|
|
Annular Cutters
Aluminum
Stainless steel
Steel
Blue "carbide hard" surface treatment
Universal shank
Fully ground extra large flutes |
|
| Routers for Fiberglass and Non-Metallic Materials in Fractional and Metric...Quality selection of Wood Routers |
|
MEGAVANT HC90
- high feeds in 90° cutting angle operations
- suitable for roughing and finishing with the same insert
- high volume machining high rentability
Shoulder milling cutter EP90
- tangential design with ENHQ-insert
- "genuine" four cutting edges
- ENHQ-insert can be unded in other AVANTEC milling tool systems
- large chip chambers
- suitable for materials that form long continuous chips
Shoulder milling cutter EV90
- tangential design with ENHQ-insert
- "genuine" four cutting edges
- reduction of costs because of reduction of inserts
- smaller chip chambers utilizing a fine pitch design
- very suitable for unstable or thin parts |
|
Side milling cutter TN18 / TB18
- a balanced smooth cut is provided by using right an left hand inserts
- high precision of radial and axial run out
- very precise width of cut
- slot ground because of ground T-form insert
Side milling cutter tangential EN18 / EB18
- ENduro-insert guarantees 4 "genuine" cutting edges
- fine tooth pitch through tangential ENHQ insert style
- smooth cutting through cut division of left- and right handed inserts |
|
End Mills
Unequal Helix, for Stainless Steel and exotic alloys
Cutters for Aluminium
Suitable for High Speed Machining |
|
RESISTOR PEARL is the latest up-to-date milling technique from Carmon:
PEARL coating is the combination of a layer of hard coating (TiCN) with a lubricating layer (Movic). The first layer gives, with its hardness (3.500 HV), a strong protection against wear, while the lubricating layer reduces friction, thus achieving excellent chip removal. Particularly suitable for stainless steel machining, PEARL is now being applied on the Carmon premium quality ripper cutters of the RESISTOR series (ASP2052).
We exhibit at MACH-TOOL 08 in Poznan (Poland) from 9th to 12th June 08. We look forward to wellcome you in our stand no.38 in the Hall 9. |
|
| Complexe tooling systems will be modulated during the machining process. This is the reason why they belong to the premieure league of special tools. The manufacturing of these tools needs long experiences in special tool design and construction and a high precision production. |
|
PCD form tools for machining automotive parts and light alloys (Non ferrous materials). Machining internal shapes, profiles chamfers, threads, etc. ...
We also produce all kind of PCD tools for machining external diameters of aluminium parts like; PCD external profile milling mandrels or PCD tools working by interpolation motion.
All PREZISS DIAMANT PCD tools can be manufactured in any kind of clamping system and tapers; SK30, SK40, BT30, BT40, HSK FORM A, E, C, F, cylindrical shanks, Radial/axial adjustment system, etc. … |
|
| MBG diamond grinding products offer the most tightly controlled properties and characteristics of any grinding diamond in today's market. From the most well-defined crystals to highly friable irregular shapes, the MBG product line offers tailor made diamonds for a wide range of grinding applications in non-ferrous materials. |
|
The new 7791VS family of plunging cutters is ideal for fast metal removal in aerospace and mold applications. Plunging operations are faster and more productive than profiling operations.
- Ideal tool for step over-plunge-slotting and core
plunging.
- High metal removal rate and excellent chip
evacuation.
- Principally Z-axial cutting force minimizes tool
deflection and side forces.
- System extremely efficient in all roughing operations and deep
cavities.
- Ideal for aerospace and mould making industries.
- Wide range of grades and geometry for all applications. |
|
| Among the standard 1D/2D/3D millig cutter systems Kieninger is a specialist for machining aluminium and plastics with PCD and hardened steel or cast iron with CBN. |
|
CoroMill 245 is the most versatile facemill on the market. It offers an opportunity to reach the best productivity for each specific type of operation - just by combining the most suitable cutter pitch with the most relevant insert geometry and grade.
CoroMill 245 is the first choice cutter for versatile facemilling.
|
|
V590 Square Shoulder Mills
The V590 has positive top-form geometry inserts to create lower cutting forces. The cutters are designed to generate a true 90° square shoulder, eliminating secondary operations saving time and improving efficiency. Coolant through holes on end mills is standard and large chip gullets ensure efficient chip evacuation. The V590 is ideal for ramping and helical interpolation operations as well. |
|
CoroMill® 245-18 is a robust cutter with large, thick inserts capable of heavy chip removal rates. This larger version of CoroMill 245-12 widens the choices available and will cover more demanding applications.
CoroMill 245-18 is light cutting making it the power-efficient first choice facemill for most ISO-P, -M and -K materials in the ISO 50 and 60 machining centres. It is capable of milling surfaces with excellent finish – particularly when used with wiper inserts.
Reinforced cutting edges for 6-8 mm deep cuts within a feed range of 0.2 up to 0.4 mm enable the cutter to mill blanks with forging scale and large variations in required depth of cut. Under favourable conditions a max cutting depth of 10 mm is achievable.
CoroMill 245-18 is available in diameters 80-250 mm as coarse, close and extra close pitch for maximum performance in different machining conditions. |
|
The CoroMill 390 endmill offers precision performance in a class of its own. In many ways, the CoroMill 390 is the first high-precision indexable endmill. Playing in the same league as solid endmills.
The CoroMill 390 produces mirror finish surfaces and true 90° shoulders. Noise and vibration are reduced to a very low level.
|
|
HSM is not simply high cutting speed. It should be regarded as a process where the operations are performed by very specific methods and on high precision production equipment.
HSM is not necessarily high spindle speed machining. Many HSM applications are performed at moderate spindle speeds and with large sized cutters.
HSM is performed in finishing on hardened steel at high speeds and feeds, often 4-6 times conventional cutting data.
HSM is High Productive Machining of small-sized components in roughing to finishing and in finishing and super-finishing in components of all sizes.
HSM will grow in importance the more net shape the component become.
HSM today, is mainly performed on taper 40 machines.
|
|
PCD compact face milling head "IT-HEAD" of PREZISS DIAMANT for roughing and finishing operations in aluminium parts.
Specially suitable for high feed machining obtaining an outstanding surface quality.
Its monoblock construction conferes to the tool a very good stregth. This, combined to a high precision balancing turns this tool into a high performance PCD milling head with an extreme long tool life. |
|
| Among the standard 1D/2D/3D millig cutter systems Kieninger is a specialist for machining aluminium and plastics with PCD and hardened steel or cast iron with CBN. |
|
7745 VOD Series
Stellram's most versatile cutter. A strong multi-purpose cutter excellent in high temperature alloys and stainless steels using 4mm or 6mm octagonal inserts for up to a 0.445" depth-of-cut.
7745 VS Series
Excellent in tool steels and cast irons. Exceptionally thick square inserts handle tough conditions. Design allows for recessing operations. |
|
CoroMill 390 is the most versatile facemill on the market for better accessibility. It offers an opportunity to reach the best productivity for each specific type of operation - just by combining the most suitable cutter pitch with the most relevant insert geometry and grade.
CoroMill 390 is the first choice cutter for versatile facemilling.
|
|
Seco is well-known for its wide, innovative and powerful range of milling cutters and inserts for milling in almost any work material - from soft steel or easy-to-machine aluminium to difficult-to-machine super alloys.
The milling cutters and inserts represent a comprehensive range for all applications - from milling of small components in small machining centres to heavy-duty-milling in high power milling machines - in face milling, square shoulder milling, slot milling with disc mills, pocket milling with drilling end mills, contour milling with end mills and helical mills, copy milling and a lot of other operations as plunging, thread milling, spot facing, radii milling, chamfer milling etc.
|
|
Miling cutter-point 7/15 mm
APPLICATION
Expander
Code: H001
Miling cutter-point 6/12 mm
APPLICATION
Shoe band
Code: H002 |
|
The long neck form (radius + back taper) allow, according to the work piece angle to increase perceptibly the using depth of the tools.
Combined with the new cut design, it reduces breakages and vibrations. So the high speed machining is efficient.
The HARD'X coating -hardness 3700HV- allows to machine treated steels up to 65 HRC.
Materials :
Carbide
Carbide + Graph'x
Carbide + Hard'x
pages 74 and 75 from Magafor 701 |
|
The carbibe ball-end miniature end-mills magafor have an accuracy R + -0.01.
Ideal for slotting,engraving, mould shaping.
There are 3 types :
Extra short serie
Short serie
Standard serie
Materials :
Carbide
Carbide + Graph'x
Carbide + Hard'x
Diameters : 0.1mm to 16mm
pages 70 and 71 from Magafor 701 |
|
These cutters are designed for CNC machine. They allow to machine even very thin materials.
Many easy regrinds.
The radius is positionned in relation to the small Ø d1 : so it is possible to machine compound forms, small slots and holes from 0.5mm.
Materials :
Carbure
Carbure + Hard'x
Diameters : 0.10mm to 5mm
page 69 from Magafor 701 |
|
The carbide miniature routers single flute magafor are ideal for aluminium and plastics.
The available diameters ranging from 0.5mm to 3mm
page 64 from Magafor 701 |
|
The long neck form (radius + back taper) allow, according to the work piece angle to increase perceptibly the using depth of the tools.
Combined with the new cut design, it reduces breakages and vibrations. So the high speed machining is efficient.
The HARD'X coating -hardness 3700HV- allows to machine treated steels up to 65 HRC.
Materials :
Carbide
Carbide + Graph'x
Carbide + Hard'x
pages 66 and 67 from Magafor 701 |
|
|
|
