|
|
Description
Glass length of 10.5 mm and diameter of 2.1 mm
Normally open 1 Form A contact
FeaturesRated Power (W) 0 to 10
Switching Voltage (VDC) 0 to 200
Switching Current (A) 0 to 0.5
Applications
General Purpose
Automotive
SpecificationsRated Power (W) 0 to 10
Switching Voltage (VDC) 0 to 200
Switching Current (A) 0 to 0.5
|
|
COMUS INTERNATIONAL (formerly known as CP CLARE INTERNATIONAL) is the only remaining manufacturer of MERCURY REED SWITCHES in the entire world. We can offer a complete range of mercury wetted reed switches : make contacts as well as change-over contacts, from 50VA up to 250 VA. High switching capability, very stable contact resistance and an extremely long life expectancy are the strenght of these switches.
These reed switches may still be used, not only for maintenance purposes, but also in some application area's indicated by the European ROHS Directive; monitoring and control instrumentation and medical equipment systems.
Application markets where these switches are highly used are ATE (automatic test equipment) and other test equipment, instrumentation and control equipment, power control, traffic regulation systems, etc...
|
|
The Bestact reed element is a highly reliable, broad control range reed switch that when used and implemented in various application products provides a user or manufacturing operation the utmost in uptime and throughput. Its broad control range allows a user to select one switch for any control load from TTL logic to fractional DC horsepower, thereby decreasing the various types of control devices needed for spare parts allocation while ensuring the same reliability levels.
|
|
Having our own reed switch manufacturing and beinga distributor of OKI dry reed switches, the COMUS GROUP is able to supply every market and every customer with a wide range of different reed switch types.
From very small reed switch types, as the 7 mm GC2107, the 10 mm ORD211, over the most common used 14 mm types to the heavy duty types, normally open form A or change-over form C contacts, higher pressure or vacuum high voltage switches, COMUS makes them all.
Customized reed switches are available upon request. Cutting, bending, welding extension wires, bistable solutions are commonly asked modifications.
|
|
|
The Bestact reed element is a highly reliable, broad control range reed switch that when used and implemented in various application products provides a user or manufacturing operation the utmost in uptime and throughput. Its broad control range allows a user to select one switch for any control load from TTL logic to fractional DC horsepower, thereby decreasing the various types of control devices needed for spare parts allocation while ensuring the same reliability levels.
|
|
The range of switch available from Gentech, with smd, sub miniature and miniature - Form A and From C models.
Switches can be tailored or packaged to match compatible magnets.
Commerical and Professional switching up to 70 watts available.
|
|
|
A reed switch consists of two ferromagnetic and specially shaped contact blades (reeds) positioned in a hermetically sealed glass tube with a gap between them and in a protective atmosphere. The plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination. Reed switches are available as form A (normally open) and form C (changeover), and are operated using a magnetic field generated by either a permanent magnet or current-carrying coil. The features that make the reed switch a valuable tool include compact size, low weight, quick response time, long life and low cost. Some common applications are: reed reays, automotive sensors, robotics sensors, security sensors and toys and games. They are also available in moulded packages affording protection from damage and in surface mount styles.
|
|
Our control components deliver precise, excellent performance even under high power conditions (average power to 100 Watts and peak power to 1000 Watts). We pay careful attention to understanding and controlling the performance characteristics that contribute to excellence in overall system performance. And we offer a variety of packaging options -- surface mount, drop-in and microstrip -- in a process that combines the best of both GaAs FET and pin diode technologies.
|
|
|
These switch solutions feature low noise, low voltage and low on-resistance with 50 functions offered in SPST, SPDT and Mux.
|
|
|
The MT093 is fabricated in ISO-CMOS technology providing low power dissipation and high reliability. The device contains a 8x12 array of crosspoint switches along with a 7 to 96 line decoder and latch circuits. Any one of the 96 switches can be addressed by selecting the appropriate seven input bits. The selected switch can be turned on or off by applying a logical one or zero to the DATA input.
|
|
New Analog Switching ICs - Operating Range of 2.7 V to 12 V
DG9051, DG9052, DG9053
- Input voltage range of 2.7 V to 12 V for single supply implementations and ±2.7 V to ±6 V for dual-supply implementations
- Bi-directional signal, rail-to-rail analog signal handling
- Guaranteed 2-V logic high/0.8-V logic low when operating from a single 5-V or dual ±5-V power supplies
Low Rds (on) Analog Switch Family: DG271x, DG274x, and DG2799
- Designed for Direct Battery Operation
- Low level logic control - full voltage range (1.6 V to 4.3 V)
- Rds (on) as low as 0.25 Ω typ. @ 2.7 V
- Supports continuous current up to 300 mA for Reed Relay replacement
- For portable apps.: cell phones, PDAs, set-top boxes, gaming
|
|
Broadband Switches - 75 Ohm
Simplify your next wireless design with the world's only high-performance UltraCMOS™ broadband switches. Exceptional isolation, low insertion loss and a CMOS/TTL compatible, single-pin control make Peregrine RF Switches ideal for CATV, DTV and PCTV applications.
|
|
|
Simplify your next wireless design with the world's only high-performance UltraCMOS™ RF switches. Exceptional isolation, low insertion loss and a CMOS/TTL compatible, single-pin control make Peregrine RF Switches ideal for mobile wireless and wireless infrastructure applications.
|
|
RF signal analyzers, signal generators, power meter, microwave switch systems for many applications: MIMO, WiMax, WLAN, OFDM/A, GSM, W-CDMA, TD-SCDMA
- Vector Signal Generators
- Vector Signal Analyzers (Spectrum Analyzers)
- Handheld RF Power Meter
- RF/Microwave Signal Routing Systems
- RF Measurement Cards for Integra Series Data Acquisition Systems
- RF Software
- MIMO RF Signal Analysis and Generation
|
|
|
|
|
|
The Candy Switch is used by thousands of equipment manufacturers and users world-wide to control circuits during a machine cycle. This Candy Switch can vary the "on-off" time cycle as well as the length of "on" dwell time. Each electrically controlled machine component can be synchronized to the demands of the parent machine without custom designed cams or expensive electronic devices.
The Candy Switch is available in both solid-state and electro-mechanical models. A variety of cams and switching mechanisms allow the Candy Switch to accomodate most every industrial application. The solid-state models provide precise, repeatable timing control for over 100 million cycles.
Solid State Model
For applications that require higher switching speeds and greater accuracy, Candy offers a complete line of solid-state switches. This line employs a board mounted photo scanner which reads a reflective pattern from a printed cam.
The N cam is the standard cam for most solid-state models. Alternative cams are available with different operating characteristics as described to the lower right.
|
|
|
|
|
|
General Description
A Quasi-Resonant Converter generally shows lower EMI and higher power conversion efficiency than a conventional hard-switched converter with a fixed switching frequency. The FSQ-series is an integrated Pulse-Width Modulation (PWM) controller and SenseFET specifically designed for quasi-resonant operation and Alternating Valley Switching. The PWM controller includes an integrated fixed-frequency oscillator, Under-Voltage Lockout, Leading- Edge Blanking, optimized gate driver, internal softstart, temperature-compensated precise current sources for a loop compensation, and self-protection circuitry. Compared with a discrete MOSFET and PWM controller solution, the FSQ-series can reduce total cost, component count, size, and weight; while simultaneously increasing efficiency, productivity, and system reliability. This device provides a basic platform that is well suited for cost-effective designs of quasi-resonant switching flyback converters
Features
- Optimized for Quasi-Resonant Converter
- Low EMI through Variable Frequency Control and AVS
- High-Efficiency through Minimum Voltage Switching
- Narrow Frequency Variation Range over Wide Load and Input Voltage Variation
- Advanced Burst-Mode Operation for Low Standby Power Consumption
- Simple Scheme for Sync Voltage Detection
- Pulse-by-Pulse Current Limit
- Various Protection functions: Overload Protection, Over-Voltage Protection, Abnormal Over-Current Protection (AOCP), Internal Thermal Shutdown with Hysteresis, Output Short Protection
- Under-Voltage Lockout with Hysteresis
- Internal Start-up Circuit
- Internal High-Voltage Sense FET (650V)
- Built-in Soft-Start (15ms)
|
|
austriamicrosystems analog switch family offers lowest on-resistance, excellent matching, fastest switching times and outstanding overall performance, making it ideal for demanding applications in the communications and industrial markets.
AS1741: Dual 0.8 Ohm SPST Switch NO
AS1742: Dual 0.8 Ohm SPST Switch NC
AS1743: Dual 0.8 Ohm SPST Switch NO/NC
AS1744: Dual 4 Ohm SPDT Switch NO/NC
AS1745: Dual 4 Ohm SPDT Switch NO/NC
AS1746: Dual 0.5/0.6Ohm, Low Voltage, SPDT Switch, NC/NO
AS1751: Quad 0.9 Ohm SPST Switch NO
AS1752: Quad 0.9 Ohm SPST Switch NC
AS1753: Quad 0.9 Ohm SPST Switch NO/NC
|
|
Cellular Handset Switches - 50 Ohm
Peregrine's high-performance cellular handset switches offer a simple, yet profoundly different approach to solving the toughest high-power, multi-throw switching challenges and are the first and only CMOS-based devices that can be connected directly to the GSM handset antenna.
|
|
| ... products without technical information |
| |
|
|
|
|
EE55 Series
Air Velocity Switch for HVAC Applications
The EE55 air velocity switch is designed for standard HVAC applications with a switching threshold between 2 and 20 m/s.
EE55 consists of an interchangeable sensing probe and a relay unit suitable for panel mounting. The electronics integrated in the sensing probe allow a cable length up to 10 m to the relays unit and ensure high immunity to electromagnetic perturbations.
Low angular dependence and an extension tube allows cost-effective, easy positioning of the sensing probe in ducts with diameter between 50 and 630 mm.
EE56 Series
Air Velocity Switch for lowest Velocities
EE56 air velocity switch is designed for special laminar flow and HVAC applications with a switching threshold between 0.2 and 2 m/s.
EE56 consists of an interchangeable sensing probe and a relay unit suitable for panel mounting. The electronics integrated in the sensing probe allow a cable length up to 10 m to the relays unit and ensure high immunity to electromagnetic perturbations.
Low angular dependence and an extension tube allows cost-effective, easy positioning of the sensing probe in ducts with diameter between 50 and 630 mm. For smooth plant start-up there is the possibility to set the delay time between 20 and 100 s.
|
|
|
|
see the results for the following category : 
