|
|
SIF 4
The SIF4 series contains 4-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.
- Contact mounting 3NO / 1NC
- Switching current range 5 mA to 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Low coil excitation and retention capacity
- Design (LxWxH) 41 x 29.4 x 10.9 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: access control, interfaces, transportation, robotics, machine tools
|
|
SIF 6
The SIF6 series contains 6-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.
- Contact mounting 4NO / 2NC
- Switching current range 5 mA to 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Low coil excitation and retention capacity
- Design (LxWxH) 53.6 x 33.5 x 10.9 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: access control, interfaces, transportation, robotics, machine tools
|
|
SIP 6
The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents. For the highest loads during 3-phase applications and DC loads.
- Contact mounting: 4NO, as power contacts 1NO / 1NC or 2NC signal contacts
- Switching current range 10 mA to 16 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 84.6 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: hydraulic controllers, construction machinery, lifting technology, off-shore applications, door control
|
|
SIR 4 Power
The SIR4P contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 checkback contacts.
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 12 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.75 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: door controls, motion control, transportation, farm machinery
|
|
SIR 6 / SIR SEN
The SIR6, SIR6 SEN series contains powerful, compact 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 5NO / 1NC, 4NO / 2NC or 3NO / 3NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.5 W or 0.75 W
- Design (LxWxH) 58.9 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: lifts, machine tools, construction machinery, transportation, robotics
|
|
SIS 2 / SIS 3 / SIS 3 SEN
Very compact SIS2, SIS3 and SIS3 SEN series 2- and 3-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 1NO / 1NC or 2NO / 1NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 29.2 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control
|
|
SIS 4 / SIS 6
Very compact SIS4, SIS6 series 4- and 6-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 3NO / 1NC or 2NO / 2NC or 4NO / 2NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 48 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: off-shore applications, interfaces, medical technology, robotics, machine tools, remote control
|
|
SIM 2 / SIM 3 / SIM 4
The SIM2, SIM3, SIM4 series include compact 2, 4, or 6 pole relays with forcibly guided contacts in accordance with EN 50205, with extrusion-coated coil design which is also suitable for use in the ATEX area. Crown contacts for high switching reliability. Extremely high air gaps and creepage distances.
- Contact mounting 1NO / 1NC, 2NO / 1NC, 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 8 A
- Coil voltage 5 VDC to 110VDC (non-standard coils available upon request)
- Coil loss power 1 W, 0.75 W or 0.5 W
- Design (LxWxH) 24.7 or 36.1 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for DIN rail and PCB mounting
Areas of application: process technology, mining, lifting technology, interfaces, remote control
|
|
SGR 282 / SIR 282
The SGR282, SGR282Z SEN, SIR282, SIR282 SEN series include classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.04 mm grid. Extrusion-coated coil design also suitable for use in ATEX areas.
- Contact mounting 2CO
- Switching current range 10 mA to 6 A or 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 1 W, at times 0.7 W, sensitive design
- Design (LxWxH) 30.2 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- DIN rail socket with modules, PCB socket
Areas of application: process technology, mining, sensors, interfaces
|
|
SIR4, SIR4 SEN
The SIR4, SIR4 SEN series contains powerful, compact 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.36 W or 0.6 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: process technology, lifts, machine tools, vehicle construction
|
|
SIR 8 / SIR 10
The SIR8, SIR10 series contains powerful, compact 8- and 10-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges.
- Contact mounting 8- resp. 10-pole, free configurable
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 85.5 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: lifts, machine tools, farm machinery, transportation, robotics
|
|
SIP 6
The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents. For the highest loads during 3-phase applications and DC loads.
- Contact mounting: 4NO, as power contacts 1NO / 1NC or 2NC signal contacts
- Switching current range 10 mA to 16 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 84.6 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: hydraulic controllers, construction machinery, lifting technology, off-shore applications, door control
|
|
SIR 4 Power
The SIR4P contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 checkback contacts.
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 12 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.75 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: door controls, motion control, transportation, farm machinery
|
|
SIR 6 / SIR SEN
The SIR6, SIR6 SEN series contains powerful, compact 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 5NO / 1NC, 4NO / 2NC or 3NO / 3NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.5 W or 0.75 W
- Design (LxWxH) 58.9 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: lifts, machine tools, construction machinery, transportation, robotics
|
|
SIS 2 / SIS 3 / SIS 3 SEN
Very compact SIS2, SIS3 and SIS3 SEN series 2- and 3-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 1NO / 1NC or 2NO / 1NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 29.2 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control
|
|
SIS 4 / SIS 6
Very compact SIS4, SIS6 series 4- and 6-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 3NO / 1NC or 2NO / 2NC or 4NO / 2NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 48 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: off-shore applications, interfaces, medical technology, robotics, machine tools, remote control
|
|
SIM 2 / SIM 3 / SIM 4
The SIM2, SIM3, SIM4 series include compact 2, 4, or 6 pole relays with forcibly guided contacts in accordance with EN 50205, with extrusion-coated coil design which is also suitable for use in the ATEX area. Crown contacts for high switching reliability. Extremely high air gaps and creepage distances.
- Contact mounting 1NO / 1NC, 2NO / 1NC, 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 8 A
- Coil voltage 5 VDC to 110VDC (non-standard coils available upon request)
- Coil loss power 1 W, 0.75 W or 0.5 W
- Design (LxWxH) 24.7 or 36.1 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for DIN rail and PCB mounting
Areas of application: process technology, mining, lifting technology, interfaces, remote control
|
|
SGR 282 / SIR 282
The SGR282, SGR282Z SEN, SIR282, SIR282 SEN series include classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.04 mm grid. Extrusion-coated coil design also suitable for use in ATEX areas.
- Contact mounting 2CO
- Switching current range 10 mA to 6 A or 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 1 W, at times 0.7 W, sensitive design
- Design (LxWxH) 30.2 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- DIN rail socket with modules, PCB socket
Areas of application: process technology, mining, sensors, interfaces
|
|
SIR4, SIR4 SEN
The SIR4, SIR4 SEN series contains powerful, compact 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.36 W or 0.6 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: process technology, lifts, machine tools, vehicle construction
|
|
SIR 8 / SIR 10
The SIR8, SIR10 series contains powerful, compact 8- and 10-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges.
- Contact mounting 8- resp. 10-pole, free configurable
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 85.5 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: lifts, machine tools, farm machinery, transportation, robotics
|
|
... see all the products in the category
Relays
|
Spectra Series 8000 Line
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads. In many facilities today, these motor loads often are precision HVAC systems responsible for cooling sensitive electronic equipment - servers, routers, switches, pc's, etc. Any power outage or fault event could severely damage this equipment and ultimately bring all operations to a halt - resulting in huge financial losses.
Since 1940, GE Motor control centers have been designed and manufactured with demanding applications like this in mind. Built using Six Sigma quality guidelines, GE MCCs offer an enormous amount of application flexibility while adhering to the most stringent industry standards.
|
|
|
... see all the products in the category
AC drives
|
|
|
