|
|
|
|
|
|
CoroMill 490
Sandvik Coromant has launched the first of a new generation of shoulder mills, the CoroMill 490, which reduces machining costs by up to 25 per cent. CoroMill 490 is a high-precision tool for applications where reduced depths of cut and less final machining are required, as with the near net shape precision forgings and castings used by machine shops for higher productivity. Less, but more precise, work is needed on these castings and forgings. This is possible with the four edge insert design of CoroMill 490 and reduces substantially the cost per component for customers.
CoroMill 390
A new range of damped silent tools from Sandvik Coromant is bringing substantial performance benefits to complement the existing range of long and slender CoroMill® 390 milling cutters. Integrated dampening offers more efficient, vibration free machining to improve the performance of cutting tools working in deep cavities and pockets. The stabilization of the machining process in this way provides wider machine utilization for face and shoulder milling, especially in long overhangs and will boost the capabilities of long reaching tools.Reducing vibration in often tricky situations provides the confidence needed to increase the cutting parameters without compromising work piece quality. This enables the achievement of greater machining success with the CoroMill® 390 - including improved component surface finish and longer tool life.
|
|
CoroMill 390 is the most versatile facemill on the market for better accessibility. It offers an opportunity to reach the best productivity for each specific type of operation - just by combining the most suitable cutter pitch with the most relevant insert geometry and grade.
CoroMill 390 is the first choice cutter for versatile facemilling.
|
|
Series 46J, 46D, 47J, 47D, 48D Solid Carbide Tip End Mill
45 Degree Helix, Center Cutting, High Precision, Grade IN2005
Diameters:
.312" and .625"
Cutting Edge Length:
.20" and .47"
Cutting Edge Radius:
Sharp, .015", .030", and .060"
|
|
Corner Rounding End Mills
FAST BREAK Series 15R1V and 15R4H
TOP ON mini_15r4h_topon
FAST BREAK PAKS Series 15R1V and 15R4H
|
|
Series 46J, 46D, 47J, 47D, 48D Solid Carbide Tip End Mill
Diameters:.312" and .625"
Cutting Edge Length:.20" and .47"
Cutting Edge Radius:Sharp, .015", .030", and .060"
|
|
Ideal for roughing applications
Hi-Pos APKT16 series nose stations have been upgraded to more robust and free-cutting Hi-Pos+ AOMT18 series
Available with 3 different shank styles, as well as in a custom engineered weldon-style shank that draws the cutter into the holder
|
|
The new SMAX face mill line featuring the DPM434R (18MM long) insert series is now available in both 0 degree and 45 degree lead angle versions.
The 0 degree lead generates true square shoulders to allow shouldering
and multiple Z-axis depth milling passes. The 45 degree lead allows for
higher chiploads and feedrates.
|
|
Diameter range from 1.00” – 4.00”
4 indexes without going to a left hand cutter.
Backdrafted relief angle for reduced side pressure in long reach applications.
Utilizes the same inserts as the QuadBore and PowerQuad milling line
End mills equipped with the TopOn adaption for reach flexibility.
All tools equipped with coolant through.
|
|
Now available in new 6.0" and 2.5" diameter cutters
Four indexable cutting edges
Low- and high-density style cutters
Top-On end mills for modular convenience
Coolant-through for chip evacuation
Precision-ground wiping flats with up-sharp ground and polished inserts
|
|
In addition to standard applications, the revolutionary self-clamping Qwik•Twist provides an excellent opportunity to solve special drilling requirements.
In order to better serve our customers performing these applications, we are now offering tap drills with “built-in” chamfer stations designed for 3/8” UNC to 7/8” UNF and M8 to M24 standard threaded holes.
|
|
Diameter range from 1.00” – 4.00”
4 indexes without going to a left hand cutter.
Backdrafted relief angle for reduced side pressure in long reach applications.
Utilizes the same inserts as the QuadBore and PowerQuad milling line
End mills equipped with the TopOn adaption for reach flexibility.
All tools equipped with coolant through.
|
|
Diameters:.312" to .750"
Cutting Edge Length:.20" and .62"
Cutting Edge Radius:Chamfer & Radius
Grades Available :IN2005
|
|
| ... products without technical information |
| |
A system based on tapping chuck ant tap adapters for complete new concept.
The simplicity of mounting the tap, the rigidity and the perfect centering makes syncronized tapping easier to manage.
AVAILABLE IN:
HSK DIN 69893
DIN 69871
DIN 69880
DIN 1835 B+E
MAS BT
|
|
Briney BT Flange Tap Holders Rigid
Briney BT Flange Tap Holders T/C
Briney NMTB Flange Tap Holders T/C
Briney Straight Shank Tap Holders Rigid
Briney Straight Shank Tap Holders T/C
Briney Tap Adapters Positive Drive
Briney Tap Adapters Torque Control
Briney V Flange Tap Holders Rigid
Briney V Flange Tap Holders T/C
|
|
No influence on setting length if the pressure of coaling liquid is equal to or less than 70 bar.
Most of the torque caused by the threading will be taken up by the square in the bottom. The hydraulic will take up the axial force.
For smaller threads than M16 you must use reducing sleeves and reducing adapters for the squares.
|
|
Techniks quick change tapping products lower your overall costs by providing a quick way to produce threads.
This tapping system is the most productive in the world. Change taps and tap sizes in only 5 seconds.
|
|
|
|
|
|
Series KSN
The tap holders of our KSN series are designed especially for use in CNC machining centers, CNC turning machines and other machine tools. The tap holders type KSN/Softsynchro are mainly used in CNC machines with synchronous spindles, due to their special constructional design. Owing to the very different requirements a tap holder has to meet, the KSN series can be divided into the following six types:
KSN for conventional thread cutting, marked with a yellow ring on the shell.
KSN/IKZ(Z)/MMS for thread cutting operations with internal coolant supply and minimum quantity lubrication (MMS) up to 10 bar (140 psi), marked with a green ring on the shell.
KSN/HD for thread cutting operations with internal coolant supply up to 50 bar (700 psi); marked with a red ring on the shell.
KSN/ICS for thread cutting with control of the thread cutting cycle.
KSN/Synchro for thread cutting on machines with a synchronous control system, for tap clamping with steel collets.
KSN/Softsynchro By installing a minimum length compensation on compression and on tension, small pitch differences between spindle and tap which would lead to high friction forces on the thread flank are compensated. An eventual increase of axial force during the thread cutting cycle is reduced to a minimum.
|
|
|
Chumpower is a Taiwan Manufacture. We offer a complete range of Tapping Chuck. Such as DIN371,JIS,ISO for different systems and with or without torque tapping collet chuck. For detail information, please click the PDF catalogs and feel free to let us know your inquiries. We will send our reply mail as soon as possible.
|
|
WFLC-WFLC..K
Quick Change Tapping Chuck, available as a monobloc or modular version, for operation on mechanically and numerically controlled machines, manufacturing centres and FMS. Extremely smoothrunning length compensation and optimal initial cutting pressure even under the most difficult conditions.
: M3-M48
|
|
DSPL-D
Tapping Chuck with wide range double chucking head for tapping on reversible drilling, tapping and turning machines.
: M3-M42
TA../MK..
Self reversing tap holder for use on drilling machines which have only manual feed facilities and which do not have a reversible spindle.
: M3-M20
GNCN,GNCK
High performance tapping attachment with integral reversing gear for tapping applications in machining centres and FMS.
: M3-M20
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
