|
|
* 10 different actuator and display components
* Two collar types
- round
- square
* Mounting hole diameter 22.3 mm
* Degree of protection: IP 65 in front of the switch panel
* Contact blocks with gold contacts, 1...42 V / 0.01 ... 100 mA
* Contact blocks with silver contacts, max. 400 V / 10 A
* Lamp socket BA9s
* Four connection types
- screw connection
- cage clamp
- quick-connect terminal
- RJ 12 connector
* AS-I contact blocks, also for EMERGENCY-STOP, safety at work
|
|
Features/Benefits:
- Low profile design saves space
- Thru-hole and surface mount models
- High pressure contact does not require tape seal for washing
- Tape and reel packaging available
- RoHS compliant
|
|
|
|
|
|
SAFETY CODED MAGNETIC SENSOR, SR series
Pizzato Elettrica extends its range of safety magnetic sensors by introducing the SR A series which distinguishes itself from the SR B series in the reduced dimensions.
Both series are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
- Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
- Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
- Centering mark on the housing as a reference for the operating distances
- Possibility of connection in series more sensors also with mechanical switches.
- Actuation from two different directions.
- Available with cable or M8 integrated connector.
- Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the machine safety field. For further information visit the web-site www.pizzato.com
|
|
|
|
|
|
Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These new products have been designed with shapes and fixing perfectly interchangeable with the previous ones and with various additional functions useful to extend the applicatory field.
The main innovation of this series is the tripping device evolved and modern, with qualitative features higher than solutions present on the market.
The electrical contact on new microswitch has been realized with higher reliability technology, thanks to the double and redundant shape, and has the possibility to carry out operations with positive opening.
The housing of the new microswitch provides the possibility to seat gaskets in order to seal the device against fine dusts or liquids up to IP65 degree.
Fastening terminals of conductors are more practical and allow the fixing of different diameter cables or the possibility to choice different bends of faston contacts. For high quantity it’s possible to supply the microswitch only with the contact NO or NC, in order to minimize purchase costs.
|
|
Miniature Switches
These miniature switches include the D4C miniature enclosed switch and the D4CC miniature limit switch. They are available in a wide variety of actuators and contact configurations.
|
|
Micro switch series suitable for all markets. Wide selection covers from U to Z type and is available in all sizes. Sealed type (Turquoise switch series) also available that is highly resistant to harsh environments.
Turquoise Stroke Switches
Super long stroke in micro-miniature size.
ABJ type Turquoise Switches
High seal performance sealed switch in super-miniature size (J type).
|
|
Series G
Through-Hole Mount Toggles
Download Specifications
Configure This Switch!
Through-Hole Mount Rockers
Download Specifications
Configure This Switch!
Through-Hole Mount Pushbuttons
Download Specifications
Configure This Switch!
Surface Mount Toggles
Download Specifications
Configure This Switch!
Surface Mount Pushbuttons
Download Specifications
Configure This Switch!
G Indicator
Download Specifications
Configure This Indicator!
|
|
Panasonic Electric Works' switches are RoHS compliant, and include snap action and safety interlock switches.
- Sealed switches with elastomer double molding and ultrasonic swaging technology protect against dust and water (IP67) and are ideal for harsh environments. Typical applications include construction and agricultural vehicles, lawn equipment, and automotive systems.
- Custom designs are available for all snap action switches, from injection molding to value added assembles and custom actuators.
|
|
Features/Benefits
* Multi-pole and multi-position
* Panel and PCB mounting
* Positive detent
* Value added capability
* RoHS Compliant
Typical Applications
* Small appliances
* Testing fixtures
* Safety equipment
|
|
Designed with the special demands of today's electronic control applications in mind, encoders provide an outstanding array of potential solutions. Since they use an integral printed circuit board, encoders offer an option for including either SMD or through-hole components as part of switch solution. Additionally, switch outputs may be sequential, BCD coded, gray coded, or customized in a virtually endless variety of ways.
HACO series features:
5-bit digital output
Universal encoder
Integrated double pole main switch available
Isolated contact system to protect against dust
Up to 24 or 26 positions
BCD and Grey Code selection
Easy connecting with egde connectors
ROHS compliant
|
|
P1, P3 and P5 Switch Disconnectors up to 315 A –
For Absolute Safety
Like T rotary switches, P switch disconnectors are manually operated switching devices without any release or switch mechanism but with a direct link between manual operating element and the contact. The contacts are positively opened on de-energization, and the auxiliary contacts are interlocked opposing contacts.
Switchable "N conductors" and/or "HI21 auxiliary contacts" can be connected to the P1, P3, or P5 switch disconnector with a make and break contact. The auxiliary make contact is always switched as a load shedding contact for control of the contactor. In this manner, the contactor assumes the switching task and the switch-disconnector only needs to disconnect the main current circuit.
|
|
|
Wide range of rotary switches, with different mounting solution available, from 4 to 16 positions, ideal for ovens and cookers, with electric rating up to 16A. Rast5 multiple connection available, to make easier the wiring and to avoid polarization mistakes, and multiple connections available for accessory uses (i.e. pilot lights). Capillary thermostat or encoder integrable.
|
|
|
The GE family of rotary switches provide a comprehensive selection to meet the requirements for the Appliance and HVAC markets. GE Appliance Controls will develop switch specific to your application using our wide variety of mounting options, circuit capability, and shaft configurations. The switches are UL and CSA approved and designed for extended life.
|
|
FR01 (submini)
10mm Rotary DIP Switches
HS (standard)
Standard Size Rotary Switches
MRA (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRB (miniature)
Logic Level Rotary Switches
MRF (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRK (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRT (miniature)
Power Level Rotary Switches
MRX (miniature)
Power Level Rotary Switches
MRY (miniature)
Power Level Rotary Switches
ND (ultra-mini)
8mm DIP Rotary Switches
PS (hi cap)
30A Rotary Switches
TS (standard)
6A Rotary Switches
|
|
|
|
|
|
Features:
* Sealed watertight per IP68.
* Snap-in panel mounting into industry standard 1.45 x .83 panel cutout.
* Unique lighting options up to three independent LED light positions.
* Lighted button.
* 3 positions in all combinations of momentary and maintained action.
* Termination options include .250" fast on, solder lug or a snap on modular connector.
Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch is an excellent replacement for rocker switches offering improved visual position indication, additional lighting options and different styling opportunities on front panels. The R2 series is a sealed, lighted rotary switch which snaps into a 1.45 x .830" industry standard rocker switch panel opening. The rotary knob snaps on to a shaft and can be installed by the panel builder for those desiring that flexibility. The R2 rotary switch provides 3 positions in all combinations of momentary and maintained action. It is capable of handling loads from logic level to 20 amps (resistive). Sealing is to IP68 (1 meter immersion) via a shaft o-ring seal in front and a potted base in the back. Termination options include .250" fast on, solder lug or a snap on modular connector. The R2 offers unique lighting options including up to three independent LED light positions which illuminate a lens on the rotary knob. The bezel and the knob can be pad printed, sublimated or laser etched with symbols and legends as needed. This design provides more legend and lighting options than traditional rocker switches, handles the full range of electrical loads and is robust enough to survive in the most demanding applications.
|
|
AS (submini)
Subminiature Slide Switches CS (miniature)
Power Rated Slide Switches
FS (miniature)
High Frequency Slide Switches JS01 (submini)
Through-hole DIP Switches
JS02 (submini)
SMT Extended Actuator Slide DIP Switches JS03 (submini)
Through-hole Piano DIP Switches
JS04 (submini)
SMT Flush Actuator Slide DIP Switches MS (miniature)
Miniature Slide Switches
SM (ultra-mini)
Ultra-miniature Slide Switches SS (ultra-mini)
Through-Hole & Surface Mount Switches
|
|
Features
- 5 current ratings
- Choice of actuator styles
- 3 terminal types (optional screw terminals available - consult factory)
- 3 contact arrangements
- Long-life coil spring mechanism
- High-temperature 150°C and 200°C available on select models (consult factory)
- Includes E13, E14, E29, E30 and G13 Series.
|
|
|
|
|
|
S Series Snap Action Switches
The S Series product group expands Eaton's snap action switch portfolio to cover all major amperages and operating forces.
A wide range of sizes and options gives customers the ability to select the most appropriate switch for their specific application.
Typical applications include computers, consumer electronics, small appliances, power tools, vending machines and packaging machinery.
Ultraminiature
The SC Series offers the smallest size with ratings of 0.1A and 3A.
A choice of operating forces, terminations and lever combinations is available.
Subminiature
Slightly larger than the SC Series, the SE/SEV Series offers more options in operating force, termination, and lever style. This series also offers a 1PDT circuit and a 1PST circuit with either NO or NC terminals. The SEV version
has VDE microgap approval.
Subminiature Waterproof
The SF Series is ideal for applications where the switch is subject to submergence of water or poor environmental conditions. It has one current rating and operating force but a variety of terminations and lever
combinations. A 1PDT circuit and a 1PST circuit with either NO or NC terminals is available.
General
The SG Series is the standard size snap switch with amperages from 0.1A to 15A, and a variety of operating forces.
With VDE approval, the SGV Series has a contact distance of larger than 3mm.
Low Torque
The SJ Series is the low torque series designed to meet applications where a light actuating force is needed.
A selection of operating forces and lever combinations is available.
|
|
Features/Benefits:
- Low differential travel, high repeatability
- Long life-150,000 cycles typical
- Single and double pole circuitry
- Sealed actuator and case
Typical Applications:
- Thermostats
- Motors
- Industrial controls
|
|
|
The turquoise stroke switch ASQ is based on a completely new type of contact system. By using sliding contacts, an extremely high overtravel of 2.5mm is achieved at optimum contact force, which greatly simplifies the installation and adjustment of the turquoise stroke switch. Furthermore, the ASQ turquoise stroke switch is bounce-free and hysteresis-free. Thanks to its IP6K7 protection class, it is ideally suited for a great variety of industrial and automotive applications.
|
|
Features
- High-precision switch with high repeat accuracy
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted); two mounting positions
- Variety of contact materials available to suit your application
- Mechanical life: up to 15 x 106 operations
- Wide variety of terminal types available
- Numerous approvals
|
|
Features
- Silicon-free version available
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted)
- Various contact materials available, depending on application
- Mechanical life: min. 1 x 106 operations
- Wide variety of connection options
|
|
Features/Benefits:
- Long and soft actuator
- Distinctive tactile feel
- 1.1 & 3 N actuation force
- Ground terminal optional
- RoHS compliant and compatible
|
|
CB (ultra-mini)
6mm Washable Tactile Switches
HP02 (submini)
6mm Tactile Switches
JB (miniature)
Nonilluminated Tactile Switches
JF (miniature)
Nonilluminated Tactile Switches
|
|
|
|
|
|
Industrial Purpose Toggle Switches - AC/DC Rated
The Industrial Toggle Switch Line employs a Quick-make/Quick-break wiping action contact mechanism. Large, well separated terminals reduce the possibility of electrical creepage and insure separation of loose wire strands from adjacent leads. These switches are designed for heavy duty applications, such as industrial power tools and floor cleaning/polishing equipment.
Circuits: 1PST, 2PST, 2PDT. Maintained contact action.
Contact Mechanism: Quick-make/Quick-break wiping action.
Contact Material:
Movable - Copper silver plated.
Stationary - Bronze silver plated.
Terminal Types:
Screw Terminals - 7320 & 7321 Series: Brass designed to accept #5-40 x 1/4² (Cat. No. 811-14) binding head screws.
Furnished unassembled.
7360 & 7361 Series: Brass designed to accept #6-32 x 1/4² (Cat. No. 811-161) binding head screws.
Furnished unassembled.
8690 Series: Brass designed to accept #6-32 x 1/4² (Cat No. 811-7248) binding head screws.
Furnished unassembled.
|
|
Features/Benefits:
- Multi-pole and multi-position
- Wide variety of actuator and termination options
- Epoxy terminal-seal compatible with bottom wash cleaning
- RoHS complaint models available
|
|
A (submini)
Washable Subminiature Toggle Switches
B (sub-mini)
Process Sealed Washable Subminiature Toggle Switches
G (ultra-mini)
Washable Through-Hole Mount Toggle Switches
G3T (ultra-mini)
Washable Surface Mount Toggle Switches
M (miniature)
Miniature Toggle Switches
M2100 (miniature)
Toggle, Rocker and Paddle Switches
M2T (miniature)
Washable Toggle Switches
P (standard)
Internationally Approved Toggle Switches
S AC/DC (std/hi cap)
High Capacity Toggles S High Cap (standard)
High Capacity Toggles
S Low Cap (standard)
Low Capacity Toggles S Med Cap (standard)
Medium Capacity Toggles
S Med/Hi (standard)
Med/Hi Capacity Toggles
WT (standard)
WT Toggle Switches
|
|
|
|
|
|
Features:
* Withstands direct water spray.
* Submersible. Designed to meet IP68.
* Fits industry standard panel openings for drop-in replacement of panel sealed and unsealed switches.
* Snap-in feature accommodates a wide range of panel cutouts.
* Switches up to 16 Amps.
* UV and Solvent resistant.
* Withstands extreme shock & vibration.
* Legends and illuminated function indicators available.
* 2- & 3-position, momentary, maintained action and center-off.
The K4 series snap-in toggle switches are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. They are totally sealed so the switch can withstand direct water spray and submersion, even during operation. They are designed to meet the international submersion specification level IP68. An optional panel seal is also available.
The K4 series is offered in single and double pole configurations. Toggle action includes 2 and 3 position, momentary and maintained operation in a combination of 13 variations.
Mounting is simple and quick; snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cut-out size specified.
Existing unsealed applications are easily upgraded to sealed functionality because the K series drops into existing panel cut-outs.
A choice of models are offered to handle current from 16 amperes to low level electronic switching levels.
|
|
AJ4
The AJ4 Toggle Switch Series provides a safety design with a contact gap greater than 3mm and high contact efficiency for a high inrush resistance.
|
|
|
|
