|
|
Features :
- Multi Grooving
- Combined Grooving and Chamfering
- Overgrooving Head Milling Cutters
- Set-Tools for Grooving, Chamfering and Face Milling in one Operation
Possible Attachements :
- HTF (License SANDVIK, BTS-compatible)
- Capto (SANDVIK - System)
- KM (Kennametal - System)
- HSK
|
|
V440 Cutters
The V440 cutters have a robust design ideally suited for roughing and semi-finishing applications. The two flute design offers maximum productivity, with additional inserts providing shank protection on larger cutters. The inserts have two indexes for greater economy. The two top form geometries improve reliability and performance. Additionally, two PVD coated grades are available to ensure longer tool life. The V440 system is designed to take the most punishing cuts in the most difficult to machine materials.
|
|
The MAPAL tooling progamme was completed by a wide range of highly qualified milling tools for machining all common materials. The various sizes consist of milling cutters with PCD inserts for non-iron materials as well as ISO milling cutters featuring tangential inserts for cast iron and steel.
|
|
END MILLS FOR CARBON FIBER (CONTOURING)
HTT offers a complete range of end mills specifically designed for carbon fibers CFC / CFRP
a) Roughing and semifinishing cutters in micrograin solid carbide + Diamond coating
b) Profiling cutters in micrograin solid carbide + Diamond coating
The range of diameters stretches from 1 mm to 32 mm
Requests for special execution are anytime very welcome.
|
|
END MILLS FOR LIGHT ALLOYS ALUMINUM
These cutters are specifically designed for light alloys and aluminum machining in order to obtain excellent performances in terms of speed and feed rates as well as of excellent surface quality of the machined component.
Micrograin solid carbide without coating.
Range of diameters from 1 mm to 32 mm
|
|
Data Flute is excited to launch the next evolution of our performance proven SS series, the SSDH series. We achieve superior chip flow and evacuation through the introduction of chip-release flute form technology, and a unique inter-flute helical transition all within a patent pending design. A premium, rupture resistant substrate is the foundation to which these progressive geometries are applied. The end result is a brute of an end mill, capable of ultra-aggressive metal removal rates in ferrous material ranging from low carbon steel to high nickel alloys. This all adds up to cycle time reductions and improved machine tool productivity.
Benefits include:
- Design that virtually eliminates flute packing and obstruction
- No chatter
- Freer cutting that demands less horsepower
- Stability in aggressive applications
|
|
HTT offers a complete range of end mills specifically designed for Titanium and Inconel
a) Roughing Cutters in ASP52 OR ASP60 (Powdermetallurgy)
b) Finishing Cutters in Micrograin Solid Carbide
The coatings offered on this type of cutters is of Nanocomposite style coating.
The range of diameters stretches from 1 mm to 32 mm
Requests for special execution are anytime very welcome.
|
|
Universal-milling tools
Narrow fluted end mills, Engraving mills, Disk mills, Inside grinding mills, Saw blades
|
|
WINTER: Innovation - Precision - Performance - Quality
- all Winter milling tools according to DIN 58741
- all connections and bores for standard machines are available
- all milling tools can be delivered in metal bond
- resin bond for selected applications (fine milling)
- fine tuning for special applications possible
|
|
|
Clear cut surfaces when milling Acryl and PMMA. Fräsen per Plex is a new tooling-system, to replace polishing in most cases by machining acryl or PMMA
|
|
Universal milling tools for Duro- and thermoplastics
HSC-end mill 1F GR - ZR - SR, HSC-end mill 2F GR - ZR - SR, 14 Grad, 30 degree, 45 degree, 55 degree helix, HSC-end mill Z3 GR, ZR, SR, 30 degree, 45 degree, 55 degree Drall
|
|
|
For GFK-/CFK-materials, reinforced materials foam materials. Standard serrations type N, type WD, type GR
|
|
General description :milling tool
For Sandwich-materials like foil - lack - wood - adhesive - aluminium.
|
|
|
For PA- and PE and similar materials, soft aluminium alloys. Extremly sharp cutting geometries for best surfaces without burr
|
|
FRANKEN Micro-Line end mills
The Micro end mills are available as end mills, ball-nose and torus end mills in solid carbide K5-20FH, un-coated and TiAlN-coated. The diameter range is 0,2 - 2 mm for the end mills and ball-nose end mills, and 0,5 - 2 mm for the torus end mills. The Micro-Line end mills are available in three lengths, short (2.2 x d), long (5 x d) and extra long (10 x d).
|
|
Miniature SH 2, 3 & 4 Flute Series
New this year, we have expanded our offering of miniature
tooling. Several new sizes and lengths have been added
to this already proven series of tools. The tools are
available in 2, 3, and 4 flute designs in stub and standard
length configurations. All are available with coatings to
enhance tool life in the material you are machining.
|
|
|
The Interloc drive system was designed for extended reach machining applications, which can consist of heavy roughing or deep pocket finishing. The Interloc System is designed so that a modular tool can equal the strength of a solid shank one. The Interloc system has a large variety of straight, taper reach, CAT 40, CAT 50, and integral shanks with interchangeable cutter heads. This versatility will allow you to machine deep cavities with Ball nose, Back draft, Flat endmills, CDW style Cermet or Carbide inserts. Fast efficient roughing from feeds of 50 IPM to over 100 IPM on even low horsepower machines.
|
|
In addition to standard applications, the revolutionary self-clamping Qwik•Twist provides an excellent opportunity to solve special drilling requirements.
In order to better serve our customers performing these applications, we are now offering tap drills with “built-in” chamfer stations designed for 3/8” UNC to 7/8” UNF and M8 to M24 standard threaded holes.
|
|
HAM offers a full range of PCD facemills from diameter 50 mm to 315 mm in 1D, 2D, & 3D designs utilizing both inserts and cartridges. We also offer a high-density version that doubles the effective amount of cutting teeth to further increase productivity. Another innovative design is the chip-breaker PCD insert that is offered for our 2D cutter design. The chip-breaker inserts allow for a heavier cut with very good chip control in materials that are more difficult to manage chips.
Maximum Productivity
* highest possible efficiency due to maximum number of teeth
* PCD-cutting insert guarantees highest precision and optimal surface quality
* considerably higher tool life is achieved compared to conventional cutter systems
* the cutting adjustment is optimised and simplified by edgewise (sidewise) fine adjustment
|
|
|
DIXI Polytool has a standard range of PCD end mills, ball nose end mills as well as wheel dressers
|
|
Diameter range from 1.00” – 4.00”
4 indexes without going to a left hand cutter.
Backdrafted relief angle for reduced side pressure in long reach applications.
Utilizes the same inserts as the QuadBore and PowerQuad milling line
End mills equipped with the TopOn adaption for reach flexibility.
All tools equipped with coolant through.
|
|
|
Onsrud is offering a new line of top loading cutters to be used on manual or CNC top loading engraving machines. The solid carbide cutters are made of premium micro grain carbide and use our proven cutting geometry to produce fast, clean cuts in plastic and aluminum materials. These tools will allow you to rout and engrave on a single machine. The tools will be offered with a variety of cutting diameters. Custom sizes can be made on request.
|
|
|
Routers for Fiberglass and Non-Metallic Materials in Fractional and Metric...Quality selection of Wood Routers
|
|
|
|
|
|
The Seco Tools Turbo Square Shoulder Milling range is the industry's most comprehensive and versatile solution to all square shoulder milling requirements.
From a 5mm depth of cut with the Nano Turbo, the Micro and Super Turbo up to the Power Turbo at 17mm, Seco Tools has a square shoulder solution for every operation in every material.
The Square Shoulder milling inserts:
NANO TURBO
The Nano Turbo may be the smallest of the Turbo family, as well as the smallest in the industry, but it delivers big on performance.
MICRO TURBO
Helical Micro Turbo utilizes the advanced cutter and insert geometries of the Seco Tools Turbo system to deliver high efficiency, low power, low noise performance in a broad range of materials and operations.
SUPER TURBO
Without a doubt, the Super Turbo is the number one choice for general purpose square shoulder milling applications.
POWER TURBO
Power Turbo puts the "heavy" in heavy duty; providing maximum metal removal with free cutting inserts to make efficient use of machine power, even in demanding applications and difficult materials.
MINI SQUARE
R220.99 is a member of the square shoulder family. It is a universal cutter for slotting, contouring and face milling operations in ordinary steel (up to about 300HB) easier stainless steels and cast iron.
MIDI SQUARE
R220.99 is a member of the square shoulder family. It is a universal cutter for slotting, contouring and face milling operations in ordinary steel (up to about 300HB) easier stainless steels and cast iron.
MAXI SQUARE
R220.99 is member of the square shoulder family. It is a universal cutter for slotting, contouring and face milling operations in ordinary steel (up to about 300HB) easier stainless steels and cast iron.
SLOT MILLING
Our Slot milling product is offered in a diameter range 12 - 50 mm and fixed and coarse pitch version.
217/220.69-16
The product is offered in the diameter range 25 - 200 mm and fixed pockets, normal and closed pitch version.
220.69-15H
Our product is offered in the diameter range 50 - 125 mm and fixed pockets and coarse pitch version.
R220.90
Seco Tools' R220.90 is a square shoulder mill for heavy duty operations and large depth of cuts. Application areas are harder steels, stainless steels and cast iron.
|
|
V590 Single Station and V595 Long Edge
Engineered for your most demanding applications.
Cutters
- Cutters are designed to generate a 90º square shoulder, minimizing secondary operations
- Large chip gullets ensure efficient chip evacuation
- V590 Series offers through-the-tool coolant
Inserts
- Positive top-form geometry inserts create lower cutting forces at higher feed rates
- Inserts are interchangeable between the V590 & V595 Series
- Insert design makes these cutters ideal for ramping and helical interpolation
Specifications
- Geometry: Positive/Positive
- Applications: Roughing, channel milling, ramping, helical interpolation, plunging
- Cutter Diameters:
V590 = .375" - 6.00"
V595 = 1.00" - 2.00"
- Workpiece Materials: Steel, stainless steel, cast irons, high-temp alloys, aluminum and non-ferrous
|
|
FRANKEN Alu-Jet-Cut end mills
The Alu-Jet-Cut end mills were developed especially for HPC-volume machining in aluminium materials. Due to highest surface qualities on all working surfaces and due to a special micro geometry, in connection with a tough carbide substrate, highest machining volumes can be realised with a great degree of process safety. These end mills are available in a diameter range from 10 to 25 mm with the most important corner radii.
|
|
Milling tools for machining hard materials, high-speed cutting
radius end mills, toric end mills, multi flute end mills, also stubbed
|
|
Diameters:.312" to .750"
Cutting Edge Length:.20" and .62"
Cutting Edge Radius:Chamfer & Radius
Grades Available :IN2005
|
|
|
|
