machining soft materials (aluminium, composites, plastic, wood).
Ranges of application are extremely different (aeronautics, automobil and plastic industries, appearance cover, houseold furniture, naval construction, shaping, molds and patterns...).
Our range represents single and multispindle machines with and without automatic tool changers.
Standard capacities from 2000 mm x 1000 mm to 40 metres x 6 metres.
Machines are designed with :
- moving gantry and fixed table for long products,
- fixed gantry and one moving table for smaller components and two moving tables for higher productivity.
- overhead moving gantry.
High velocity movements due to brushless or linear motors combined with high speed spindles allow increased productivity. The installation of an automatic Tool Changer or multi-spindles also allows the regrouping of different operations within the same machining area.
The efficiency increases by a connection between your CAD system and CRENO CAD CAM softwares :
- complexe 5 axes machine(mould or triming)
- nesting software for optimizing the use of material.
We trust our product range is of interest to you, please do not hesitate to contact us for any further information. |
|
FJV series Double Column Machining Centers
These high-accuracy, high-rigidity vertical machining centers feature double column construction. They all have high performance spindles and are available with a wide range of table sizes up to 3000 x 2000 mm (118.11" x 78.74") which is required to machine large size liquid crystal panel production components. |
|
LCV-1100
X / Y / Z axex travel 1100/510/510 mm
Table size (LXW) 1250X500 mm
Spindle speeds 10,000 rpm
Spindle Motor(HP) 15 HP
|
|
AP 6500
The machines of the AP series are perfectly adapted for the
requirements of the window and construction steel manufacturers.
Taking into account our basic machine concept, customer requirements
can be satisfied by unique solutions for every manufacturing demand. |
|
MV-50i
X / Y / Z axex travel 1270/635/500mm
Table size (LXW) 1420X610 mm
Spindle speeds 8,000 rpm
Spindle Motor(HP) 20 HP
|
|
1.Rigid double column construction, Y axis is one piece cast in arch-bridge design, X axis stand alone at the bed, the displacement and overhang will never happen to this machine.
2.Three axes employ the roller type linear motion guide to get better rigidity.
3.Highly efficient and versatile built-in spindle motor allow powerful output 25KW at 12000rpm, and maximum torque output 235Nm, special for die/mold.
4.DV-series is suit for auto mold, plastic injection mold, die-casting mold, high speed machining, also fit for aerospace and machine precision parts. Data server, 64 bit RISC processor, and AI, NURBS interpolation, enable high-speed, high precision machining of die.
|
|
Features:
The machine base, columns, cross beam, work table, slide ways, head and all cast parts are of top grade Meehanite Cast Iron. All components are subjected to annealing, which dispels any internal stress and prevents deformation.
The Z axis is built with tough cast iron box construction designed for heavy loads and analyzed for internal stress, also reinforced with rugged internal rib support.
Ultra wide ladder type cross beam with dual LM linear guide ways ensures rigidity of the spindle and wards off tilting.
Both X and Y axes are equipped with high precision heavy duty LM guide ways.
The standard integrated direct drive spindle employs two pairs of ultra-precision taper roller bearings with oil chiller cooling system. Long nose spindles are available as per customer requirements.
All three axes adopt pretension super precision hollow core ball screws integrated with a flow- through pressurized coolant system for constant cooling.
The disc type system is fast and compact. Arm movement is smooth with excellent repeatability. Tool change time is 2.5 seconds (BT40).
Dual screw type chain driven chip conveyers eliminate debris efficiently.
Every machine undergoes parameter laser testing and fine tuning before shipment. Each comes with its own certificate of laser testing.
The Z axis is balanced with Nitrogen in conjunction with dual pneumatic cylinders Nitrogen cushioning of the headstock for automatic balancing during vertical motion.
The multi-speed spindle is matched with top quality German-built Z.F. dual section gear box. Fully sealed immersion type lubrication with oil chiller circulates coolant and keeps the machine running cool.
The control panel positioning is adjustable so that operators get the most advantageous viewpoint throughout various stages of processing.
Sizes available from ( 1800~2500 )mm by ( 2200~6200)mm.
|
|
Special Accessory:
- Side Milling head.
- 90° angle milling head.
- Coolant through spindle.
- ATC 32-40 pcs. (Continuous 18.5KW, 30 minutes: 22KW)
- Spindle power 18.5W
- Digital readout.
- Fully closed safety guard.
|
|
1.The new KMC-G series, a high rigidity fixed table gantry design, is capable of cutting very long and large components and has the stabilized machining accuracy.
2.Floor space saving up to 25%.
3.Stationary table has the maximum load of 10000 kgf/m2 (2044 lb/ft 2 ).
4.The X, Y-axes utilize a superior step design whereby the lower slideway is offset forward from the upper slideway. This greatly enhances the static rigidity.
5.Unique design of 2-speed gear spindle head features that the spindle and motor are symmetrically put on the center line.
6.KMC-G series have Preloaded Rack and Pinion Drives on X and Y-axis; 30 m/min rapid feedrate can be achieved under heavy load carrying.
7.Roller packs for the movement of carriages are used on 3-axis inserted boxways.
8.2-position AAC(Automatic Attachment Changer) is designed for improving productivity.
9.Automatic 30 degree angle head, extension head, index universal head and 5-axis head are optional accessories for wide application of multi-face and 5-axis machining
|
|
This state-of-the-art CNC milling machine features
easy to use Siemens 802C CNC control and powerful axis servo-drives.
Linear guides on a solid cast-iron frame ensure optimum axis acceleration and high stability.
servo-drives on all 3 axes
pneumatic tool clamping
fully enclosed workspace |
|
PF 6500
Highly developed, robust and reliable ...
The design of the PF is based on the proven concept of the AP-series.
The bridge-type layout gives a far greater range of applications.
Each detail shows the experience and know-how of our highly qualified technicians.
... and flexible.
The range of applications reaches from machining of compact workpieces to 3-side-machining of workpieces with a length of 6,5 m. We can also construct special lengths for you and equip your machine with clamping devices, which are perfectly adapted to your applications.
Our strongest argument:
High-grade-steel machining. |
|
Heavy duty cutting & High speed machining
- Cartridge type of spindle : ISO 50 8,000rpm (Opt. 12,000rpm)
- High power spindle motor : 30/25kW(40/34HP)
- Jet lubrication : Hi-YUN (Sepcial lubrication oil]
- High dignity machining for large die & mold
- Large and wide stroke : 2,500x1.050x850mm(98.4*x41.3"x33.5")
- The widest table size in this class : 2,800x1.050mm(110.2*x41.3")
- HWACHEON's own software to control machining efficiency
- HAI (Hwacheon Artificial lntelligence)-Std.
- HECC (wacheon Efficient Contour Control)-Std. J) (Hwacheon Tool Load Detect)-Opt.
- NANO smoothing interpolation [with RISC Board)-Opt.
- OPTIMA HTLD-Opt.
- HATS (Hwacheon Auto Tuning SystenvOpt. |
|
Our most popular Knee Mill, combining the patented MillSlide® with our Centurion control, is one of the largest and most powerful Knee Mills in its class!
Oversized 4.125" quill with #40 taper
7.5 HP spindle with back gear
Patented MillSlide® construction offers a robust solution to Z axis travel without compromising manual quill operation
Fully programmable direct drive spindle offers higher spindle speeds, smoother operation and lower maintenance costs
Adjustable ram increases machine "throat" offering large machine capabilities at a small machine price
Rigid tapping available as an option
DRO operation in manual mode
Conversational programming
"Skill Level Select" software
Manual teach
Ground ball screw construction
True encoder positioning feedback
Graphic program verification
One event MDI canned cycles
Knee mills with ball screw driven quill designs are obsolete. Knee mills are for environments needing maximum flexibility. The Milltronics knee mills are simply the most exceptional knee mills ever marketed. The Milltronics patented Millslideā redefines versatility, rigidity, and operator friendliness, and is the most innovative vertical axis solution ever invented for the knee mill. Simply stated, the Partner VK2, VKM3 and heavy duty VKM4 knee mills with the MillSlideā are undoubtedly the very best toolroom milling machines in the world. Combined with a unique CNC system with exceptional value at low cost, we are sure you will come to the same conclusion. |
|
|
|
