|
|
High inrush currents with AgSnO contacts (TV4 = 65 A)
4 kV/8 mm coil-contact
Reinforced insulation (protection class II)
Ambient temperature up to 85°C at 8 A
Plastic materials according to IEC60335-1 (domestic appliances)
RoHS compliant (Directive 2002 / 95 / EC) as per
Applications
HVAC, interface technology, power supplies, TV-/Monitor control,
computer-/communication technology, domestic appliances, Hi-Fi
products, timers, etc |
|
- contains RM40, RM50, RM84, RM84 SMD, RM85, RM85 inrush, RM85 faston, RM85 SMD, RM85 105 °C, RM87, RM87 SMD, RM96, RA2, RM960, RMB961, RMB962, RM699V, RM699H, RM63, RMB631, RMB632, RM64, RMB641, RMB642, RM83, RM92, RM93, RM94
- Range of rated load: from 5A up to 16A
- Range of coil voltage: from 5 up to 220 V DC and from 6 up to 380VAC
- Assembly: plug-in sockets for DIN rail or for panel, PCB |
|
| Yaskawa's Bestact high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available. |
|
- contains RSM850, RSM850B, RSM822, RSM832, RSM954, RSM957
- Range of rated load: from 0,5A up to 5A
- Range of coil voltage: from 3 up to 48 V DC
|
|
The SK range for PCB mount is available in 2 cases :
SKA / SKB (AC output) or SKD (DC output).
SKA up to 6A 230 or 400VAC with built-in voltage protection, ideal for solenoid or motor control
SKB up to 4A 230 or 400VAC for resistive loads
SKD rated 3A / 60VDC or 1A / 200VDC
SKL for AC output with a ceramic substrate that can be mounted on a heatsink (see picture). The SKL range is ranging from 16A to 75A.
For the power element, our SKL use TMS2 technology (see the Power relay section introduction) reducing thermal stress and considerably
improving life expectancy. Ideal for motor control (I2t up to 5000 A2s) with high inrush current as well as heating application. Easy to protect
against short circuit with micro circuit breakers. |
|
| Electronic control circuits built on PCB’s demand relays that can be populated with the same machinery currently used in the production lines. The Magnecraft SIPS and DIPS are built in small industry standard package styles that do not require unique machinery to populate. The SIPS and DIPS can even withstand a lead-free solder re-flow process so a pin-thru-paste application is possible. |
|
| Yaskawa's Bestact™ high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available. |
|
| ... products without technical information |
| |
-- Enhances Reliability for Portable Electronics --
The Conan 1.00mm mezzanine connector system provides a mechanically secure, high density electrical interface between parallel printed circuit boards. Conan’s mechanical features and palladium/nickel/gold plated electrical contacts qualify it for higher reliability use in portable and mobile electronic equipment.
-- Features & Benefits --
> "Click" engagement assures secure mating.
> 4.15mm low profile to 7.0mm PCB stacking
> 9 sizes: from 9 to 69 positions
> Blade-on-beam contacts allow “peeling”and prevent “stubbing.”
> SMT mounting with SMT hold-down for increased strength
> Mating polarization prevents backward connections
> PCB polarization prevents manufacturing errors
> Tape and reel packaging supports automated assembly.
> High Density 1mm Mezzanine PCB Connector SystemIdeal for Portable Electronics
For more information : www.fciconnect.com
|
|
- Card-to-Cable Connector
- Grid 2.54 x 2.54 mm
- 10-64 Positions
- Termination technologies: Solder-In, SMT, Press-In, Pressure, Pin-in-Paste
- Headers straight and right-angle
- Low Profile version available |
|
- Card-to-Cable Connector
- Grid 1.27 x 2.54 mm
- Positions: 10/20/30/40/50
- Pin strip for SMT and solder wave
- Excellent Impedance values
- Outstanding contact properties (Contact resistance < 6 mOhm, mating force 0,18 N/Contact)
- Locking with plastic lever or metal clip |
|
PCB plug-in connectors
The universal plugging system
For conductors up to 2.5 mm², the MULTI CONNECTOR SYSTEM provides all prerequisites for a continuous system wiring.
Applications:
PCB plug-in connectors
Feed-through plug-in connectors,
"Floating" plug-in connection for various mounting methods
Plug-in connectors on modular terminals
Benefits:
Original WAGO CAGE CLAMP® connection allows for fast, shock-proof and maintenance-free terminal connection. Depending on type, equipped with pin or socket connector
Operation with standard screwdriver
100% protection against mismating using coding fingers
Metric or imperial pitch |
|
ODU – as a specialist for customized solutions have all key competences under one roof: design of parts, tools, manufacturing equipment, own tooling shop, molding, stamping, plating, turning, In-House-Design and manufacturing of assembly equipments.
With all these possibilities we are able to offer “customized” solutions for our customers.
Reasons for a custom specific solution are:
Function, Design, Exclusiveness, Costs
Examples for custom solutions: Connectors for Chip Card reader for diabetes device, Connector for Patient monitoring, compl. Industrial control and so on. |
|
| ... products without technical information |
| |
More than 10 years ago CERATIZIT started the development and production of blanks for PCB-tools. CERATIZIT responds to the fast changing market and the growing demand for exquisite products by innovative grades and close partnerships with our customers.
Dimensions:
- due to a improved way of production CERATIZIT is able to offer and change between various diameters and lengths of blanks within very short time.
- standard size, as sintered: diameter: 3.25 +0,1 mm, lenghth: 38.30 -0 / 0,1 mm
Grades:
- a wide range of grades for drills and routers is available
- all CERATIZIT grades are considered as high-quality products and are well-known worldwide.
|
|
PCB Drill Blanks
Sandvik Hard Materials is the world’s largest supplier of the cemented carbide blanks used in PCB cutting tools.
The progressive miniaturisation of printed circuit board design requires ever smaller cutting tools.
In order to meet performance requirements in terms of wear resistance, rigidity and toughness.
Sandvik Hard Materials has specifically developed cemented carbide grades with an extremely fine grain size.
|
|
The largest range from the industrial leader
For the connection of PCBs into their device environment, WAGO offers a large range of PCB terminals. For conductor diameters between 0.08 mm² and 16 mm², in metric or imperial pitches of 2.5 - 20 mm, or from 2.54 - 10.16 mm respectively, a suitable solution is found for everyone - of course in screw-free connection technology with CAGE CLAMP®, plug-in clamp or the versatile CAGE CLAMP® S connector. |
|
| ... products without technical information |
| |
| IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products |
|
ATE QT2256-320PXI system is designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform.
It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.
It is an In-Circuit Device / cluster tester when High Current Pin Driver options are installed and interfaced to the UUT either through clips / probes or nail bed. Standard configuration is 64 Channels high current Pin Drivers.
It has in-built 20MHz 12bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices.
Integrated Boundary Scan Test controller (Up to 4 Chains) and software package can be used to test today’s PCBs with high density / high pin count devices. Uses latest technology Boundary Scan hardware with RAM based drivers / sensors in synchronization with ATE digital and analog pin drivers.
To effectively test CPU based boards without excluding the CPU from the test, the system offers optional Qmax patented Bus Cycle Signature System. |
|
| ... products without technical information |
| |
SMD FUSES FF 470
The Bussmann SMD Tron is designed to EIA-PD-100, DWG SOPM-7243.
A high temperature body material is capable of surviving a 60 second exposure to a temperature of 215°C. Because the SMD Tron is totally sealed, it can be subjected to cleaning by a wide variety of aggressive solvents.
PICOFUSES PF 257
The PF 257 fuses are designed to safely interrupt 50A at 125V ac. This excellent performance is achieved at power factors as low as 97%. Competitive components claim similar short circuit interrupting ratings, but at 100% power factor - a condition that rarely exists in real world applications. In addition PF 257 fuses are capable of interrupting a 300A fault at 125V.
MICROFUSES FF 785
At 250V ac, the 0.5 to 3A PC-TRON can safely interrupt 50A; at 125V ac, the 0.5 to 5A versions can interrupt 10.000A.
This high breaking capacity makes the PC-TRON subminiature fuse ideal for line-side protection of power supplies.
CYLINDRICAL FUSES CT 515
5x15mm glass fuses are available with axial leads. The fuse is available with an optional sleeve of flexible fluoropolymer (UL flammability rating VW-1). The tube will self-extinguish within one minute. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
